Most common failures | No# failures |
---|
Headlamp aim out of alignment | 41 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 23 |
Registration plate issues | 13 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Registration plate lamp issues | 11 |
Steering headbearing has excessive free play |2.2.2| | 9 |
Stop lamp remains on when the brakes are released | 7 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 4 |
Headlamp insecure |1.2.3b| | 4 |
Stop lamp not working |4.3.1 |a| |ii|| | 4 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 4 |
Front Brake excessively binding |1.2.1 |f|| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 4 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 4 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 4 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 4 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Headlamp aim not tested |1.6| | 3 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 3 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Rear Suspension arm pin or bush excessively worn |5.3.4 |a| |i|| | 2 |
Engine mounting/bracket bracket damaged or deteriorated resulting in excessive movement |6.1.8 |a| |i|| | 2 |
Rear reflector on motorcycle insecure |1.4.2c| | 2 |
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment |1.1.15 |f|| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Stop lamp does not emit a steady light |1.3.1b| | 2 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Position lamp not working |4.2.1 |a|| | 2 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Indicator tell tale not functioning |1.5.2| | 2 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
All direction indicators not working |4.4.1 |a| |ii|| | 2 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Headlamp insecure (4.1.1 (c)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Nearside Front Position lamp not working (4.2.1 (a)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Exhaust silencer insecure bolt missing |8.1.1 |b| |i|| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Rear Footrest missing |6.2.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Nearside Front Position lamp adversely affected by the operation of another lamp |4.2.3 |b|| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Nearside Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front suspension assembly component excessively bent |2.3.1| | 1 |
Nearside Front Front position lamp missing |1.1.1a| | 1 |
Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Handlebar deformed to the extent that steering is affected |2.2.1 |c| |ii|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Forks excessively deformed |2.2.2 |d| |i|| | 1 |
Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 1 |
Front Brake cylinder damaged and braking performance affected |1.1.16 |a| |ii|| | 1 |
Front Brake pivot has restricted free movement |1.1.15 |e|| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Upper Shock absorber has an excessively worn bush |5.3.2 |c|| | 1 |
Front Shock absorber has negligible damping effect both |5.3.2 |b|| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Nearside Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies front switch |1.3.1a| | 1 |
Central Front Upper Headlamp aim not tested |4.1.2 |b|| | 1 |
Nearside Front Lower Shock absorber has a serious fluid leak BOTH SIDES FRONT |5.3.2 |b|| | 1 |
Brake hose damaged | 1 |
Central Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Central Front Lower Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 1 |
Rear Wheel fixing loose |single fixing| |5.2.1 |a| |ii|| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake caliper|s| insecure |3.2.A1j| | 1 |
Offside Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Front Headlamp insecure |4.1.1 |c|| | 1 |
Nearside Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Horn not working |1.7.3a| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Steering movement excessively stiff with the weight on the lower bearing rubbing on r/h lock |2.2.1a| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Centre Rear Lower Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Riders seat insecure |6.2.1a| | 1 |
Rear Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Front Brake grabbing severely |1.2.1 |c|| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Stop lamp damaged and function impaired |1.3.3a| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Brake effort inadequate at a wheel adjusted brake |1.2.1 |a| |i|| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Stop lamp with a multiple light source more than 1/2 not functioning (4.3.1 (a) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak all over wheel (5.3.2 (b)) | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Front Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Front Horn not working (7.7 (a) (ii)) | 1 |
Brake fluid significantly below minimum mark (1.1.10 (d) (ii)) | 1 |
Nearside Footrest insecure (6.2.12 (a)) | 1 |
Stop lamp not working Front brake switch n/w (4.3.1 (a) (ii)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Shock absorber has a serious fluid leak L/H FORK SEAL (5.3.2 (b)) | 1 |
Offside Front Shock absorber has a serious fluid leak fork seal leaking (5.3.2 (b)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Nearside Front Position lamp not working position lamp replaced (4.2.1 (a)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Headlamp not working on main beam blue lamp (4.1.1 (a) (ii)) | 1 |
Stop lamp not working Rear lever switch (4.3.1 (a) (ii)) | 1 |
Brake lever insecure Rear (1.1.2 (e) (i)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Brake performance not tested (1.2.1 (g)) | 1 |
Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Brake effort inadequate at a wheel rear brake couldnt stop the wheel (1.2.1 (a) (i)) | 1 |
Stop lamp not working From front brake control (4.3.1 (a) (ii)) | 1 |
Front Stop lamp not working brake light switch (4.3.1 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak Both front fork seals leaking (5.3.2 (b)) | 1 |
Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls switchs faulty (4.3.2 (a) (iii)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear Stop lamp not working both levers (4.3.1 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
Nearside Front Brake cable insecure (1.1.15 (c)) | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Position lamp adversely affected by the operation of another lamp LED bulbs fitted which are flashing rather than continuous (4.2.3 (b)) | 1 |
Front Headlamp insecure (4.1.1 (c)) | 1 |
Nearside Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Offside Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Position lamp not working not working (4.2.1 (a)) | 1 |
Horn not working (7.7 (a)) | 1 |
Brake lever pivot has excessive free play LEVER ASSEMBLY LOOSE ONHANDLE BARS (1.1.1 (b)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |