| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 12 |
| Windscreen wiper does not clear the windscreen effectively | 6 |
| Registration plate lamp issues | 6 |
| Rear brake binding | 4 |
| Parking brake: efficiency below requirements |3.7.B.7| | 4 |
| Registration plate issues | 3 |
| Brakes imbalanced across an axle | 3 |
| Horn not working |1.6.2a| | 2 |
| Brake hose excessively deteriorated | 2 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Rear parking brake recording little or no effort | 2 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Brake pipe excessively corroded | 2 |
| Nearside Rear Stop lamp not working |1.2.1b| | 1 |
| Offside Body or chassis is damaged, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Rear Brake pedal creeps down when held under pressure |3.3.B.1a| | 1 |
| Brake pedal spongy |3.3.B.1b| | 1 |
| Offside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Windscreen wiper blade insecure | 1 |
| Offside Rear brake disc has restricted free movement |3.5.1j| | 1 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Rear Mechanical brake component has restricted free movement | 1 |
| Nearside Rear Lower Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Exhaust emissions exceed manufacturer`s specified limit |8.2.2.2 |a|| | 1 |
| Nearside Rear Position lamp adversely affected by the operation of another lamp |4.2.3 |c|| | 1 |
| Offside Rear Position lamp adversely affected by the operation of another lamp |4.2.3 |c|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner & outer sill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area |5.3.6 |a| |i|| | 1 |
| Nearside Rear Stop lamp(s) emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
| Offside Rear Stop lamp not working |1.2.1b| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside front brake binding |3.7.B.1| | 1 |
| Nearside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Arch Step (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Arch Step (6.2.2 (d) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Shock absorbers has a serious fluid leak | 1 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Front Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Offside Front Obligatory mirror missing door mirror |8.1.1| | 1 |
| Exhaust has a major leak of exhaust gases centre box and tail pipe |7.1.2| | 1 |
| Offside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Suspension component mounting prescribed area is excessively corroded o/s lower inner and outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Nearside Front Headlamp incorrect colour |1.7.5b| | 1 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
| Offside Inner Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Body has a sharp edge caused by damage |6.1.C.1| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 1 |
| Nearside Front suspension has excessive play in a upper suspension ball joint |2.5.B.1a| | 1 |