| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 53 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 19 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 18 |
| Stop lamp remains on when the brakes are released | 17 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 15 |
| Rear reflector missing (4.8.2 (a) (ii)) | 13 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 13 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 12 |
| Registration plate issues | 11 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 11 |
| Front Brake excessively binding (1.2.1 (f)) | 10 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 10 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 10 |
| Front Brake excessively binding |1.2.1 |f|| | 9 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 8 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 7 |
| Front Position lamp not working (4.2.1 (a)) | 7 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 6 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 5 |
| Registration plate lamp issues | 5 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
| Headlamp aim not tested (4.1.2 (b)) | 5 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 5 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 5 |
| Drive chain excessively tight (6.1.7 (k) (i)) | 5 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 4 |
| Rear Position lamp not working |4.2.1 |a|| | 4 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 4 |
| Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 4 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 4 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
| Horn not working (7.7 (a) (ii)) | 4 |
| Drive chain worn to excess |6.2.1e| | 4 |
| Front Position lamp not working |4.2.1 |a|| | 4 |
| Stop lamp not working (4.3.1 (a) (ii)) | 4 |
| Stop lamp not working |4.3.1 |a| |ii|| | 4 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 4 |
| Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 4 |
| Nearside Rear Direction indicator likely to become detached |4.4.1 |c| |ii|| | 3 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
| Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 3 |
| All direction indicators not working (4.4.1 (a) (ii)) | 3 |
| Rear Drive chain sprocket excessively loose |6.1.7 |c| |i|| | 3 |
| Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 3 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Steering headbearing has excessive free play |2.2.2| | 3 |
| Rear Brake excessively binding (1.2.1 (f)) | 3 |
| Front Shock absorber has negligible damping effect (5.3.2 (b)) | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 3 |
| Rear Brake grabbing severely (1.2.1 (c)) | 3 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 3 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Pillion seat insecure |6.2.6 |a| |ii|| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front Wheel spindle loose |5.2.1 |c| |i|| | 2 |
| Front Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 2 |
| Front Position lamp missing (4.2.1 (a)) | 2 |
| Drive chain excessively tight, so that it is likely to fail |6.1.7 |k| |ii|| | 2 |
| Rear Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii)) | 2 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
| Nearside Rear Drive chain excessively loose |6.1.7 |c| |i|| | 2 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Rear reflector on motorcycle missing |1.4.1| | 2 |
| Nearside Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 2 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 2 |
| Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 2 |
| Headlamp insecure (4.1.1 (c)) | 2 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 2 |
| Riders seat insecure |6.2.5 |a| |ii|| | 2 |
| Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
| Front Headlamp insecure (4.1.1 (c)) | 2 |
| Front Brake grabbing severely (1.2.1 (c)) | 2 |
| Offside Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Nearside Rear Drive chain excessively loose (6.1.7 (c) (i)) | 2 |
| Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 2 |
| Drive chain excessively loose |6.2.1d| | 2 |
| Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
| Upper Steering linkage locking device ineffective yoke nut |2.1.3 |d|| | 1 |
| Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
