Most common failures | No# failures |
---|
Windscreen wiper does not clear the windscreen effectively | 3 |
Parking brake: efficiency below requirements |3.7.B.7| | 3 |
Direction indicators incorrect colour |1.4.A.2f| | 2 |
rear parking |secondary| brakes imbalanced | 2 |
Rear brake binding | 2 |
Nearside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
Nearside Front Ball joint has excessive play |2.2.B.1f| | 1 |
Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
Nearside Inner Rear Seat belt retracting mechanism defective |5.1.B.6b| | 1 |
Offside Front Suspension arm has excessive play in a pin/bush |2.4.G.3| | 1 |
Centre Exhaust mounting missing |6.3.1b| | 1 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
Offside Headlamp not working on main beam |1.7.5a| | 1 |
Windscreen wiper not operating automatically when switched on |8.2.1b| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Offside Stop lamp not working |1.2.1b| | 1 |
Nearside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded at strut mounting area |2.4.A.3| | 1 |
Rear Suspension spring mounting prescribed area is excessively corroded across rear crossmember |2.4.A.3| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Headlamp aim out of alignment | 1 |
Offside Headlamp aim not tested |4.1.2 |b|| | 1 |
Offside Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Offside Front Position lamp not working |4.2.1 |a|| | 1 |
Power steering malfunctioning |2.1.5 |a|| | 1 |
Nearside Front Steering component mounting prescribed area is excessively corroded |2.1.2 |e| |i|| | 1 |
Offside Front Steering component mounting prescribed area is excessively corroded |2.1.2 |e| |i|| | 1 |
Power steering pipe/hose leaking pipes on rack |2.1.5 |a|| | 1 |
Oil leaking excessively from engine |8.4.1 |a| |i|| | 1 |
Hydraulic fluid leaking excessively power steering is leaking |8.4.1 |a| |i|| | 1 |
Exhaust system insecure some mountings are missing |6.1.2 |a|| | 1 |
Steering rack gaiter missing or no longer prevents the ingress of dirt |2.1.3 |g| |ii|| | 1 |
Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt |6.1.7 |g| |ii|| | 1 |
Offside Front Shock absorbers has a serious fluid leak | 1 |
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at various points |5.3.6 |a| |i|| | 1 |
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at various points |5.3.6 |a| |i|| | 1 |
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at various points |5.3.6 |a| |i|| | 1 |
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength at various points |5.3.6 |a| |i|| | 1 |
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
Offside Front Steering rack gaiter split |2.2.D.1d| | 1 |
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Horn device not of a constant note |6.2.1e| | 1 |
Brake performance not tested |3.8| | 1 |
Service brake: efficiency below requirements |3.7.B.7| | 1 |
Transmission brake efficiency below requirements |3.8.A.9/10| | 1 |
Horn not working |1.6.2a| | 1 |
Headlamp not working on dipped beam |1.7.5a| | 1 |
Nearside Front Braking system leaking |3.6.A.1| | 1 |
Offside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
Rear Body has a projection caused by damage |6.1.C.1| | 1 |
Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
Nearside Front front brake binding |3.7.B.1| | 1 |
Offside front brake binding |3.7.B.1| | 1 |
Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |