Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 36 |
Headlamp aim out of alignment | 24 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
Registration plate issues | 16 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 7 |
Drive chain excessively loose |6.2.1d| | 6 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Exhaust is leaking and excessively noisey |7.1.1b| | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Horn not working |1.7.3a| | 5 |
Drive chain worn to excess |6.2.1e| | 4 |
Direction indicators not working |1.5.1c| | 4 |
Offside Steering lock stop ineffective |2.1.3| | 4 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 4 |
Offside Rear Direction indicator not working |1.5.1c| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Handlebar deformed |2.1.1b| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Nearside Steering lock stop ineffective |2.1.3| | 3 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Front Steering headbearing has excessive free play |2.2.2| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Front Direction indicator insecure |1.5.3b| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Brake lever mounting insecure |3.1.2a| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 2 |
Offside Front Direction indicator insecure |1.5.3b| | 2 |
Rear mono-shock pivot seized |2.4.B.4| | 2 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Brake hose excessively deteriorated | 1 |
Indicator tell tale not functioning |1.5.2| | 1 |
Nearside Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Offside Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Nearside Front Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Rear Stop lamp missing |1.3.3a| | 1 |
Offside Front Brake cable badly frayed |3.2.A1b| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Centre Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Offside Rear Wheel spoke missing |4.2.1b| | 1 |
Nearside Front Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Nearside Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Brake lever cannot be released smoothly |3.1.3d| | 1 |
Rear reflector on motorcycle insecure |1.4.2c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Nearside Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 1 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front Motorcycle structure excessively distorted |6.1.1a| | 1 |
Front suspension assembly component excessively bent |2.3.1| | 1 |
Position lamp switch faulty |1.1.4a| | 1 |
Front Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Nearside Brake lever mounting insecure |3.1.2a| | 1 |
Nearside Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Steering lock stop missing |2.1.3| | 1 |
Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
Brake lever cracked |3.1.2c| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
Rear Wheel damaged significantly reducing the original strength |4.2.1a| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected |6.2.7 |a| |ii|| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front suspension assembly component loose |2.3.1| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Motorcycle structure adversely modified |6.1.1b| | 1 |
Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
Nearside Rear Drive chain worn to excess |6.2.1e| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Rear Brake fluid reservoir insecurely mounted |3.2.B1a| | 1 |
Front Brake pedal is inoperative |3.1.3c| | 1 |
Nearside Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Direction indicator insecure |1.5.3b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Footrest missing |6.2.1a| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear position lamp obscured more than 50% |1.1.1d| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Rear Front mudguard insecure |2.3.7| | 1 |
Front Wheel spoke excessively loose |4.2.1b| | 1 |
Rear Wheel spoke cracked. |4.2.1b| | 1 |
Rear Wheel spoke excessively loose |4.2.1b| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Nearside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Direction indicator obscured |1.5.1a| | 1 |
Offside Rear Direction indicator insecure |1.5.3b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |