Most common failures | No# failures |
---|
Registration plate issues | 26 |
Rear reflector on motorcycle missing |1.4.1| | 25 |
Headlamp aim out of alignment | 10 |
Registration plate lamp issues | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Horn not working |1.7.3a| | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Front Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Nearside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Offside Steering operation fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Rear Brake component is excessively corroded rear pads seperating from metal backing |3.1.5| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Central Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Stop lamp not working front brake |4.3.1 |a| |ii|| | 1 |
Rear Brake pedal pivot excessively tight (1.1.1 (a)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Stop lamp missing stop lamp not working on front swith |1.3.3a| | 1 |
Front Brake cylinder has no reserve travel and braking performance affected (1.1.16 (e) (ii)) | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies stop lamp does not illuminate on rear brake |1.3.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake performance not tested brake lever touching handle bar (1.2.1 (g)) | 1 |
Front Brake lever has restricted free movement (1.1.15 (e)) | 1 |
Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Shock absorber has a serious fluid leak L/H (5.3.2 (b)) | 1 |
Stop lamp not working not working with rear brake (4.3.1 (a) (ii)) | 1 |
Stop lamp adversely affected by the operation of another lamp not working correctly with front brake (4.3.3 (b)) | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Rear Lower Exhaust has part of the system missing |7.1.1a| | 1 |
Offside Rear Lower Exhaust has part of the system missing |7.1.1a| | 1 |
Drive chain excessively loose |6.2.1d| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Front All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Front Horn not working |1.7.3a| | 1 |
Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear Wheel excessively distorted (5.2.2 (c) (i)) | 1 |
Headlamp aim not tested |1.6| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Drive chain sprocket excessively loose (6.1.7 (c) (i)) | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Outer Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
Rear Roller brake test indicates a sticking brake brake pedal pivot binding/ not releasing |3.3.A1a| | 1 |
Throttle operating incorrectly Housing insecure - Grip sticking on bar end. |6.2.1f| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Rear Brake caliper insecurely mounted and braking performance affected Rear pad retaining pin loose. (1.1.16 (c) (ii)) | 1 |