MOT History from tests of petrol HONDA CBR1000Fs year 1988

Review the list of common HONDA CBR1000F failures below or to perform a specific mot history check on your HONDA then use our popular KnowYourCar service

mot history

Pass percent:76.19%

(The average a petrol HONDA CBR1000F year 1988 passes without issue)

Based on:2,176 MOT Tests

Most common failures	No# failures
Headlamp aim out of alignment	56
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	38
Front Roller brake test indicates a binding brake \|3.3.A1a\|	38
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	37
Registration plate issues	27
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	26
Rear reflector on motorcycle missing \|1.4.1\|	26
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	26
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	25
Rear Brake disc\|s\| cracked \|3.2.A1g\|	19
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	19
Offside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	18
Exhaust is leaking and excessively noisey \|7.1.1b\|	16
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	16
Rear wheel bearings have excessive free play \|2.4.A.2c\|	15
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	15
Front shock absorber seal failed and leaking oil \|2.3.3\|	14
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	13
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	12
Throttle operating incorrectly \|6.2.1f\|	12
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	11
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	11
Front Floor brake test indicates a binding brake \|3.3.C2c\|	11
Rear Rear reflector on motorcycle missing \|1.4.1\|	10
Drive chain excessively loose \|6.2.1d\|	10
Drive chain excessively tight \|6.2.1d\|	9
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	9
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	8
Steering headbearing has excessive free play \|2.2.2\|	8
Front wheel bearings have excessive free play \|2.3.5b\|	7
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	7
Offside Front Brake disc\|s\| cracked \|3.2.A1g\|	7
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	7
Nearside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	6
Exhaust excessively deteriorated \|7.1.1a\|	6
Horn not working \|1.7.3a\|	6
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	6
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	6
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	6
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	6
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	5
Front wheel bearings are excessively rough \|2.3.5b\|	5
Offside Front Brake disc contaminated (1.1.14 (b))	5
Front Position lamp not working (4.2.1 (a))	5
Rear Brake excessively binding (1.2.1 (f))	4
Nearside Rear Direction indicators not working \|1.5.1c\|	4
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	4
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	4
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	4
Rear Stop lamp not working (4.3.1 (a) (ii))	4
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	4
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	4
Nearside Front Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Nearside Front Direction indicator not working \|1.5.1c\|	4
Horn not working (7.7 (a) (ii))	4
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	4
Front Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	4
Front An item not tested \|Manual\|	4
Drive chain worn to excess \|6.2.1e\|	4
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	4
Front Brake excessively binding \|1.2.1 \|f\|\|	3
Fuel system component insecure \|7.2.1b\|	3
Handlebar handgrip not secure to handlebars. \|2.1.1c\|	3
Rear reflector missing (4.8.2 (a) (ii))	3
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	3
Nearside Front Brake disc\|s\| cracked \|3.2.A1g\|	3
Riders seat insecure \|6.2.1a\|	3
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	3
Rear Drive chain worn to excess \|6.2.1e\|	3
Rear Drive chain excessively loose \|6.2.1d\|	3
Front Brake excessively binding (1.2.1 (f))	3
Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	3
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Front Brake disc\|s\| cracked \|3.2.A1g\|	3
Front Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	3
Front Front wheel bearings have excessive free play \|2.3.5b\|	3
Brake hose excessively deteriorated	3
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	3
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	3
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	2
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	2
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Rear Brake component is excessively corroded \|3.1.5\|	2
Front suspension has inadequate damping effect. \|2.3.6c\|	2
Stop lamp not working (4.3.1 (a) (ii))	2
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	2
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Offside Rear Direction indicator not working \|1.5.1c\|	2
Offside Rear Brake disc\|s\| cracked \|3.2.A1g\|	2
Upper Rear mono-shock pivot excessively worn \|2.4.B.4\|	2
Rear Brake reaction bracket insecure \|3.2.A1j\|	2
Front Throttle operating incorrectly \|6.2.1f\|	2
Offside Front Footrest insecure \|6.2.1a\|	2
Stop lamp affected by the operation of another lamp \|1.3.2\|	2
An item not tested \|Manual\|	2
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Steering movement excessively rough with the weight on the lower bearing \|2.2.1a\|	2
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	2
Headlamp switch faulty \|1.2.4\|	2
Brake pedal cannot be released smoothly \|3.1.3d\|	2
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Nearside Front Brake caliper\|s\| insecure \|3.2.A1j\|	2
Rear Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	2
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	2
Front Hydraulic brake control feels spongy \|3.1.4a\|	2
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	2
Front position lamp incorrect colour \|1.1.2a\|	2
Offside Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Rear Brake locking device missing \|3.2.A1e\|	2
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls \|2.1.2b\|	2
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	2
Centre Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Nearside Front Brake cylinder severely corroded \|3.2.B1b\|	2
Offside Front Brake cylinder severely corroded \|3.2.B1b\|	2
Front Brake pipe likely to be fouled or trapped by moving parts \|3.2.B2c\|	2
Handlebar mounting clamp loose \|2.1.1a\|	2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Headlamp aim out of alignment	56
