MOT History from tests of petrol MAZDA 32s year 1994

Review the list of common MAZDA 32 failures below or to perform a specific mot history check on your MAZDA then use our popular KnowYourCar service

mot history

Pass percent:52.94%

(The average a petrol MAZDA 32 year 1994 passes without issue)

Based on:17 MOT Tests

Most common failures	No# failures
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Exhaust has a major leak of exhaust gases \|7.1.2\|	2
Rear parking brake recording little or no effort	2
Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	2
Nearside Front constant velocity joint gaiter split \|2.5.C.1a\|	2
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Registration plate lamp issues	2
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits \|7.3.D.3\|	2
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Anti-roll bar linkage has excessive play in a ball joint \|2.4.G.2\|	1
Offside Front Anti-roll bar linkage has excessive play in a ball joint \|2.4.G.2\|	1
Brake pipe excessively corroded	1
Emissions not tested \|7.0\|	1
Parking brake lever has no reserve travel \|3.1.6b\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Offside Headlamp not in good working order adversely affecting beam image \|1.2.4a\|	1
Nearside Track rod end ball pin shank loose \|2.2.B.1c\|	1
Offside Drag link end ball pin shank loose \|2.2.B.1c\|	1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Headlamp aim out of alignment	1
Nearside Rear Anti-roll bar linkage insecure \|2.4.G.1\|	1
Offside Obligatory mirror insecure \|8.1.1\|	1
Nearside Front brake disc excessively scored \|3.5.1h\|	1
Offside Front brake disc excessively scored \|3.5.1h\|	1
Offside Front Anti-roll bar linkage insecure \|2.4.G.1\|	1
Nearside Front Anti-roll bar linkage cracked \|2.4.G.1\|	1
Exhaust emissions carbon monoxide content at idle excessive \|7.3.D.4\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Exhaust has a major leak of exhaust gases \|7.1.2\|	2
Rear parking brake recording little or no effort	2
Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	2
Nearside Front constant velocity joint gaiter split \|2.5.C.1a\|	2
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Registration plate lamp issues	2
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits \|7.3.D.3\|	2
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Anti-roll bar linkage has excessive play in a ball joint \|2.4.G.2\|	1
Offside Front Anti-roll bar linkage has excessive play in a ball joint \|2.4.G.2\|	1
Brake pipe excessively corroded	1
Emissions not tested \|7.0\|	1
Parking brake lever has no reserve travel \|3.1.6b\|	1
Parking brake: efficiency below requirements \|3.7.B.7\|	1
Offside Headlamp not in good working order adversely affecting beam image \|1.2.4a\|	1
Nearside Track rod end ball pin shank loose \|2.2.B.1c\|	1
Offside Drag link end ball pin shank loose \|2.2.B.1c\|	1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Headlamp aim out of alignment	1
Nearside Rear Anti-roll bar linkage insecure \|2.4.G.1\|	1
Offside Obligatory mirror insecure \|8.1.1\|	1
Nearside Front brake disc excessively scored \|3.5.1h\|	1
Offside Front brake disc excessively scored \|3.5.1h\|	1
Offside Front Anti-roll bar linkage insecure \|2.4.G.1\|	1
Nearside Front Anti-roll bar linkage cracked \|2.4.G.1\|	1
Exhaust emissions carbon monoxide content at idle excessive \|7.3.D.4\|	1

MOT History from tests of petrol MAZDA 32s year 1994

Find us on Facebook