| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 55 |
| Registration plate lamp issues | 39 |
| Windscreen wiper does not clear the windscreen effectively | 38 |
| Brake pipe excessively corroded | 23 |
| Service brake: efficiency below requirements |3.7.B.7| | 19 |
| Rear brake binding | 17 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 17 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 17 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 15 |
| Parking brake: efficiency below requirements |3.7.B.7| | 14 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 13 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 13 |
| Horn not working |1.6.2a| | 12 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 11 |
| Brakes imbalanced across an axle | 10 |
| Nearside Headlamp insecure |1.7.3| | 8 |
| Offside Rear fog lamp not working |1.3.2b| | 8 |
| Offside Headlamp insecure |1.7.3| | 8 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 8 |
| Battery insecure |1.9.1| | 8 |
| Nearside Headlamp not working on main beam |1.7.5a| | 7 |
| Offside Headlamp not working on main beam |1.7.5a| | 7 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 7 |
| Rear parking brake recording little or no effort | 6 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 6 |
| Nearside Stop lamp not working |1.2.1b| | 6 |
| Exhaust system not adequately supported |7.1.1| | 6 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 6 |
| Brake hose excessively deteriorated | 6 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 6 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
| Driver`s seat insecure |6.2.A.1| | 6 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 5 |
| Rear Exhaust system not adequately supported |7.1.1| | 5 |
| Nearside Steering rack gaiter split |2.2.D.2d| | 5 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 5 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 5 |
| Windscreen washer not working | 5 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 5 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 5 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 5 |
| Fuel system component leaking |7.2.3| | 5 |
| Offside Stop lamp not working |1.2.1b| | 5 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
| Offside Rear position lamp|s| not working |1.1.A.3b| | 5 |
| Nearside Front Direction indicator not working |1.4.A.2c| | 4 |
| Rear fog lamp not working |1.3.2b| | 4 |
| Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 4 |
| Offside Side repeater not working |1.4.A.2c| | 4 |
| Rear brake application uneven | 4 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 4 |
| Exhaust emits an excessive level of metered smoke for a non-turbo charged engine |7.4.B.3b| | 4 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 4 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 4 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 4 |
| Offside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 4 |
| Nearside Front Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 4 |
| Front brake disc in such a condition that it is seriously weakened | 4 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 4 |
| Horn not working |7.7 |a| |ii|| | 4 |
| Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii)) | 3 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 3 |
| Horn not working (7.7 (a)) | 3 |
| Nearside Front Passenger`s seat insecure |6.2.A.1| | 3 |
| Emissions not tested |7.0| | 3 |
| Main beam `tell-tale` not working |1.7.4c| | 3 |
| Nearside Front Position lamp not working (4.2.1 (a) (ii)) | 3 |
| Offside Front Headlamp insecure |1.7.3| | 3 |
| Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 3 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 3 |
| Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 3 |
| Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 3 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 3 |
| Rear fog lamp tell tale not working |1.3.1b| | 3 |
| Offside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 3 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 3 |
| Nearside Front Headlamp insecure |1.7.3| | 3 |
| Exhaust system insecure (6.1.2 (a)) | 3 |
| Nearside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 3 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 3 |
| Nearside Side repeater not working (4.4.1 (a) (ii)) | 3 |
| Nearside Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
| Nearside Rear Body has a sharp edge caused by damage |6.1.C.1| | 2 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 2 |
| Offside Front brake disc excessively pitted |3.5.1h| | 2 |
| Nearside Rear Brake cable has wires broken and is significantly weakened |3.5.1b| | 2 |
| Brake pipe inadequately clipped |3.6.B.1| | 2 |
| Nearside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Nearside Seat belt locking mechanism does not secure or release |5.2.5a| | 2 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 2 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 2 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 2 |
| All direction indicators not working (4.4.1 (a) (ii)) | 2 |
| Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 2 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 2 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 2 |
| Offside Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 2 |
