Most common failures | No# failures |
---|
Headlamp aim out of alignment | 56 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 27 |
Steering headbearing has excessive free play |2.2.2| | 26 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 14 |
Registration plate issues | 12 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 12 |
Offside Rear Direction indicators not working |1.5.1c| | 12 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 11 |
Nearside Rear Direction indicators not working |1.5.1c| | 10 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 9 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 9 |
Exhaust is leaking and excessively noisey |7.1.1b| | 9 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 9 |
Rear reflector on motorcycle missing |1.4.1| | 9 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Riders seat insecure |6.2.1a| | 7 |
Headlamp aim beam image kick up to the offside |1.6| | 7 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 7 |
Horn not working |1.7.3a| | 7 |
Offside Rear Direction indicator not working |1.5.1c| | 7 |
Front wheel bearings are excessively rough |2.3.5b| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Front wheel bearings have excessive free play |2.3.5b| | 6 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 6 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 6 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 5 |
Stop lamp remains on when the brake is released |1.3.1e| | 5 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 5 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Handlebar mounting clamp bolt loose |2.1.1a| | 5 |
Front Position lamp not working (4.2.1 (a)) | 5 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 5 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 4 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Headlamp aim not tested |1.6| | 4 |
Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 4 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 4 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 4 |
Front Direction indicator incorrect colour |1.5.1b| | 4 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Front Front wheel bearings are excessively rough |2.3.5b| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Direction indicator incorrect colour |1.5.1b| | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Stop lamp insecure |1.3.3b| | 3 |
Headlamp aim not tested (4.1.2 (b)) | 3 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Rear Direction indicator incorrect colour |1.5.1b| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Front Brake caliper insecure (1.1.16 (c) (i)) | 3 |
Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 2 |
Upper Steering headbearing has excessive free play |2.2.2| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Rear Upper Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 2 |
Handlebar mounting clamp loose |2.1.1a| | 2 |
Headlamp insecure (4.1.1 (c)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Rear reflector on motorcycle obscured |1.4.2b| | 2 |
Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Nearside Front Direction indicator incorrect colour |4.4.3 |a|| | 2 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Front mudguard insecure |2.3.7| | 2 |
Rear Brake lever attachment screws loose |3.1.2b| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Nearside Front Direction indicator incorrect colour (4.4.3 (a)) | 2 |
Offside Front Direction indicator incorrect colour (4.4.3 (a)) | 2 |
Throttle operating incorrectly |6.2.1f| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front position lamp insecure |1.1.1c| | 2 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 2 |
Fuel cap sealing washer deteriorated |7.2.2c| | 2 |
Horn sound not in accordance with requirements (7.7 (c)) | 2 |
Rear Direction indicators not working |1.5.1c| | 2 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
Rear Brake excessively binding |1.2.1 |f|| | 2 |
Front Front position lamp insecure |1.1.1c| | 2 |
Rear position lamp incorrect colour |1.1.2b| | 2 |
Rear position lamp damaged and function impaired |1.1.1b| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Handlebar mounting so insecure that steering is adversely affected (2.2.1 (a) (ii)) | 2 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
Offside Front Direction indicator incorrect colour |4.4.3 |a|| | 2 |
Fuel system component leaking (6.1.3 (b) (i)) | 2 |
Registration plate lamp issues | 2 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Front Steering linkage has excessive free play |2.2.2| | 2 |
Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. |3.3.E1b| | 2 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Riders seat insecure (6.2.5 (a) (ii)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |