| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 13 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
| Drive chain excessively loose |6.2.1d| | 8 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
| Steering headbearing has excessive free play |2.2.2| | 5 |
| Rear reflector missing (4.8.2 (a) (ii)) | 5 |
| Drive chain worn to excess |6.2.1e| | 5 |
| Registration plate issues | 5 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 4 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
| Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
| Headlamp insecure |1.2.3b| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Wheel alignment incorrect which adversely affects the handling (2.4 (a)) | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
| Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Drive chain worn to excess |6.1.7 |c| |i|| | 2 |
| Rear Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 2 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Registration plate lamp issues | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Brake locking device missing |3.2.A1e| | 1 |
| Offside Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Stop lamp not working when rear brake applied (4.3.1 (a) (ii)) | 1 |
| Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Offside Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii|| | 1 |
| Stop lamp does not illuminate immediately a brake applies Front brake
|1.3.1a| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Exhaust system insecure |6.1.2 |a|| | 1 |
| Front Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
| Front Headlamp insecure |4.1.1 |c|| | 1 |
| Front Headlamp light intensity severely reduced |4.1.4 |a|| | 1 |
| Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
| Offside Footrest insecure |6.2.1a| | 1 |
| Offside Rear Brake cable damaged (1.1.15 (a)) | 1 |
| Nearside Rear Drive chain so loose it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Nearside Front Brake caliper excessively corroded and likely to crack (1.1.16 (d) (ii)) | 1 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Front Stop lamp not working Switch missing as fitted from new (4.3.1 (a) (ii)) | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Nearside Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
| Rear Suspension arm pin or bush excessively worn loose bolt (5.3.4 (a) (i)) | 1 |
| Front Brake lagging in operation |1.2.1 |d|| | 1 |
| Front Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Suspension arm attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
| Rear Drive chain sprocket so loose it is likely to fail Rear sprocket has one nut missing and the other three are loose. (6.1.7 (c) (ii)) | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Front Brake fluid contaminated (1.8 (a)) | 1 |
| Nearside Rear Drive chain sprocket excessively loose sprocket nuts loose (6.1.7 (c) (i)) | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Rear Footrest missing BOTH (6.2.12 (a)) | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure REAR ENGINE MOUNT NUT MISSING (6.1.1 (b) (i)) | 1 |
| Offside Rear Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced Pannier Bracket (6.1.1 (b) (ii)) | 1 |
| Nearside Rear Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced Rear Fender Strut (6.1.1 (b) (ii)) | 1 |
| Offside Front Footrest insecure (6.2.12 (a)) | 1 |
| Nearside Rear Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
| Rear Direction indicator missing Indicator lens Missing (4.4.1 (a) (ii)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Offside Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Nearside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
| Offside Front Shock absorber has a serious fluid leak fork seal (5.3.2 (b)) | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Suspension component pin or bush excessively worn swindgarm |5.3.4 |a| |i|| | 1 |
| Front Drive chain sprocket worn to excess |6.1.7 |c| |i|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Exhaust silencer insecure |8.1.1 |b| |i|| | 1 |
| Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Front Brake disc contaminated |1.1.14 |b|| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Central Front Stop lamp does not illuminate by the operation of both brake controls brake light does not illuminate when front brake applied (4.3.2 (a) (iii)) | 1 |
| Offside Front Lower Footrest insecure secured with zip ties (6.2.12 (a)) | 1 |
| Central Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Central Rear Steering linkage has excessive free play swing arm bearings worn to exess |2.2.2| | 1 |
| All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Central Front Brake excessively binding |1.2.1 |f|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride rear sprocket bolts loose |6.2.1h| | 1 |
| Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
| Horn not working |1.7.3a| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Horn not working (7.7 (a)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Offside Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride sprocket nuts loose |6.2.1h| | 1 |
| Front Headlamp not working on dipped beam Fitted bulb. (4.1.1 (a) (ii)) | 1 |
| Rear Drive chain horseshoe locking device likely to become detached Fitted new one.was missing. (6.1.7 (j) (ii)) | 1 |
| Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Throttle operating incorrectly Sticking & not returning (6.2.7 (a) (i)) | 1 |
| All direction indicators light intensity significantly reduced |4.4.3 |a|| | 1 |
| Drive chain horseshoe locking device incorrectly fitted |6.1.7 |j| |i|| | 1 |
| Front Brake caliper|s| insecure |3.2.A1j| | 1 |
| Front shock absorber seal failed and leaking oil both fork seals |2.3.3| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Stop lamp does not illuminate immediately a brake applies from front brake |1.3.1a| | 1 |