MOT History from tests of petrol HUMBER S SNIPEs year 1967

Review the list of common HUMBER S SNIPE failures below or to perform a specific mot history check on your HUMBER then use our popular KnowYourCar service

mot history

Pass percent:82.09%

(The average a petrol HUMBER S SNIPE year 1967 passes without issue)

Based on:67 MOT Tests

Most common failures	No# failures
Rear brake binding	3
Registration plate lamp issues	3
Brake pipe excessively corroded	2
Stop lamp remains on when the brakes are released	2
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush \|2.4.G.2\|	1
Rear Mechanical brake component has restricted free movement	1
Front Exhaust mounting missing \|7.1.1b\|	1
Rear Exhaust system not adequately supported \|7.1.1\|	1
Front Horn not working \|1.6.2a\|	1
Brakes imbalanced across an axle	1
Offside Inner Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.2.C.1c\|	1
Nearside Outer Front Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside Inner Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Inner Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Power steering ram\|s\| leaking from a failed seal \|2.3.3b\|	1
Nearside Front Upper Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Offside Front Upper Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Offside Front Steering component mounting prescribed area is inadequately repaired \|2.2.C.1h\|	1
Headlamp aim out of alignment	1
Power steering inoperative \|2.3.3a\|	1
Horn not loud enough to be heard by another road user \|1.6.2b\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Exhaust system not adequately supported \|7.1.1\|	1
Rear Stop lamp not working \|1.2.1b\|	1
Offside Front Headlamp not working on main beam \|1.7.5a\|	1
Fuel system component leaking \|7.2.3\|	1
Exhaust emits dense blue smoke at idle \|7.3.A.2b\|	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Rear brake binding	3
Registration plate lamp issues	3
Brake pipe excessively corroded	2
Stop lamp remains on when the brakes are released	2
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside Front Anti-roll bar linkage has excessive play in a pin/bush \|2.4.G.2\|	1
Rear Mechanical brake component has restricted free movement	1
Front Exhaust mounting missing \|7.1.1b\|	1
Rear Exhaust system not adequately supported \|7.1.1\|	1
Front Horn not working \|1.6.2a\|	1
Brakes imbalanced across an axle	1
Offside Inner Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.2.C.1c\|	1
Nearside Outer Front Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside Inner Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Inner Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Power steering ram\|s\| leaking from a failed seal \|2.3.3b\|	1
Nearside Front Upper Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Offside Front Upper Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Offside Front Steering component mounting prescribed area is inadequately repaired \|2.2.C.1h\|	1
Headlamp aim out of alignment	1
Power steering inoperative \|2.3.3a\|	1
Horn not loud enough to be heard by another road user \|1.6.2b\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Exhaust system not adequately supported \|7.1.1\|	1
Rear Stop lamp not working \|1.2.1b\|	1
Offside Front Headlamp not working on main beam \|1.7.5a\|	1
Fuel system component leaking \|7.2.3\|	1
Exhaust emits dense blue smoke at idle \|7.3.A.2b\|	1

MOT History from tests of petrol HUMBER S SNIPEs year 1967

Find us on Facebook