Most common failures | No# failures |
---|
Headlamp aim out of alignment | 78 |
Registration plate lamp issues | 27 |
Horn not working |1.7.3a| | 16 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 13 |
Drive chain excessively loose |6.2.1d| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Horn not working (7.7 (a) (ii)) | 10 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 9 |
Rear reflector on motorcycle missing |1.4.1| | 8 |
Horn not working (7.7 (a)) | 7 |
Registration plate issues | 7 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Drive chain excessively loose (6.1.7 (c) (i)) | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 6 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 6 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 5 |
Drive chain worn to excess |6.2.1e| | 5 |
Horn not working |7.7 |a| |ii|| | 5 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Nearside Front Footrest insecure |6.2.1a| | 4 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 3 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Rear Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 2 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Front Drive chain sprocket worn to excess |6.2.1e| | 2 |
Front Front position lamp does not illuminate immediately when switched on dipped beam |1.1.3a| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 2 |
Nearside Front Footrest insecure (6.2.12 (a)) | 2 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Horn control not functioning. |1.7.2b| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Offside Rear Footrest insecure |6.2.1a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Offside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 2 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 2 |