| All direction indicators light intensity significantly reduced See manual advisory regarding electrical system |4.4.3 |a|| | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Rear Footrest missing passenger footrests do not extend out (6.2.12 (a)) | 1 |
| Stop lamp not working ON ALL THE TIME
WILL NOT GO OFF |4.3.1 |a| |ii|| | 1 |
| Rear Motorcycle structure joining/attachment plate or fastening insecure rear fender insecure (6.1.1 (b) (i)) | 1 |
| Nearside Front Clutch lever positioned so it cannot be readily operated LH hand controls insecure on handle bar and clutch needs adjustment. (6.2.7 (b)) | 1 |
| Nearside Front Brake caliper insecure Front brake caliper mounting bolt too long - caliper not secure. (1.1.16 (c) (i)) | 1 |
| Nearside Front Brake pipe at imminent risk of failure or fracture Speedo cable bracket insecure and likely to interfere with braking. (1.1.11 (a)) | 1 |
| Headlamp aim not tested bulb out (4.1.2 (b)) | 1 |
| Stop lamp not working when brake 1 lever operated |4.3.1 |a| |ii|| | 1 |
| All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Stop lamp not working front brake and rear brake |4.3.1 |a| |ii|| | 1 |
| Front Brake master cylinder leaking |1.1.10 |b| |ii|| | 1 |
| Stop lamp not working Not working when rear brake applied |4.3.1 |a| |ii|| | 1 |
| Brake performance not tested Unsafe due to front brake leak and lack of pressure |1.2.1 |g|| | 1 |
| Nearside Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Nearside Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Stop lamp does not illuminate by the operation of both brake controls micro switch rear brake sticking (4.3.2 (a) (iii)) | 1 |
| Nearside Front Forks excessively deformed |2.2.2 |d| |i|| | 1 |
| Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
| Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Central Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Front Brake lever is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Front Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Roller brake test Neither brake control achieves an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Stop lamp not working front and rear (4.3.1 (a) (ii)) | 1 |
| Offside Footrest missing (6.2.12 (a)) | 1 |
| Stop lamp not working x2 (4.3.1 (a) (ii)) | 1 |
| Rear Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Position lamp not working (4.2.1 (a)) | 1 |
| Stop lamp not working Fr. brake light not working (4.3.1 (a) (ii)) | 1 |
| Front Stop lamp not working brake |4.3.1 |a| |ii|| | 1 |
| Rear Stop lamp not working brake |4.3.1 |a| |ii|| | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Offside Front Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Front Stop lamp not working not working on front brake switch (4.3.1 (a) (ii)) | 1 |
| Footrest insecure Right front footboard |6.2.12 |a|| | 1 |
| Brake pedal has insufficient reserve travel Rear brake |1.1.2 |a|| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Handlebar mounting so insecure that steering is adversely affected |2.2.1 |a| |ii|| | 1 |
| Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure side bag mounting insecure (6.1.1 (b) (i)) | 1 |
| Stop lamp not working From front control (4.3.1 (a) (ii)) | 1 |
| Front Brake hose leaking |1.1.12 |c|| | 1 |
| Rear Suspension arm mounting has an unsafe modification Affects wheel allignment (5.3.3 (c) (i)) | 1 |
| Rear Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
| Handlebar mounting insecure Both mounting bushes worn and perished. (2.2.1 (a) (i)) | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Front brake disc in such a condition that it is seriously weakened | 1 |
| Rear Brake component insecure bolt missing from brake arm (1.1.21 (c)) | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |1.1.2 |d|| | 1 |
| Headlamp insecure |4.1.1 |c|| | 1 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Steering headbearing has excessive wear or free play excessive free play (2.2.2 (f) (i)) | 1 |
| Headlamp aim not tested no dip beam (4.1.2 (b)) | 1 |
| Nearside Rear Shock absorber missing (5.3.2 (a) (ii)) | 1 |
| Offside Rear Shock absorber missing (5.3.2 (a) (ii)) | 1 |
| Nearside Clutch lever bent so it cannot be readily operated. Shortend aswell |6.2.1g| | 1 |
| Brake pedal not releasing correctly and functionality of brakes affected rear brake cable siezed (1.1.2 (b) (ii)) | 1 |
| Brake reaction bracket excessively worn bolts that hold rear torque arm loose (1.1.15 (b)) | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Front Brake disc fractured |1.1.14 |a| |ii|| | 1 |
| Rear Brake cable insecure | 1 |
| Front Chain guard insecure engine sprockit cover missing |6.1.7 |i|| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Brake hose excessively deteriorated | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Nearside Front Brake caliper leaking |1.1.16 |b| |i|| | 1 |
| Central Front Steering linkage modified such that the steering is adversely affected |2.1.3 |f| |ii|| | 1 |
| Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
| Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Nearside Front Drive chain worn to excess |6.2.1e| | 1 |
| Brake performance not tested (1.2.1 (g)) | 1 |
| Suspension arm pin or bush excessively worn Swing arm bush |5.3.4 |a| |i|| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Front Brake excessively binding wheel does not spin freely (1.2.1 (f)) | 1 |
| Central Upper Exhaust has a major leak of exhaust gases PAIR valve tube split on top of cylinder |6.1.2 |a|| | 1 |
| Front Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected |5.2.1 |c| |ii|| | 1 |
| Stop lamp not working Rear Brake |4.3.1 |a| |ii|| | 1 |
| Rear Motorcycle structure adversely modified rear wheel / mudguard fouls rear frame rendering suspension inoperative on the rear |6.1.1b| | 1 |
| Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Offside Front Brake caliper has no reserve travel and braking performance affected |1.1.16 |e| |ii|| | 1 |
| Front Brake excessively binding front caliper not releasing fully from disc (1.2.1 (f)) | 1 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Footrest insecure no/rubbers |6.2.1a| | 1 |
| Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Nearside Front Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Nearside Front Direction indicator obviously incorrectly positioned need to be min of 240mm apart (4.4.3 (a)) | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Forks excessively deformed (2.2.2 (d) (i)) | 1 |
| Horn not working does not working (unless lights turned on) (7.7 (a)) | 1 |
| Direction indicator adversely affected by the operation of another lamp both front and rear indicators affected by front head lamp (not working with head lamp off) (4.4.3 (b)) | 1 |
| Front Brake lagging in operation Suspect Air in front brake system (1.2.1 (d)) | 1 |
| Shock absorber has a serious fluid leak L/H front fork seal leaking - contaminating brake disc and pads. |5.3.2 |b|| | 1 |
| Steering headbearing has excessive wear or free play loose |2.2.2 |f| |i|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Rear Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 1 |
| Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
| Front Position lamp not working dipped beam (4.2.1 (a)) | 1 |
| Exhaust silencer insecure gases leaking front pipe (8.1.1 (b) (i)) | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Rear Footrest missing passengers footrests not fitted (6.2.12 (a)) | 1 |
| Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
| Headlamp reflector seriously defective (4.1.1 (b) (ii)) | 1 |
| Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Nearside Rear Suspension attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Rear All position lamps not working |4.2.1 |a|| | 1 |
| Front Steering headbearing in such a condition that steering control is adversely affected excessively loose |2.2.2 |f| |ii|| | 1 |
| Rear Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
| Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
| Stop lamp not working When rear brake is applied (4.3.1 (a) (ii)) | 1 |
| Footrest missing |6.2.12 |a|| | 1 |
| Wheel more than one fixing missing rear sprocket nut missing |5.2.1 |a| |ii|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Rear Footrest missing |6.2.12 |a|| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen Suspect LED bulb is compromising beam pattern (4.1.2 (a)) | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Front Upper Stop lamp not working handle bar control switch not working |4.3.1 |a| |ii|| | 1 |
| Headlamp light source and lamp not compatible |4.1.4 |c|| | 1 |
| Position lamp not working side light |4.2.1 |a|| | 1 |
| Front Stop lamp light intensity significantly reduced |4.3.3 |a| |ii|| | 1 |
| Rear Stop lamp light intensity significantly reduced |4.3.3 |a| |ii|| | 1 |
| Rear Brake cable badly frayed |3.2.A1b| | 1 |
| Brake reaction bracket insecure |3.2.A1j| | 1 |
| Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Stop lamp not working not working when front brake applied |4.3.1 |a| |ii|| | 1 |
| Front Brake excessively binding will not rotate backwards - pads jammimg up (1.2.1 (f)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Fuel cap leaking (6.1.3 (b) (i)) | 1 |
| Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced rear rack mounting cracked could fail at any time (6.1.1 (b) (ii)) | 1 |
| Rear Stop lamp not working brake light switch (4.3.1 (a) (ii)) | 1 |
| Rear Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
| Rear All direction indicators obviously incorrectly positioned incorrect spacing |4.4.3 |a|| | 1 |
| Central Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Handlebar deformed to the extent that steering is affected (2.2.1 (c) (ii)) | 1 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 1 |
| Offside Rear Footrest missing (6.2.12 (a)) | 1 |
| Rear Stop lamp lens defective such that the emitted light is adversely affected (4.3.1 (b) (ii)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Offside Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced (6.1.1 (b) (ii)) | 1 |
| Fuel system component leaking excessively or a risk of fire carb |6.1.3 |b| |ii|| | 1 |
| Brake performance not tested rear brake pedal / cable seized |1.2.1 |g|| | 1 |
| Front Brake lever so insecure that the brake cannot be readily applied |1.1.2 |e| |ii|| | 1 |
| Front Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
| Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 1 |
| Offside Front Forks excessively deformed (2.2.2 (d) (i)) | 1 |
| Steering headbearing has excessive wear or free play could be damaged as a result of fork bend. (2.2.2 (f) (i)) | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Central Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Stop lamp not working Rear brake pedal (4.3.1 (a) (ii)) | 1 |
| Direction indicator not working both front (4.4.1 (a) (ii)) | 1 |
| Headlamp aim not tested dip beam too dull no beam pattern |1.6| | 1 |
| Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
| Front position lamp deteriorated and function impaired very dull |1.1.1b| | 1 |
| Front position lamp insecure |1.1.1c| | 1 |
| Rear position lamp insecure |1.1.1c| | 1 |
| Rear Direction indicator insecure |1.5.3b| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Nearside Steering lock stop missing |2.1.3| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Brake locking device insecure torque arm bolts loose |3.2.A1e| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Rear suspension movement is excessively stiff seized does not return after being compressed |2.4.A.3b| | 1 |
| Roller brake test indicates a severely grabbing brake due to loose torque arm allowing brake drum to turn slightly |3.3.A1b| | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Shock absorber has a serious fluid leak lh fork leg seal leaking (5.3.2 (b)) | 1 |
| Stop lamp not working inoperative from rear brake control |4.3.1 |a| |ii|| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear brake |1.3.1a| | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Nearside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Steering operation restricted in free movement from lock to lock |2.1.4 |c|| | 1 |
| Rear Stop lamp not working front stop light switch not working (4.3.1 (a) (ii)) | 1 |
| Offside Rear Brake component insecure brake arm locking spint pin missing (1.1.21 (c)) | 1 |
| Rear Stop lamp does not illuminate by the operation of both brake controls rear stop light switch (4.3.2 (a) (iii)) | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Nearside Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Rear Suspension component pin or bush excessively worn Rear Swinging Arm Bushes (5.3.4 (a) (i)) | 1 |
| Nearside Rear Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Stop lamp not working front brake lever switch |4.3.1 |a| |ii|| | 1 |
| Front Brake master cylinder leaking SIGHT GLASS DAMAGED ,NEEDS REPLACING. OWNER HAS PUT TEMPORY REPAIR IN PLACE |1.1.10 |b| |ii|| | 1 |
| Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Motorcycle structure has a fracture which is likely to adversely affect braking or steering swingarm and chain adjuster damaged wich could cause wheel to move out of alignment (6.1.1 (a) (ii)) | 1 |
| Offside Rear Direction indicator likely to become detached |4.4.1 |c| |ii|| | 1 |
| Nearside Front Throttle control functioning such that safe operation of the motorcycle is adversely affected Throttle not returning to closed position (6.2.7 (a) (ii)) | 1 |
| Front Brake lever pivot excessively tight |1.1.1 |a|| | 1 |
| Rear Suspension component pin or bush excessively worn swing arm (5.3.4 (a) (i)) | 1 |
| Rear Chain guard insecure (6.1.7 (i)) | 1 |
| Front Shock absorber has a serious fluid leak FORK SEALS (5.3.2 (b)) | 1 |
| Shock absorber has a serious fluid leak FORK SEALS (5.3.2 (b)) | 1 |
| Nearside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Direction indicator adversely affected by the operation of another lamp nearside dim when offside on (4.4.3 (b)) | 1 |
| Headlamp light source and lamp not compatible h i d (4.1.4 (c)) | 1 |
| Position lamp showing red light to the front (4.2.3 (a) (ii)) | 1 |
| Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Front Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
| Rear Brake rod insecure (1.1.15 (c)) | 1 |
| Front Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
| Rear Brake pedal pivot has excessive free play Brake pedal has excessive travel |1.1.1 |b|| | 1 |
| Steering headbearing has excessive wear or free play Knock from steering headbearings during suspension bump test |2.2.2 |f| |i|| | 1 |
| Front Steering headbearing has excessive wear or free play Judder from head bearings during front brake test |2.2.2 |f| |i|| | 1 |
| Front Headlamp insecure |4.1.1 |c|| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid Fluid leak from front brake reservoir sight glass |3.2.B1e| | 1 |
| Front Brake fluid reservoir leaking hydraulic fluid Slight fluid leak from front brake reservoir cap |3.2.B1e| | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Offside Front Direction indicators not working Front O/S turn signal in/op |1.5.1c| | 1 |
| Offside Rear Direction indicators flashing more than 120 times per minute Rear O/S turn signal flashing more than 120 times per minute |1.5.1c| | 1 |
| Horn not working BOTH HORNS |7.7 |a| |ii|| | 1 |
| Rear Riders seat insecure MOUNTING BOLT BROKEN |6.2.5 |a| |ii|| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Central Front Upper Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Central Rear Upper Stop lamp emits other than a steady red light (4.3.3 (a) (ii)) | 1 |
| Wheel alignment incorrect which adversely affects the handling Rear wheel maladjusted (2.4 (a)) | 1 |
| Rear Brake component insecure Split pin missing from reaction bracket securing bolt (1.1.21 (c)) | 1 |
| Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Stop lamp adversely affected by the operation of another lamp stop lamp only works when rear light is off i.e wired up wrong |4.3.3 |b|| | 1 |
| Stop lamp not working on front lever |4.3.1 |a| |ii|| | 1 |
| Stop lamp not working foot pedal brake |4.3.1 |a| |ii|| | 1 |
| Rear Stop lamp not working not working when rear brake applied (4.3.1 (a) (ii)) | 1 |
| Rear Footrest missing both |6.2.12 |a|| | 1 |
| Offside Rear Brake grabbing severely |1.2.1 |c|| | 1 |
| Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Offside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Rear Brake clevis joint insecure Locking clip missing. (1.1.15 (c)) | 1 |
| Suspension attachment bracket/mounting insecure Swingarm axle adjuster nuts loose (5.3.3 (a) (i)) | 1 |
| Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Front Headlamp incorrect colour (4.1.4 (a)) | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear switch |1.3.1a| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Front Brake master cylinder severely damaged |3.2.B1b| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Rear Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
| Rear Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected |5.2.1 |c| |ii|| | 1 |
| Offside Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Nearside Front Direction indicator lens defective such that the emitted light is adversely affected lens has a hole emitting white light (4.4.1 (b) (ii)) | 1 |
| Offside Front Footrest insecure weld holding footboard has snapped held with banding wire (6.2.12 (a)) | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Exhaust has a major leak of exhaust gases leaking on cylinder head |6.1.2 |a|| | 1 |
| Stop lamp not working rear brake (4.3.1 (a) (ii)) | 1 |
| Rear Brake excessively binding cable |1.2.1 |f|| | 1 |
| Offside Rear Footrest insecure (6.2.12 (a)) | 1 |
| Rear Brake component inadequately mounted rear brake arm retaining clip missing (1.1.21 (c)) | 1 |