| Offside Headlamp insecure (4.1.1 (c)) | 2 |
| Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
| Nearside Rear Stop lamp not working |1.2.1b| | 2 |
| Offside Rear Stop lamp not working |1.2.1b| | 2 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 2 |
| Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 2 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 2 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 2 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Offside Front Steering rack gaiter split |2.2.D.2d| | 2 |
| Offside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
| Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Nearside Windscreen wiper blade deteriorated |8.2.2| | 2 |
| Rear Exhaust mounting missing |7.1.1b| | 2 |
| Offside Steering rack gaiter split |2.2.D.2d| | 2 |
| Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 2 |
| Mechanical brake component has restricted free movement | 2 |
| Windscreen wiper not operating automatically when switched on |8.2.1b| | 2 |
| Nearside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 2 |
| Hazard warning switch inoperative (4.4.2 (a) (ii)) | 2 |
| Offside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
| Driver`s door cannot be opened from outside the vehicle |6.2.B.1b| | 2 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 2 |
| Offside Rear Rear wheel bearing rough when rotated |2.6.1| | 2 |
| Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
| Offside Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
| Headlamp not working on main beam |1.7.5a| | 2 |
| Horn not loud enough to be heard by another road user |1.6.2b| | 2 |
| Exhaust mounting missing |7.1.1b| | 2 |
| Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 2 |
| Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Side repeater incorrect colour |1.4.A.2f| | 2 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 2 |
| Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 2 |
| Parking brake lever has no reserve travel |3.1.6b| | 2 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 2 |
| Offside Rear Direction indicator not working |1.4.A.2c| | 2 |
| Hazard warning switch faulty |1.4.B.1d| | 2 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Offside Side repeater not working (4.4.1 (a) (ii)) | 2 |
| Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 2 |
| Nearside Front Service brake excessively fluctuating (1.2.1 (e)) | 2 |
| Nearside Front Headlamp insecure (4.1.1 (c)) | 2 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 2 |
| Offside Rear Direction indicator incomplete |1.5.A1b| | 1 |
| Rear Service brake indicates brake bind |3.7.D.2a| | 1 |
| Offside Headlamp not in a clean condition affecting beam image |1.2.4a| | 1 |
| Nearside Front drive shaft coupling is excessively worn |2.5.C.1c| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2| | 1 |
| Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel artch |6.1.B.2| | 1 |
| Offside Front Outer Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
| Nearside Front coil spring incomplete |2.4.C.1a| | 1 |
| Nearside Front Steering arm has relative movement at its fixings |2.2.B.1h| | 1 |
| Bonnet cannot be secured in the closed position |8.4.1| | 1 |
| Bonnet retaining device excessively deteriorated |8.4.2| | 1 |
| Nearside Stop lamp insecure |1.2.1a| | 1 |
| Nearside Side repeater insecure |1.4.A.2b| | 1 |
| Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Fluid leak harmful to the environment or a risk to other road users header tank split (8.4.1 (a) (i)) | 1 |
| Exhaust system insecure exhaust rubbers missing (6.1.2 (a)) | 1 |
| Offside Front Upper Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Spring hanger (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside brake disc in such a condition that it is seriously weakened |3.5.1i| | 1 |
| Offside brake disc in such a condition that it is seriously weakened |3.5.1i| | 1 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Fluid leak harmful to the environment or a risk to other road users fuel tank leaking |8.4.1 |a| |i|| | 1 |
| Brake load sensing valve linkage defective and function impaired |1.1.17 |a|| | 1 |
| Rear Brake load sensing valve seized and ABS not fitted or inoperative |1.1.17 |c| |ii|| | 1 |
| Nearside Front Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Offside Front Track rod end ball joint has excessive play |2.1.3 |b| |i|| | 1 |
| Offside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Front Position lamp not working |4.2.1 |a|| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Oil leaking excessively from engine |8.4.1 |a| |i|| | 1 |
| Brake pedal has insufficient reserve travel creeps down under pressure |1.1.2 |a|| | 1 |
| Offside Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
| Offside Front Lower Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Front Headlamp insecure o/s/f headlamp loose (4.1.1 (c)) | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded Rear hanger |2.4.A.3| | 1 |
| Offside Front Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen (3.5 (a)) | 1 |
| Offside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Front Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 1 |
| Nearside Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Emissions unable to be completed (8.2.2.2 (e)) | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
| Offside Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
| Fuel pipe leaking |7.2.3| | 1 |
| Nearside Inner Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| rear parking |secondary| brakes imbalanced | 1 |
| Rear Brake hose excessively damaged |3.6.B.4d| | 1 |
| Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Windscreen wiper not working (3.4 (a)) | 1 |
| Offside Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Nearside Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Front Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
| Offside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength strut (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area is inadequately repaired front area of strut mounting (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength mounting bracket behind strut (5.3.6 (a) (i)) | 1 |
| Nearside Rear Shock absorbers has a serious fluid leak | 1 |
| All direction indicators not working not flashing after 3 cycles (4.4.1 (a) (ii)) | 1 |
| Hazard warning lamps inoperative not flashing (4.4.1 (e)) | 1 |
| Rear fog lamp tell-tale not working (4.9.1 (a) (ii)) | 1 |
| Nearside Rear Rear fog lamp not working |1.3.2b| | 1 |
| Offside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
| Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired arch |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired front hanger/outrigger |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired front hanger/outrigger |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is inadequately repaired rear hanger/outrigger |2.4.A.3| | 1 |
| Offside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 1 |
| Offside Side repeater insecure |1.4.A.2b| | 1 |
| Offside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Outer Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Inner Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill step area (6.1.1 (c) (i)) | 1 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced sill step area (6.1.1 (c) (i)) | 1 |
| Fuel cap/sealing device missing (6.1.3 (b) (i)) | 1 |
| Registration plate issues | 1 |
| Nearside Front Brake pipe at imminent risk of failure or fracture (1.1.11 (a)) | 1 |
| Offside Position lamp has a product on the lens or light source which shows white light to the rear broken lense white light showing (4.2.3 (b) (ii)) | 1 |
| Offside Direction indicator not working fault on switch when operating high beam (4.4.1 (a) (ii)) | 1 |
| Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 1 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Nearside Inner Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Windscreen damaged and affecting the driver`s view of the road |3.2 |a| |ii|| | 1 |
| Nearside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Offside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Nearside Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Offside Front Windscreen wiper missing |3.4 |a|| | 1 |
| Nearside Front Windscreen wiper not working |3.4 |a|| | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Jacking point |6.1.1 |c| |i|| | 1 |
| Central Rear Brake hose porous |1.1.12 |e|| | 1 |
| Front Exhaust emissions likely to be affected by an exhaust leak |8.2.2.1 |b|| | 1 |
| Nearside Parking brake inoperative on one side low effort (1.4.1 (a)) | 1 |
| Offside Parking brake inoperative on one side low effort (1.4.1 (a)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Main beam tell-tale not working (4.9.1 (a) (ii)) | 1 |
| Offside Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Nearside Rear Road wheel badly distorted (5.2.2 (c) (i)) | 1 |
| Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt insecure (6.1.7 (g) (ii)) | 1 |
| Oil leaking excessively from engine (8.4.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength leaf spring mount at front and rear (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced sill step (7.1.1 (a) (i)) | 1 |
| Offside Tie bar/rod insecure |2.4.G.1| | 1 |
| Brake load sensing valve inoperative |3.6.E.3| | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
| Exhaust system insecure |6.1.2 |a|| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch |6.2.2 |d| |i|| | 1 |
| Horn sound not in accordance with requirements |7.7 |c|| | 1 |
| Brake load sensing valve has been disconnected and was fitted as standard |3.6.E.2| | 1 |
| Offside Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Brake pedal anti-slip provision missing |3.3.A.1b| | 1 |
| Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Front passenger seat insecure |6.2.3| | 1 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Rear Exhaust system not adequately supported |7.1.1| | 1 |
| Offside Fuel system component leaking |7.2.3| | 1 |
| Centre Exhaust mounting missing |7.1.1b| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded engine bay |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill front of wheel |2.4.A.3| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting inner sill |6.6.6| | 1 |
| Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Brake pedal creeps down while the pedal is held under pressure |3.3.B.1a| | 1 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Headlamp not working on dipped beam nearside and offside |4.1.1 |a| |ii|| | 1 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Exhaust emits clearly visible black smoke during acceleration |7.3.A.2c| | 1 |
| Headlamp not in good working order |not working| |1.2.4a| | 1 |
| Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
| Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Front Upper Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Front Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded outer sill |5.2.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |rear most mount| |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |rea most mount| |2.4.A.3| | 1 |
| Electrical wiring insecure |1.9.2a| | 1 |
| Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 1 |
| Brake hose damaged | 1 |
| Nearside Front front brake binding |3.7.B.1| | 1 |
| Offside Front front brake binding |3.7.B.1| | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Offside Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Offside Rear Suspension spring mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside front brake binding |3.7.B.1| | 1 |
| Nearside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded inner step |5.2.6| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded corner |2.4.A.3| | 1 |
| Offside Stop lamp emits other than a steady red light |1.2.1e| | 1 |
| Offside Front Drivers seat insecure (6.2.5 (a) (ii)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Front Tie bar/rod rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Nearside Direction indicators not working |1.4.A.2c| | 1 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Rear Leaf spring saddle is moving relative to the spring |2.4.B.7a| | 1 |
| Offside Rear Leaf spring saddle is moving relative to the spring |2.4.B.7a| | 1 |
| Fuel cap/sealing device sealing washer missing |7.2.4c| | 1 |
| Front passenger door cannot be opened from inside the vehicle |6.2.B.1b| | 1 |
| Front passenger door cannot be opened from outside the vehicle |6.2.B.1b| | 1 |
| Offside Front Rear wheel bearing has excessive play |2.6.2| | 1 |
| Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Exhaust system insecure 4 brackets broken (6.1.2 (a)) | 1 |
| Front Electrical wiring insecure |1.9.2a| | 1 |
| Front Passenger`s seat insecure |6.2.A.1| | 1 |
| Nearside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Nearside Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Rear fog lamp does not emit a steady red light |4.5.4 |a|| | 1 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Rear Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance dim |1.1.A.3d| | 1 |
| Exhaust emits excessive smoke or vapour of any colour |7.4.B.4| | 1 |
| Position lamp not working 1 of 2 not working. (4.2.1 (a) (ii)) | 1 |
| Nearside Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Outline marker lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Steering pivot point has excessive play |2.2.B.1g| | 1 |
| Offside Rear Leaf spring anchor bracket bolt missing |2.4.B.6c| | 1 |
| Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
| Nearside Front Body has a sharp edge caused by corrosion outer sill / door shut |6.1.C.1| | 1 |
| Offside Front Body has a sharp edge caused by corrosion outer sill / door shut |6.1.C.1| | 1 |
| Offside Front Parking brake mechanism/associated mounting prescribed area is excessively corroded outer sill / door shut |3.1.9| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Offside Front Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded rear outer sill |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded rear outer sill |2.4.A.3| | 1 |
| Exhaust system not adequately supported all rubbres |7.1.1| | 1 |
| Towbar component excessively corroded |6.6.1| | 1 |
| Rear Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Nearside Front Steering system has excessive free play detected at the steering wheel |steering rack fitted| |2.2.A.1b| | 1 |
| Central Front Engine mounting damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
| Offside Front Track rod end ball joint dust cover excessively damaged or deteriorated so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
| Offside Rear fog lamp missing |1.3.2a| | 1 |
| Steering wheel has movement relative to the column indicating looseness (2.2.1 (a) (i)) | 1 |
| Offside Front Inner Suspension arm pin or bush excessively worn Bush (5.3.4 (a) (i)) | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt Insecure (6.1.7 (g) (ii)) | 1 |
| Exhaust has a part missing |7.1.1a| | 1 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Outer Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Outer Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Front Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
| Windscreen wiper blade insecure | 1 |
| Offside Brake cable has restricted free movement |3.5.1k| | 1 |
| Offside Rear Brake cable locking device insecure |3.5.1l| | 1 |
| Brake operation has insufficient reserve pressure/vacuum to provide assistance for at least two more brake applications after the warning lamp or other device has operated |3.3.E.5b| | 1 |
| Offside Headlamp aim not tested |1.8.A.1c| | 1 |
| Offside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Rear Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
| Offside Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded |3.1.9| | 1 |
| Offside Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Rear fog lamp not working |1.3.2b| | 1 |
| Brake cable has wires broken and is significantly weakened |3.5.1b| | 1 |
| Nearside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Headlamp adversely affected by the operation of another lamp |1.7.5c| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Inner Front Ball joint has excessive play |2.2.B.1f| | 1 |
| Vehicle Identification Number incomplete |6.3.5a| | 1 |
| Power steering fluid level below minimum |2.3.1| | 1 |
| Nearside Seat belt anchorage prescribed area is excessively corroded sill |5.2.6| | 1 |
| Nearside Side repeater incorrect colour |1.4.A.2f| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Emissions not tested EXSESIVE SMOKE (8.2.2.2 (e)) | 1 |
| Nearside Rear Leaf spring anchor bracket corroded and seriously weakened FRONT & REAR ANCHOR BRACKETS (5.3.1 (b) (i)) | 1 |
| Offside Rear Leaf spring anchor bracket corroded and seriously weakened FRONT & REAR ANCHOR BRACKETS (5.3.1 (b) (i)) | 1 |
| Offside Front Direction indicator insecure |1.4.A.2b| | 1 |
| Front Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Battery insecure and likely to cause a short circuit On n/s/f floor |4.13 |a| |ii|| | 1 |
| Offside Headlamp insecure |4.1.1 |c|| | 1 |
| Nearside Front Outer Suspension arm ball joint excessively worn |5.3.4 |a| |i|| | 1 |
| Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
| Nearside Rear Parking brake inoperative on one side |1.4.1 |a|| | 1 |
| Offside Side repeater incomplete |1.5.A1b| | 1 |
| Nearside Passenger`s seat cannot be secured in the upright position. |6.2.A.2| | 1 |
| Offside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Nearside Front Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Offside Rear Seat belt anchorage prescribed area is inadequately repaired |5.2.6| | 1 |
| Rear Vehicle structure has damage which adversely affects braking or steering |6.1.A.1| | 1 |
| Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Steering column top bearing excessively worn |2.1.2c| | 1 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Centre Front Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Hazard warning tell tale not working correctly |1.4.B.1e| | 1 |
| Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear Stop lamp not working |1.2.1b| | 1 |
| Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Nearside Front Front constant velocity joint is insecure |2.5.C.1b| | 1 |
| Nearside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Offside Front Obligatory mirror missing |8.1.1| | 1 |
| Nearside Rear coil spring fractured |2.4.C.1a| | 1 |
| Offside Rear coil spring fractured |2.4.C.1a| | 1 |
| Offside Outer Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Brake has no servo assistance |3.3.B.2| | 1 |
| Brake servo insecurely mounted |3.6.A.2a| | 1 |
| Drivers seat moving inadvertently (6.2.5 (b) (ii)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Direction indicator not working |1.4.A.2c| | 1 |
| Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| rear brake recording little or no effort |3.7.B.5a| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Vehicle structure has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| An item not tested |Manual| | 1 |
| Stop lamp|s| all not working |4.3.1 |a| |iii|| | 1 |
| Hazard warning switch inoperative |4.4.2 |a| |ii|| | 1 |
| Front Position lamp adversely affected by the operation of another lamp |4.2.3 |c|| | 1 |
| Rear Position lamp not working |4.2.1 |a| |ii|| | 1 |
| Nearside Outer Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Offside Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Front Position lamp not working both sides (4.2.1 (a) (ii)) | 1 |
| Rear Position lamp not working both sides (4.2.1 (a) (ii)) | 1 |
| Nearside Headlamp aim projected beam image is obviously incorrect dipping wrong way (4.1.2 (c)) | 1 |
| Offside Front Inner Track rod end ball joint has excessive play axial arm (2.1.3 (b) (i)) | 1 |
| Offside Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Nearside Headlamp missing (4.1.1 (a) (ii)) | 1 |
| Emissions not tested engine oil low (8.2.2.2 (e)) | 1 |
| Nearside Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Position lamp switch does not operate in accordance with the requirements (4.2.2 (a)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Position lamp switch allows the rear position lamps to be switched off when the headlamps are on (4.2.2 (a)) | 1 |
| Front Position lamp switch does not operate in accordance with the requirements (4.2.2 (a)) | 1 |
| Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Headlamp aim beam image kick up to the offside both |1.8| | 1 |
| Offside Front Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Front Side repeater incorrect colour |1.4.A.2f| | 1 |
| Front Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Rear Brake pipe excessively damaged |3.6.B.2c| | 1 |
| Rear Brake pipe leaking |3.6.A.1| | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator adversely affected by the operation of another lamp side light (4.4.3 (b)) | 1 |
| Nearside Rear Stop lamp(s) adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Nearside Front Inner Suspension arm pin or bush excessively worn tca arm bush (5.3.4 (a) (i)) | 1 |
| Offside Front Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired inner crossmember not attached to outer causing nsf suspension to float (5.3.6 (a) (i)) | 1 |
