Most common failures | No# failures |
---|
Brake pipe excessively corroded | 10 |
Registration plate lamp issues | 4 |
Exhaust system not adequately supported (7.1.1) | 2 |
Offside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
Nearside Headlamp aim beam image obviously incorrect (1.8.A.1b) | 1 |
Offside Headlamp aim beam image obviously incorrect (1.8.A.1b) | 1 |
Rear fog lamp switch faulty (1.3.1a) | 1 |
Offside Rear fog lamp not working (1.3.2b) | 1 |
Stop lamp not working center (1.2.1b) | 1 |
Front Anti-roll bar attachment bracket/mounting insecure lower (2.4.G.1) | 1 |
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings step (6.1.B.2) | 1 |
Nearside Rear Front wheel bearing has excessive play (2.5.A.3c) | 1 |
Brakes imbalanced across an axle | 1 |
Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
Nearside Headlamp aim projected beam image is obviously incorrect beam image kick up to the right (4.1.2 (c)) | 1 |
Offside Headlamp aim projected beam image is obviously incorrect beam image kick up to the right (4.1.2 (c)) | 1 |
Front passenger door cannot be opened from inside the vehicle (6.2.B.1b) | 1 |
Parking brake: efficiency below requirements (3.7.B.7) | 1 |
Rear fog lamp not working (1.3.2b) | 1 |
Nearside Headlamp aim beam image kick up to the offside (1.8) | 1 |
Offside Headlamp aim beam image kick up to the offside (1.8) | 1 |
Nearside Front Lower Suspension arm has excessive play in a ball joint (2.4.G.2) | 1 |
Nearside Front Direction indicator incorrect colour (1.4.A.2f) | 1 |
Offside Front Direction indicator incorrect colour (1.4.A.2f) | 1 |
Nearside Rear Direction indicator incorrect colour (1.4.A.2f) | 1 |
Offside Rear Direction indicator incorrect colour (1.4.A.2f) | 1 |
Offside Stop lamp not working (1.2.1b) | 1 |
Exhaust system insecure x4 rubbers and x1 hanger required (6.1.2 (a)) | 1 |
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced around jacking point and subframe mounting areas (6.1.1 (c) (i)) | 1 |
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Around jacking points and subframe mounting areas (6.1.1 (c) (i)) | 1 |
Nearside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sub frame mounting area (5.3.6 (a) (i)) | 1 |
Offside Sub-frame corroded and seriously weakened Near upper mounting bolt area (5.3.3 (b) (i)) | 1 |
Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Wheel arch area x3 (5.3.6 (a) (ii)) | 1 |
Nearside Front Inner Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Wheel arch x4 (5.3.6 (a) (ii)) | 1 |
Offside Front Inner Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected Wheel arch x5 (5.3.6 (a) (ii)) | 1 |
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
Nearside Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
Nearside Front Suspension component mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
Nearside Stop lamp not working (1.2.1b) | 1 |
Centre Stop lamp not working (1.2.1b) | 1 |
Nearside Rear position lamp(s) not working (1.1.A.3b) | 1 |
Nearside Upper Rear position lamp(s) not working (1.1.A.3b) | 1 |
Offside Upper Rear position lamp(s) not working (1.1.A.3b) | 1 |
Nearside Upper Front position lamp(s) not working (1.1.A.3b) | 1 |
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
Nearside Front wheel bearing has excessive play (2.5.A.3c) | 1 |
Exhaust has a major leak of exhaust gases (7.1.2) | 1 |
Nearside Front suspension has excessive play in a lower suspension ball joint (2.5.B.1a) | 1 |
Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.2) | 1 |
Offside Rear Stop lamp not working (1.2.1b) | 1 |
Registration plate issues | 1 |
Horn not working (1.6.2a) | 1 |