| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 11 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Drive chain excessively loose |6.2.1d| | 5 |
| Steering headbearing has excessive free play |2.2.2| | 4 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 4 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
| All direction indicators not working (4.4.1 (a) (ii)) | 2 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Offside Front Direction indicator not working |1.5.1c| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
| Riders seat insecure (6.2.5 (a) (ii)) | 2 |
| Nearside Indicator switch defective |1.5.4| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 2 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Brake cable excessively corroded |3.2.A1b| | 1 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Offside Direction indicator not working |1.5.1c| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Front Brake hose leaking (1.1.12 (c)) | 1 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Horn not working |1.7.3a| | 1 |
| Rear Footrest missing (6.2.12 (a)) | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Brake component insecure REAR BRAKE REACTION ROD |1.1.21 |c|| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
| Offside Front Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Front Brake master cylinder leaking Cracked Sight Glass |1.1.10 |b| |ii|| | 1 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| All position lamps not working (4.2.1 (a)) | 1 |
| Rear reflector missing covered by l plate (4.8.2 (a) (ii)) | 1 |
| Stop lamp does not illuminate immediately a brake applies not working with foot brake lever |1.3.1a| | 1 |
| Brake locking device missing TORQUE ROD |3.2.A1e| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Rear Brake reaction bracket securing bolt|s| loose hub end |3.2.A1j| | 1 |
| Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake back plate|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Front position lamp does not illuminate immediately when switched on high beam not working |1.1.3a| | 1 |
| Drive chain excessively tight |6.2.1d| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
| Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Drive chain worn to excess |6.2.1e| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Rear Brake pedal insecure (1.1.2 (e) (i)) | 1 |
| Front Suspension arm attachment bracket/mounting insecure (5.3.3 (a) (i)) | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front Brake performance not tested |1.2.1 |g|| | 1 |
| Rear Direction indicator obviously incorrectly positioned less than 180mm apart |4.4.3 |a|| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| Stop lamp not working rear switch defective |4.3.1 |a| |ii|| | 1 |
| Nearside Rear Footrest missing |6.2.12 |a|| | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Motorcycle structure joining/attachment plate or fastening insecure Clutch lever bracket (6.1.1 (b) (i)) | 1 |
| Offside Indicator switch inoperative |4.4.2 |a| |ii|| | 1 |
| Front Brake grabbing severely |1.2.1 |c|| | 1 |
| Offside Rear Lower Direction indicators not working |1.5.1c| | 1 |
| Front Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b|| | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Nearside Rear Footrest insecure (6.2.12 (a)) | 1 |
| Nearside Rear Chain guard insecure (6.1.7 (i)) | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Indicator switch defective |1.5.4| | 1 |
| Handlebar so insecure it is likely to become detached right hand handlebar riser clamp was loose under top yoke (2.2.1 (b) (ii)) | 1 |
| Registration plate lamp issues | 1 |
| Dipswitch does not operate immediately when selected on main beam (4.1.3 (b)) | 1 |
| Front Position lamp not working sidelight bulb is inoperative (4.2.1 (a)) | 1 |
| Nearside Headlamp switch faulty |1.2.4| | 1 |
| Front Position lamp not working side lamp |4.2.1 |a|| | 1 |
| Front Position lamp not working |4.2.1 |a|| | 1 |
| Front Position lamp not working high beam |4.2.1 |a|| | 1 |
| Rear Chain guard insecure |6.1.7 |i|| | 1 |
| Rear Brake pedal so insecure that the brake cannot be readily applied |1.1.2 |e| |ii|| | 1 |
| Rear Brake reaction bracket excessively corroded s/pin missing |1.1.15 |b|| | 1 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |