Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 13 |
Drive chain excessively loose |6.2.1d| | 9 |
Headlamp aim out of alignment | 8 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
Registration plate issues | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Horn not working |1.7.3a| | 3 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Drive chain worn to excess |6.2.1e| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Nearside Rear Direction indicators not working |1.5.1c| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Front position lamp insecure |1.1.1c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Nearside Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Horn control defective |1.7.2a| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Brake pedal is inoperative |3.1.3c| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Drive chain horseshoe locking device incorrectly fitted (6.1.7 (j) (i)) | 1 |
Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Rear Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Registration plate lamp issues | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Offside Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Front Footrest insecure |6.2.1a| | 1 |
Stop lamp not working from front control (4.3.1 (a) (ii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Fuel cap sealing washer missing |7.2.2c| | 1 |
Front Headlamp switch faulty |1.2.4| | 1 |
Front Horn control defective |1.7.2a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. (3.3.A2b) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Drive chain worn to excess (6.2.1e) | 1 |
Front Drive chain sprocket worn to excess (6.2.1e) | 1 |
Rear Drive chain sprocket worn to excess (6.2.1e) | 1 |
Wheel alignment incorrect which adversely affects the handling (2.5.1) | 1 |
Rear Wheel spoke excessively loose (4.2.1b) | 1 |
Rear reflector on motorcycle incorrectly positioned (1.4.2d) | 1 |
Rear wheel bearings have excessive free play (2.4.A.2c) | 1 |
Rear Brake disc|s| cracked |3.2.A1g| | 1 |