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	38
Front Roller brake test indicates a binding brake \|3.3.A1a\|	38
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	37
Registration plate issues	27
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	26
Rear reflector on motorcycle missing \|1.4.1\|	26
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	26
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	25
Rear Brake disc\|s\| cracked \|3.2.A1g\|	19
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	19
Offside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	18
Exhaust is leaking and excessively noisey \|7.1.1b\|	16
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	16
Rear wheel bearings have excessive free play \|2.4.A.2c\|	15
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	15
Front shock absorber seal failed and leaking oil \|2.3.3\|	14
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	13
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	12
Throttle operating incorrectly \|6.2.1f\|	12
Rear Floor brake test indicates a binding brake \|3.3.C2c\|	11
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	11
Front Floor brake test indicates a binding brake \|3.3.C2c\|	11
Rear Rear reflector on motorcycle missing \|1.4.1\|	10
Drive chain excessively loose \|6.2.1d\|	10
Drive chain excessively tight \|6.2.1d\|	9
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	9
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	8
Steering headbearing has excessive free play \|2.2.2\|	8
Front wheel bearings have excessive free play \|2.3.5b\|	7
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	7
Offside Front Brake disc\|s\| cracked \|3.2.A1g\|	7
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	7
Nearside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	6
Exhaust excessively deteriorated \|7.1.1a\|	6
Horn not working \|1.7.3a\|	6
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	6
Rear Rear wheel bearings have excessive free play \|2.4.A.2c\|	6
Front Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	6
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	6
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	5
Front wheel bearings are excessively rough \|2.3.5b\|	5
Offside Front Brake disc contaminated (1.1.14 (b))	5
Front Position lamp not working (4.2.1 (a))	5
Rear Brake excessively binding (1.2.1 (f))	4
Nearside Rear Direction indicators not working \|1.5.1c\|	4
Wheel alignment incorrect which adversely affects the handling \|2.5.1\|	4
Rear Floor brake test indicates a sticking brake \|3.3.C2c\|	4
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	4
Rear Stop lamp not working (4.3.1 (a) (ii))	4
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	4
Rear Roller brake test indicates a sticking brake \|3.3.A1a\|	4
Nearside Front Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Nearside Front Direction indicator not working \|1.5.1c\|	4
Horn not working (7.7 (a) (ii))	4
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	4
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	4
Front Brake component has restricted free movement and operation is likely to be impeded \|3.2.A1h\|	4
Front An item not tested \|Manual\|	4
Drive chain worn to excess \|6.2.1e\|	4
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	4
Front Brake excessively binding \|1.2.1 \|f\|\|	3
Fuel system component insecure \|7.2.1b\|	3
Handlebar handgrip not secure to handlebars. \|2.1.1c\|	3
Rear reflector missing (4.8.2 (a) (ii))	3
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort \|3.3.A1c\|	3
Nearside Front Brake disc\|s\| cracked \|3.2.A1g\|	3
Riders seat insecure \|6.2.1a\|	3
Front Brake disc\|s\| is excessively distorted \|3.2.A1m\|	3
Rear Drive chain worn to excess \|6.2.1e\|	3
Rear Drive chain excessively loose \|6.2.1d\|	3
Front Brake excessively binding (1.2.1 (f))	3
Rear Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	3
Front Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	3
Front Brake disc\|s\| cracked \|3.2.A1g\|	3
Front Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	3
Front Front wheel bearings have excessive free play \|2.3.5b\|	3
Brake hose excessively deteriorated	3
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	3
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	3
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	2
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	2
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Rear Brake component is excessively corroded \|3.1.5\|	2
Front suspension has inadequate damping effect. \|2.3.6c\|	2
Stop lamp not working (4.3.1 (a) (ii))	2
Steering movement excessively stiff with the wheel raised \|2.2.1b\|	2
Locking device\|s\| not correctly fitted which may make the motor bicycle dangerous to ride \|6.2.1h\|	2
Offside Rear Direction indicator not working \|1.5.1c\|	2
Offside Rear Brake disc\|s\| cracked \|3.2.A1g\|	2
Upper Rear mono-shock pivot excessively worn \|2.4.B.4\|	2
Rear Brake reaction bracket insecure \|3.2.A1j\|	2
Front Throttle operating incorrectly \|6.2.1f\|	2
Offside Front Footrest insecure \|6.2.1a\|	2
Stop lamp affected by the operation of another lamp \|1.3.2\|	2
An item not tested \|Manual\|	2
Front Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	2
Steering movement excessively rough with the weight on the lower bearing \|2.2.1a\|	2
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	2
Headlamp switch faulty \|1.2.4\|	2
Brake pedal cannot be released smoothly \|3.1.3d\|	2
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	2
Nearside Front Brake caliper\|s\| insecure \|3.2.A1j\|	2
Rear Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	2
Front Brake fluid reservoir fluid level dangerously low \|3.2.B1d\|	2
Front Hydraulic brake control feels spongy \|3.1.4a\|	2
Rear Brake pedal has inadequate reserve travel \|3.1.3b\|	2
Front position lamp incorrect colour \|1.1.2a\|	2
Offside Rear Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Rear Brake locking device missing \|3.2.A1e\|	2
Rear Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	2
Nearside Steering control has Insufficient clearance at full lock affecting the riders operation of the controls \|2.1.2b\|	2
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	2
Centre Exhaust is leaking and excessively noisey \|7.1.1b\|	2
Nearside Front Brake cylinder severely corroded \|3.2.B1b\|	2
Offside Front Brake cylinder severely corroded \|3.2.B1b\|	2
Front Brake pipe likely to be fouled or trapped by moving parts \|3.2.B2c\|	2
Handlebar mounting clamp loose \|2.1.1a\|	2

MOT History from tests of petrol HONDA CBR1000Fs year 1988

Find us on Facebook