| Most common failures | No# failures |
|---|
| Windscreen wiper does not clear the windscreen effectively | 5 |
| Brake hose excessively deteriorated | 4 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Rear brake application uneven | 2 |
| Registration plate lamp issues | 2 |
| Rear brake binding | 2 |
| Headlamp aim out of alignment | 2 |
| Brakes imbalanced across an axle | 2 |
| Windscreen wiper not working (3.4 (a)) | 2 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 2 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Front Direction indicator incorrect colour BOTH (4.4.3 (a)) | 1 |
| Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Front Exhaust has a major leak of exhaust gases DOWNPIPE (6.1.2 (a)) | 1 |
| Nearside Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Offside Headlamp aim unable to be tested (4.1.2 (b)) | 1 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Offside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Fuel pipe leaking |7.2.3| | 1 |
| Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
| Exhaust emissions exceed manufacturer`s specified limit |8.2.2.2 |a|| | 1 |
| Exhaust emissions exceed level of metered smoke for a turbo charged engine |8.2.2.2 |b|| | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front brake caliper has restricted free movement |3.5.1k| | 1 |
| Brake load sensing valve seized |3.6.E.3| | 1 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Centre Exhaust system not adequately supported 3 mounts broken |7.1.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at forwardmost spring hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill at forwardmost spring hanger (5.3.6 (a) (i)) | 1 |
| Windscreen washer not working | 1 |
| Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 1 |
| Offside Front Seat belt buckle not functioning as intended (7.1.2 (d)) | 1 |
| Emissions unable to be completed vehicle will not rev (8.2.2.2 (e)) | 1 |
| Offside Front Service brake lagging in operation (1.2.1 (d)) | 1 |
| Nearside Front Service brake lagging in operation (1.2.1 (d)) | 1 |
| Brake load sensing valve seized but ABS functioning |1.1.17 |c| |i|| | 1 |
| Offside Front Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
| Nearside Front Passenger`s seat insecure |6.2.A.1| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front mount (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear mount (5.3.6 (a) (i)) | 1 |
| Brake load sensing valve linkage defective and function impaired (1.1.17 (a)) | 1 |