| Suspension component mounting prescribed area is inadequately repaired central and o/s/f inner crossmember not welded/attached to outer crossmember (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength flitch/arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis not attached to outer flitch/inner wing (5.3.6 (a) (ii)) | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Offside Obligatory mirror seriously deteriorated, affecting the rear view |8.1.2a| | 1 |
| Position lamp switch insecure |1.1.A.1| | 1 |
| Hazard warning switch insecure |1.4.B.1d| | 1 |
| Headlamp switch insecure |1.7.1| | 1 |
| Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Towbar mounting obviously of an inappropriate size |6.6.2| | 1 |
| Towbar mounting obviously of an inappropriate type |6.6.2| | 1 |
| Towbar support obviously of an inappropriate size |6.6.2| | 1 |
| Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Outer Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Outer Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Vehicle structure is fractured and structural rigidity is significantly reduced |6.1.1 |a| |i|| | 1 |
| Nearside Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Offside Front Headlamp insecure (4.1.1 (c)) | 1 |
| Nearside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Front Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Rear Parking (secondary brake) on a single line braking system has no recorded effort at a wheel (1.3.1 (a) (ii)) | 1 |
| Front All position lamps adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Front Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Rear Direction indicators adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Front Direction indicators not working |1.4.A.2c| | 1 |
| Rear Direction indicators not working |1.4.A.2c| | 1 |
| Indicator switch faulty |1.4.A.1| | 1 |
| Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Brake pipe fouled by moving parts |3.6.B.2a| | 1 |
| Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Offside Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Nearside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Battery insecure and likely to cause a short circuit |4.13 |a| |ii|| | 1 |
| Nearside Rear Wheel bearing has excessive play most forward wheel |5.1.3 |a| |i|| | 1 |
| Offside Rear Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Rear Body component damaged and likely to cause injury Rear corners-sharp edges |chequered alloy| |6.2.1 |a| |i|| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Offside Front Headlamp aim not tested (4.1.2 (b)) | 1 |
| Nearside Headlamp aim not tested |1.8.A.1c| | 1 |
| Offside Front Seat belt retracting mechanism defective |5.2.5b| | 1 |
| Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Offside Driver`s seat fore and aft adjustment mechanism not functioning as intended. |6.2.A.3| | 1 |
| Offside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Direction indicators not working |1.4.A.2c| | 1 |
| Steering column top mounting bracket insecure |2.1.2d| | 1 |
| Nearside Front Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Offside Front Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Offside Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Steering system excessively rough tightens lock to lock (2.1.1 (a)) | 1 |
| Emissions unable to be completed engine overheating (8.2.2.2 (e)) | 1 |
| Offside Rear Leaf spring has excessive wear in a shackle pin and/or bush |2.4.B.2| | 1 |
| Central Rear Boot lid corroded and likely to cause injury |6.2.1 |a| |i|| | 1 |
| Nearside Front Passenger`s seat insecure |6.2.6 |a| |ii|| | 1 |
| Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Body panel behind rear bumper excessively corroded & rusted away |6.2.2 |d| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner arches excessively corroded causing hole near sill |6.2.2 |d| |i|| | 1 |
| Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner arch excessively corroded |6.2.2 |d| |i|| | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Excessively corroded arch causing holes & sill corroded away |6.2.2 |d| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting excessively corroded arch & sill rusting away |6.2.2 |d| |i|| | 1 |
| Nearside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Front of arch missing and excessively corroded |6.2.2 |d| |i|| | 1 |
| Offside Front Outer Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Front of arch missing and excessively corroded |6.2.2 |d| |i|| | 1 |
| Offside Front Vehicle structure is deformed and structural rigidity is significantly reduced Inside of drivers door floor rusted away |6.1.1 |a| |i|| | 1 |
| Offside Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
| Rear Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Rear Service brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
| Suspension component mounting prescribed area is excessively corroded Nearside rear top shock absorber mounting |marked| |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Offside rear shock absorber top mount |marked| |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Offside front shock absorber top mount |marked| |2.4.A.3| | 1 |
| Suspension component mounting prescribed area is excessively corroded Nearside front shock absorber top mount |marked| |2.4.A.3| | 1 |
| Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Offside Indicator tell tale inoperative |1.4.A.2a| | 1 |
| Hazard warning lamps inoperative |1.4.B.1b| | 1 |