Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 10 |
Brake pipe excessively corroded | 6 |
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 5 |
Brakes imbalanced across an axle | 4 |
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
Registration plate lamp issues | 3 |
Headlamp aim out of alignment | 3 |
Offside rear brake recording little or no effort |3.7.B.5a| | 3 |
Horn not working |1.6.2a| | 3 |
Registration plate issues | 3 |
Centre Front Seat belt locking mechanism does not secure or release |5.2.5a| | 2 |
Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Nearside Front Anti-roll bar linkage rubber mounting deteriorated resulting in excessive movement |2.4.G.2| | 2 |
Driver`s seat insecure |6.2.A.1| | 2 |
Rear brake application uneven | 2 |
Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Rear rear brakes release unevenly |3.7.B.4| | 2 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
Offside Front Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings sill to floor corroded and holed |6.1.B.2| | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill to floor corroded and holed front to rear |6.1.B.2| | 1 |
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch to floor and chassis corroded and holed |6.1.B.2| | 1 |
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering inner wheel arch to front cross member corroded and holed |6.1.A.1| | 1 |
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear cross member to chassis |6.1.B.2| | 1 |
Offside Rear Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings rear cross member to chassis |6.1.B.2| | 1 |
Exhaust has a major leak of exhaust gases FRONT AND REAR |7.1.2| | 1 |
Rear Exhaust system not adequately supported |7.1.1| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Emissions not tested |7.0| | 1 |
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Nearside Front brake disc excessively scored |3.5.1h| | 1 |
Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Front brake application uneven | 1 |
Nearside Front Seat belt flexible stalk cable has broken strands |5.2.4b| | 1 |
Braking system leaking |3.6.A.1| | 1 |
Horn sounds harsh or grating |1.6.2e| | 1 |
Nearside Rear position lamp|s| insecure |1.1.A.3a| | 1 |
Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 1 |
Offside front brake juddering severely |3.7.A.2b| | 1 |
Rear parking brake recording little or no effort | 1 |
Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Front Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Front position lamp|s| not working |1.1.A.3b| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner and sills front to rear |6.2.2 |d| |i|| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill front to rear |6.2.2 |d| |i|| | 1 |
Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
Nearside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Nearside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Rear Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Rear Shock absorber casing corroded externally so the unit does not function |2.7.2a| | 1 |
Nearside Suspension component mounting prescribed area is severely distorted |2.4.A.3| | 1 |
Offside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Rear fog lamp emits a light other than red |1.3.2e| | 1 |
Nearside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
Offside Rear Leaf spring has a deteriorated shackle pin rubber bush resulting in excessive movement |2.4.B.2| | 1 |
Offside Front front brake binding |3.7.B.1| | 1 |
Offside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Exhaust emits clearly visible black smoke during acceleration |7.3.A.2c| | 1 |
Nearside rear brake recording little or no effort |3.7.B.5a| | 1 |
Fuel tank leaking |7.2.3| | 1 |
Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Brake actuating linkage mounting prescribed area is excessively corroded |3.3.A.2| | 1 |
Front front brakes release unevenly |3.7.B.4| | 1 |
Offside Rear Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Upper Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch corroded and holed |6.1.B.2| | 1 |
Brake pedal anti-slip provision incomplete |3.3.A.1b| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Front Upper Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Rear Lower Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Offside Inner Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Offside Outer Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Rear Mechanical brake component has restricted free movement | 1 |
Centre Seat belt locking mechanism does not secure or release |5.2.5a| | 1 |
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting |6.6.6| | 1 |
Offside Rear Body or chassis has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
Offside Rear fog lamp not working |1.3.2b| | 1 |
Offside Rear Service brake: efficiency below requirements |3.7.B.7| | 1 |
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting by leaf spring (6.2.2 (d) (i)) | 1 |
Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i)) | 1 |
Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting n/s & o/s wheel arch (6.2.2 (d) (i)) | 1 |
Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under seat (6.2.2 (d) (i)) | 1 |