Most common failures | No# failures |
---|
Headlamp aim out of alignment | 21 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Registration plate issues | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Steering headbearing has excessive free play |2.2.2| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Offside Rear Footrest missing |6.2.1a| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 3 |
Nearside Front Direction indicator insecure |1.5.3b| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Horn not working |1.7.3a| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Fuel cap sealing washer missing |7.2.2c| | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 2 |
Rear Footrest missing |6.2.1a| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Brake hose damaged | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Headlamp aim not tested |1.6| | 1 |
Rear Brake hose stretched by suspension movement |3.2.B3b| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Nearside Front Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Offside Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
Stop lamp not working front lever switch (4.3.1 (a) (ii)) | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Decelerometer brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Floor brake test indicates a severely grabbing brake (3.3.C2d) | 1 |
Front Exhaust is leaking and excessively noisey (7.1.1b) | 1 |
Throttle operating incorrectly (6.2.1f) | 1 |
Rear position lamp does not illuminate immediately when it is switched on New bulbs fitted. (1.1.3a) | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Rear Direction indicators affected by the operation of another lamp poor light output |1.5.1c| | 1 |
Nearside Front Direction indicators affected by the operation of another lamp poor light output |1.5.1c| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Headlamp insecure (4.1.1 (c)) | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Rear Brake hose excessively kinked |3.2.B3a| | 1 |
Front Brake hose excessively kinked |3.2.B3a| | 1 |
Nearside Front Motorcycle structure excessively damaged |6.1.1a| | 1 |
Position lamp switch does not operate the front and rear position lamps |1.1.4c| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Front Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Stop lamp does not illuminate immediately a brake applies rear system |1.3.1a| | 1 |
Registration plate lamp issues | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Steering control has Insufficient clearance at full lock affecting the riders operation of the controls |2.1.2b| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Brake hose connection leaking banjo at rear calliper (1.1.12 (c)) | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp not working rear brake |4.3.1 |a| |ii|| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Rear All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Upper Front suspension assembly component loose |2.3.1| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Rear Fuel cap sealing washer missing |7.2.2c| | 1 |
Front Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Brake lever pivots excessively worn |3.1.3a| | 1 |
Offside Front Brake lever pivots excessively worn |3.1.3a| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Nearside All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Position lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Offside Rear Footrest missing (6.2.12 (a)) | 1 |
Centre Front Headlamp aim headlamp damaged and function impaired head lamp damaged and lights are dim |1.2.3a| | 1 |
Nearside Rear Footrest missing missing |6.2.1a| | 1 |
Offside Rear Position lamp not working (4.2.1 (a)) | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Rear Wheel more than one fixing loose (5.2.1 (a) (ii)) | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Inner Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Front wheel bearings are excessively rough |2.3.5b| | 1 |
Nearside Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Offside Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Centre Front Lower Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |