Most common failures | No# failures |
---|
Headlamp aim out of alignment | 8 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 7 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 7 |
Registration plate issues | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Steering headbearing has excessive free play |2.2.2| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Throttle operating incorrectly |6.2.1f| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Headlamp aim not tested |1.6| | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Indicator switch defective |1.5.4| | 1 |
Centre Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Centre Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Brake lever has inadequate reserve travel (3.1.3b) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Exhaust is leaking and excessively noisey (7.1.1b) | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Central Rear Stop lamp missing |1.3.3a| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Centre Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Central Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Direction indicator flashing more than 120 times per minute all |1.5.1c| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Front Indicator tell tale not functioning |1.5.2| | 1 |
Offside Indicator tell tale not functioning |1.5.2| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Horn not working |1.7.3a| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |