Most common failures | No# failures |
---|
Brake pipe excessively corroded | 15 |
Headlamp aim out of alignment | 14 |
Registration plate lamp issues | 12 |
Windscreen wiper does not clear the windscreen effectively | 10 |
Horn not working |1.6.2a| | 8 |
Rear brake binding | 5 |
Service brake: efficiency below requirements |3.7.B.7| | 5 |
Nearside Headlamp aim beam image kick up to the offside |1.8| | 5 |
Offside Headlamp aim beam image kick up to the offside |1.8| | 5 |
Rear fog lamp not working |1.3.2b| | 5 |
Offside Front position lamp|s| not working |1.1.A.3b| | 4 |
Headlamp aim beam image kick up to the offside |1.8| | 4 |
Offside Rear fog lamp not working |1.3.2b| | 3 |
Nearside Side repeater not working |1.4.A.2c| | 2 |
Offside Side repeater not working |1.4.A.2c| | 2 |
Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 2 |
Nearside Front position lamp|s| not working |1.1.A.3b| | 2 |
Nearside Front Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 2 |
Offside Front Position lamp not working |4.2.1 |a|| | 2 |
Parking brake: efficiency below requirements |3.7.B.7| | 2 |
Brakes imbalanced across an axle | 2 |
Nearside Side repeater missing |1.4.A.2b| | 2 |
Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 2 |
Nearside Headlamp not working on main beam |1.7.5a| | 2 |
Nearside Front Position lamp not working |4.2.1 |a|| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Brake hose excessively deteriorated | 2 |
Offside Side repeater not working (4.4.1 (a) (ii)) | 1 |
Nearside Stop lamp(s) not working (4.3.1 (a) (ii)) | 1 |
Rear parking brake recording little or no effort | 1 |
Battery insecure |1.9.1| | 1 |
Nearside Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 1 |
Headlamp not in good working order adversely affecting beam image |1.2.4a| | 1 |
Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
Offside Front Direction indicator not working |1.4.A.2c| | 1 |
Offside Front Side repeater not working |1.4.A.2c| | 1 |
Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Offside Headlamp aim aimed so that it dazzles other road users |1.8.A.1a| | 1 |
Nearside Indicator tell tale inoperative |1.4.A.2a| | 1 |
Offside Indicator tell tale inoperative |1.4.A.2a| | 1 |
Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 1 |
Nearside Obligatory mirror insecure |8.1.1| | 1 |
Nearside Steering rack gaiter split |2.2.D.2d| | 1 |
Offside Rear Outline marker lamp light intensity significantly reduced (4.2.3 (a) (ii)) | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c)) | 1 |
Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg (6.1.1 (c) (i)) | 1 |
Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg in two places on inner wheel arch (6.1.1 (c) (i)) | 1 |
Nearside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis on inner wheel arch (6.1.1 (c) (i)) | 1 |
Nearside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Outrigger corroded (6.1.1 (c) (i)) | 1 |
Offside Rear wheel bearing rough when rotated |2.6.1| | 1 |
Exhaust has a major leak of exhaust gases middle box |7.1.2| | 1 |
Nearside Side repeater not working |4.4.1 |a| |ii|| | 1 |
Fuel cap/sealing device does not fasten securely by positive means |7.2.4b| | 1 |
Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
Nearside Stop lamp not working |1.2.1b| | 1 |
Nearside Front Side repeater not working |1.4.A.2c| | 1 |
Hazard warning switch faulty |1.4.B.1d| | 1 |
Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Front Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced cross member |6.1.1 |b| |ii|| | 1 |
Nearside Front Passenger`s seat insecure |6.2.A.1| | 1 |
Offside Rear fog lamp missing |1.3.2a| | 1 |
Nearside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
Offside Rear Seat belt retracting mechanism defective |5.2.5b| | 1 |
Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
Rear fog lamp tell tale not working |1.3.1b| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Nearside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Offside Front brake disc excessively scored |3.5.1h| | 1 |
Nearside Front brake disc excessively pitted |3.5.1h| | 1 |
Front brake disc in such a condition that it is seriously weakened | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Emissions not tested |7.0| | 1 |
Nearside Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Bumper insecure |6.1.4 |a| |i|| | 1 |
Nearside Front Seat belt anchorage loose |7.1.1 |b|| | 1 |
Nearside Headlamp insecure |1.7.3| | 1 |
Rear fog lamp obscured more than 50% |1.3.2c| | 1 |
Hazard warning switch inoperative (4.4.2 (a) (ii)) | 1 |
Brake servo defective or ineffective (1.1.10 (a) (i)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Offside Rear Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
Rear Brake load sensing valve seized |3.6.E.3| | 1 |
Brake has no servo assistance |3.3.B.2| | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Rear Brake pipe leaking on a hydraulic braking system front to rear, in front of fuel tank |1.1.11 |b| |ii|| | 1 |
Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
Steering system has excessive free play detected at the steering wheel |steering rack fitted| steering rack internal bushes |2.2.A.1b| | 1 |
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Front Brake hose leaking |3.6.A.1| | 1 |
Rear Brake pipe leaking |3.6.A.1| | 1 |
Offside Rear Position lamp not working |4.2.1 |a|| | 1 |
Brake hydraulic reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 1 |
Nearside Front Shock absorbers has a serious fluid leak | 1 |
Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 1 |
Front Suspension component attachment bracket/mounting corroded and seriously weakened crossmember (5.3.3 (b) (i)) | 1 |
Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
Offside Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Brake load sensing valve inoperative |3.6.E.3| | 1 |
Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
Nearside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Offside Front Headlamp aim projected beam image is obviously incorrect |4.1.2 |c|| | 1 |
Oil leaking excessively from engine |8.4.1 |a| |i|| | 1 |
Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt |5.3.4 |b| |ii|| | 1 |
Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
Rear Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
Nearside Front Headlamp aim beam image too far to the right |1.6.B4| | 1 |
Offside Front Headlamp aim beam image too far to the right |1.6.B4| | 1 |
Offside Front Outline marker lamp not working |4.2.1 |a| |ii|| | 1 |
Headlamp levelling device inoperative |4.1.5 |a|| | 1 |
Offside Headlamp levelling device inoperative |4.1.5 |a|| | 1 |
Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Offside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
Exhaust system not adequately supported |7.1.1| | 1 |
Headlamp aim beam image kick up to the offside both sides |1.8| | 1 |
Front Horn not working |1.6.2a| | 1 |
Nearside Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
Offside Rear fog lamp adversely affected by the operation of another lamp |1.3.2f| | 1 |
Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
Offside Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Offside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
Headlamp aim beam image kick up to the offside nearside & offside |1.8| | 1 |
Offside Drivers seat fore and aft adjustment mechanism not functioning as intended. (6.2.5 (b) (i)) | 1 |
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step (7.1.1 (a) (i)) | 1 |
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 1 |
Nearside Rear position lamp|s| obscured more than 50% |1.1.A.3c| | 1 |
Offside Rear position lamp|s| obscured more than 50% |1.1.A.3c| | 1 |
Towbar component insecure |6.6.1| | 1 |
Towbar mounting obviously of an inappropriate type |6.6.2| | 1 |
Towbar fixing obviously of an inappropriate type |6.6.2| | 1 |
Nearside Front Lower Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
Stop lamp not working |1.2.1b| | 1 |
Hazard warning lamps inoperative |1.4.B.1b| | 1 |
Main beam `tell-tale` not working |1.7.4c| | 1 |
Bonnet cannot be secured in the closed position |8.4.1| | 1 |
Offside Rear Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
Offside Rear Stop lamp not working |1.2.1b| | 1 |
Front passenger door does not latch securely closed |6.2.B.1a| | 1 |
Brake load sensing valve seized |3.6.E.3| | 1 |
Rear Body insecure and dangerous to other road users |6.1.B.1b| | 1 |
Nearside Front Coil spring not correctly located |2.4.C.2| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Rear Stop lamp not working |1.2.1b| | 1 |