| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 51 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 16 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 11 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 11 |
| Rear reflector missing (4.8.2 (a) (ii)) | 10 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 9 |
| Drive chain excessively loose |6.2.1d| | 9 |
| Registration plate issues | 8 |
| Stop lamp not working (4.3.1 (a) (ii)) | 8 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 7 |
| Front Brake excessively binding |1.2.1 |f|| | 7 |
| Rear Brake excessively binding (1.2.1 (f)) | 7 |
| Front Brake excessively binding (1.2.1 (f)) | 7 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 7 |
| Stop lamp remains on when the brakes are released | 7 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
| Steering headbearing has excessive free play |2.2.2| | 6 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 5 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Rear reflector on motorcycle missing |1.4.1| | 5 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 5 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 5 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 5 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 3 |
| Registration plate lamp issues | 3 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 3 |
| Drive chain excessively tight |6.2.1d| | 3 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
| Front Position lamp not working (4.2.1 (a)) | 3 |
| Stop lamp not working |4.3.1 |a| |ii|| | 3 |
| Handlebar mounting insecure (2.2.1 (a) (i)) | 3 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 3 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 3 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 3 |
| Drive chain excessively loose |6.1.7 |c| |i|| | 3 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 3 |
| Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 3 |
| Pillion seat insecure (6.2.6 (a) (ii)) | 2 |
| Riders seat insecure (6.2.5 (a) (ii)) | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Nearside Drive chain excessively loose |6.2.1d| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Offside Rear Direction indicator insecure |1.5.3b| | 2 |
| Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
| Front Position lamp not working |4.2.1 |a|| | 2 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 2 |
| Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 2 |
| Offside Rear Direction indicators not working |1.5.1c| | 2 |
| Headlamp insecure (4.1.1 (c)) | 2 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied (1.1.2 (d)) | 2 |
| Headlamp aim not tested (4.1.2 (b)) | 2 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 2 |
| Brake hose excessively deteriorated | 2 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 2 |
| Headlamp aim not tested |4.1.2 |b|| | 2 |
| Nearside Rear Footrest missing (6.2.12 (a)) | 2 |
| Offside Rear Footrest missing (6.2.12 (a)) | 2 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 2 |
| Drive chain excessively tight |6.1.7 |k| |i|| | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Nearside Front Upper Direction indicators not working |1.5.1c| | 2 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Front Brake hose damaged and likely to fail (1.1.12 (a)) | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Stop lamp does not illuminate immediately a brake applies needs adjustment |1.3.1a| | 1 |
| Throttle operating incorrectly Too much slack in cable (6.2.7 (a) (i)) | 1 |
| Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Suspension arm pin or bush excessively worn play in swing arm (5.3.4 (a) (i)) | 1 |
| Front Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Front Brake fluid contaminated (1.8 (a)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Exhaust excessively deteriorated |7.1.1a| | 1 |
| Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Central Front Headlamp insecure (4.1.1 (c)) | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Nearside Drive chain worn to excess |6.2.1e| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear suspension bearing has excessive free play Swing arm pivot |2.4.A2a|i|| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Side stand |6.2.1h| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| All direction indicators missing |4.4.1 |a| |ii|| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Footrest missing both rear |6.2.12 |a|| | 1 |
| Front Brake fluid significantly below minimum mark |1.1.10 |d| |ii|| | 1 |
| Front Wheel fixing loose |single fixing| |5.2.1 |a| |ii|| | 1 |
| Nearside Footrest insecure (6.2.12 (a)) | 1 |
| Offside Footrest insecure (6.2.12 (a)) | 1 |
| Fuel system component leaking (6.1.3 (b) (i)) | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride chain split link |6.2.1h| | 1 |
| Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
| Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
| Rear Wheel spindle or securing nut|s| so insecure that wheel security or steering control is adversely affected rear wheel |5.2.1 |c| |ii|| | 1 |
| Fuel tank insecure (6.1.3 (a) (i)) | 1 |
| Riders seat insecure |6.2.5 |a| |ii|| | 1 |
| Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 1 |
| Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Front Drive chain sprocket so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies On the rear brake lever |1.3.1a| | 1 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected throttle sticks open (6.2.7 (a) (ii)) | 1 |
| Brake fluid reservoir fluid not visible front brake fluid level not visible due to contaminated/damaged sight glass (1.1.10 (d) (iii)) | 1 |
| Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Engine mounting/bracket missing (6.1.8 (a) (ii)) | 1 |
| Position lamp not working (4.2.1 (a)) | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies front brake control |1.3.1a| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected sticking (6.2.7 (a) (ii)) | 1 |
| Wheel fixing missing (multiple fixings) chain adjuster broken (5.2.1 (a) (i)) | 1 |
| Rear Brake grabbing severely link bar bushes worn (1.2.1 (c)) | 1 |
| Brake performance not tested (1.2.1 (g)) | 1 |
| Nearside Rear Lower Drive chain sprocket excessively loose |6.1.7 |c| |i|| | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Position lamp not working |4.2.1 |a|| | 1 |
| Rear Stop lamp not working rear brake stop lamp inoperative (4.3.1 (a) (ii)) | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling wheel excessivly misaligned (2.4 (a)) | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
| Nearside Front Brake excessively binding (1.2.1 (f)) | 1 |
| Offside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
| Offside Front Direction indicator incorrect colour red (4.4.3 (a)) | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear Drive chain worn to excess |6.2.1e| | 1 |
| Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Brake performance not tested |3.3| | 1 |
| Nearside Rear Footrest missing nearside pillion peg seized in up position (6.2.12 (a)) | 1 |
| Nearside Suspension arm attachment bracket/mounting damaged and seriously weakened drive chain adjuster broken/missing, wheel likely to move forward or back on the move (5.3.3 (b) (i)) | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear suspension component excessively bent swing arm |2.4.A.1a| | 1 |
| Rear suspension component misaligned swing arm |2.4.A.1a| | 1 |
| Brake master cylinder leaking at switch |1.1.10 |b| |ii|| | 1 |
| Rear Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Stop lamp does not illuminate immediately a brake applies stop light dose not illuminate when applying front brake |1.3.1a| | 1 |
| Rear Brake pivot has restricted free movement (1.1.15 (e)) | 1 |
| Rear Brake linkage has restricted free movement (1.1.15 (e)) | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
| Stop lamp not working on front brake lever |4.3.1 |a| |ii|| | 1 |
| Front Brake fluid contaminated |1.8 |a|| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| All position lamps not working (4.2.1 (a)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen LED bulb fitted - requires Halogen with beam image (4.1.2 (a)) | 1 |
| Offside Front Stop lamp not working Brake lever control not operation stop lamp (4.3.1 (a) (ii)) | 1 |
| Offside Front Upper Brake lever has restricted free movement needs grease |1.1.15 |e|| | 1 |
| Rear Suspension arm pin or bush likely to become detached (5.3.4 (a) (ii)) | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp not working front lever (4.3.1 (a) (ii)) | 1 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Offside Stop lamp switch with a delay in operation foot control (4.3.2 (a) (ii)) | 1 |
| Headlamp insecure |4.1.1 |c|| | 1 |
| Rear reflector defective or damaged by more than 50% of the reflecting surface (4.8.1 (a) (ii)) | 1 |
| Nearside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
| Front Brake lever is so short that the brake cannot be readily applied |1.1.2 |d|| | 1 |
| Front Brake lever insecure PIVOT PIN HAS NO LOCKING DEVICE (1.1.2 (e) (i)) | 1 |
| Rear Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Brake grabbing severely (1.2.1 (c)) | 1 |
| Rear suspension bearing has excessive free play swing arm pivot |2.4.A2a|i|| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Rear Direction indicator missing |4.4.1 |a| |ii|| | 1 |
| Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Rear Brake cable insecure | 1 |
| Stop lamp not working O/S/R Lever |4.3.1 |a| |ii|| | 1 |
| Indicator switch inoperative Flashing both indicators together (4.4.2 (a) (ii)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Front Headlamp aim not tested (4.1.2 (b)) | 1 |
| Offside Rear Motorcycle structure joining/attachment plate or fastening insecure luggage rack fixing through mudgaurd (6.1.1 (b) (i)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Rear Motorcycle structure excessively damaged |6.1.1a| | 1 |
| Rear Motorcycle structure excessively distorted |6.1.1a| | 1 |
| Rear suspension component excessively bent |2.4.A.1a| | 1 |
| Nearside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Front Headlamp insecure (4.1.1 (c)) | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear brake reaction bar |6.2.1h| | 1 |
| Rear Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
| Brake linkage has restricted free movement |1.1.15 |e|| | 1 |
| Direction indicator obviously incorrectly positioned both front only 100 mm distance apart |4.4.3 |a|| | 1 |
| Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Steering linkage locking device ineffective |2.1.3 |d|| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Brake lever insecure (1.1.2 (e) (i)) | 1 |
| Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Rear Stop lamp not working with foot brake (4.3.1 (a) (ii)) | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Position lamp not working Position lights only come on with dip beam |4.2.1 |a|| | 1 |
| Front Brake lagging in operation No reserve travel |1.2.1 |d|| | 1 |
| Stop lamp does not illuminate immediately a brake applies front lever |1.3.1a| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Headlamp aim projected beam image obviously incorrect no aim (4.1.2 (c)) | 1 |
| Front Wheel alignment incorrect which adversely affects the handling out of line poss due to damage (2.4 (a)) | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride Sidestand bolt loose. |6.2.1h| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen no beam pattern (4.1.2 (a)) | 1 |
| Offside Front Throttle control functioning such that safe operation of the motorcycle is adversely affected Throttle operates when steering turned. (6.2.7 (a) (ii)) | 1 |
| Nearside Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Offside Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Front Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
| Drive chain so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Direction indicator not working |1.5.1c| | 1 |
| Direction indicator insecure |1.5.3b| | 1 |
| Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Handlebar mounting so insecure that steering is adversely affected (2.2.1 (a) (ii)) | 1 |
| Clutch lever shortened so it cannot be readily operated clutch lever broken (sharp edge) (6.2.7 (b)) | 1 |
| Rear Position lamp likely to become detached (4.2.1 (c) (ii)) | 1 |
| Rear Brake pedal so insecure that the brake cannot be readily applied (1.1.2 (e) (ii)) | 1 |
| Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Nearside Front Clutch lever shortened so it cannot be readily operated |6.2.7 |b|| | 1 |
| Rear Stop lamp not working When using foot brake. |4.3.1 |a| |ii|| | 1 |
| Nearside Rear Lower Suspension component mounting modified so the suspension is likely to fail other components swing arm bush worn. |5.3.3 |c| |ii|| | 1 |
| Rear Brake grabbing severely |1.2.1 |c|| | 1 |
| Offside Rear Lower Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Front Direction indicator not working front right |4.4.1 |a| |ii|| | 1 |
| Rear Direction indicator not working rear right |4.4.1 |a| |ii|| | 1 |
| Front Brake indicates excessive fluctuation of brake effort disc |1.2.1 |e|| | 1 |
| Nearside Motorcycle structure joining/attachment plate or fastening insecure side panel |6.1.1 |b| |i|| | 1 |
| Front Motorcycle structure has a fracture which is likely to adversely affect braking or steering speedometer clocks |6.1.1 |a| |ii|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension exhaust fouling on rear shock bolt when sus compressed |2.4.A.3a| | 1 |
| Clutch lever shortened so it cannot be readily operated (6.2.7 (b)) | 1 |
| Handlebar excessively deformed (2.2.1 (c) (i)) | 1 |
| Front Brake lagging in operation (1.2.1 (d)) | 1 |
| Rear Drive chain sprocket so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
| Stop lamp remains on when the brake is released Front lever |1.3.1e| | 1 |
| Offside Front shock absorber seal failed and leaking oil [Right hand side] |2.3.3| | 1 |
| Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
| Rear Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Stop lamp not working Off foot brake (4.3.1 (a) (ii)) | 1 |
| Offside Front Brake pedal is positioned so that the brake cannot be readily applied Foot brake to much travel (1.1.2 (d)) | 1 |
| Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Nearside Front Upper Clutch lever bent so it cannot be readily operated Lever snapped leaving a sharp edge and bent. |6.2.7 |b|| | 1 |
| Nearside Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Position lamp showing red light to the front |4.2.3 |a| |ii|| | 1 |
| Vehicle identification number incomplete |0.2 |b|| | 1 |
| Front Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
| Rear Drive chain sprocket so worn it is likely to fail |6.1.7 |c| |ii|| | 1 |
| Rear Drive chain worn to excess |6.1.7 |c| |i|| | 1 |
| Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
| Front Direction indicator not working ns |4.4.1 |a| |ii|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Stop lamp not working not working when rear brake applied. |4.3.1 |a| |ii|| | 1 |
| Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Central Front Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
| Central Front Headlamp aim not tested |1.6| | 1 |
| Central Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Central Front Upper Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies front brake light repaired at station. |1.3.1a| | 1 |
| Nearside Rear Lower Drive chain excessively tight |6.2.1d| | 1 |
| Offside Rear Lower Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Rear Stop lamp does not emit a steady light switch |1.3.1b| | 1 |
| Front Brake pipe union leaking fluid |3.2.B4| | 1 |
| Fuel cap ineffective UNABLE TO OPEN FUEL CAP |6.1.3 |b| |i|| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Rear Brake back plate|s| insecure split pin missing |3.2.A1j| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Offside Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Central Rear Stop lamp does not illuminate immediately a brake applies control 1 / front lever does not illuminate brake light |1.3.1a| | 1 |
| Central Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Headlamp light source and lamp not compatible NO PATTERN ON DIP, BULB FITTED UPSIDE DOWN (4.1.4 (c)) | 1 |
| Front Steering headbearing excessively stiff or notchy STIFF AND NOTCHED (2.2.2 (f) (i)) | 1 |
| Rear Brake rod insecure LOCKING DEVICE MISSING (SPLIT PIN FROM REAR BRAKE TORQUE ARM) (1.1.15 (c)) | 1 |
| Offside Front Upper Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Rear Brake component insecure |1.1.21 |c|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
| Rear Suspension arm pin or bush excessively worn swingarm bushes |5.3.4 |a| |i|| | 1 |
| Stop lamp not working on front and rear controls (4.3.1 (a) (ii)) | 1 |
| Front Brake hose stretched by suspension movement |3.2.B3b| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
| Front Wheel alignment incorrect which adversely affects the steering (2.4 (a)) | 1 |
| Rear Brake lever excessively worn (1.1.15 (b)) | 1 |
| Rear Brake lever is positioned so that the brake cannot be readily applied (1.1.2 (d)) | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |