| Most common failures | No# failures |
|---|
| Brake pipe excessively corroded | 97 |
| Windscreen wiper does not clear the windscreen effectively | 54 |
| Headlamp aim out of alignment | 50 |
| Horn not working |1.6.2a| | 36 |
| Registration plate lamp issues | 32 |
| Nearside Stop lamp not working |1.2.1b| | 16 |
| Offside Stop lamp not working |1.2.1b| | 16 |
| Rear brake binding | 14 |
| Brakes imbalanced across an axle | 13 |
| Exhaust emissions carbon monoxide content after 2nd fast idle excessive |7.3.D.3| | 13 |
| Exhaust emissions Lambda reading after 2nd fast idle outside specified limits |7.3.D.3| | 12 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 9 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 8 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 8 |
| Parking brake: efficiency below requirements |3.7.B.7| | 8 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 8 |
| Registration plate issues | 7 |
| Exhaust emissions carbon monoxide content at idle excessive |7.3.D.4| | 7 |
| Battery insecure |1.9.1| | 7 |
| Exhaust system not adequately supported |7.1.1| | 6 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 6 |
| Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 5 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 5 |
| Offside Rear fog lamp not working |1.3.2b| | 5 |
| Nearside Rear Direction indicator incorrect colour |1.4.A.2f| | 5 |
| Exhaust emissions hydrocarbon content after 2nd fast idle excessive |7.3.D.3| | 5 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 5 |
| Emissions not tested |7.0| | 5 |
| Horn not working (7.7 (a)) | 5 |
| Nearside Rear Direction indicators incorrect colour |1.4.A.2f| | 4 |
| Windscreen has damage | 4 |
| Offside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 4 |
| Nearside Rear Shock absorber has negligible damping effect |2.7.5| | 4 |
| Offside Rear Shock absorber has a serious fluid leak |2.7.3| | 4 |
| Nearside Rear Shock absorber has a serious fluid leak |2.7.3| | 4 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 4 |
| Front brake excessively fluctuating | 4 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c)) | 4 |
| Service brake: efficiency below requirements |3.7.B.7| | 3 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Headlamp not working on main beam |1.7.5a| | 3 |
| Exhaust mounting missing |7.1.1b| | 3 |
| Offside Front Track rod end ball joint has excessive play |2.2.B.1f| | 3 |
| Offside Rear Direction indicator incorrect colour |1.4.A.2f| | 3 |
| Offside Front Direction indicator incorrect colour |1.4.A.2f| | 3 |
| Rear Brake load sensing valve linkage seized |3.6.E.3| | 3 |
| Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 3 |
| Offside Rear Direction indicators incorrect colour |1.4.A.2f| | 3 |
| Hazard warning tell tale not working correctly |1.4.B.1e| | 3 |
| Rear fog lamp switch faulty |1.3.1a| | 3 |
| Nearside Headlamp not working on main beam |1.7.5a| | 3 |
| Brake load sensing valve linkage seized |3.6.E.3| | 3 |
| Exhaust has part of the system excessively deteriorated |7.1.1a| | 3 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 3 |
| Hazard warning switch inoperative (4.4.2 (a) (ii)) | 3 |
| Offside Rear Rear fog lamp not working (4.5.1 (a) (ii)) | 3 |
| Offside Rear Shock absorbers has a serious fluid leak | 2 |
| Offside Front Direction indicator not working |1.4.A.2c| | 2 |
| Rear Direction indicators incorrect colour |1.4.A.2f| | 2 |
| Nearside Rear Shock absorbers has a serious fluid leak | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 2 |
| Exhaust Lambda reading after 2nd fast idle outside specified limits |8.2.1.2 |c|| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Headlamp not working on dipped beam |1.7.5a| | 2 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Offside Rear Stop lamp not working |1.2.1b| | 2 |
| Exhaust emissions carbon monoxide content excessive |7.3.B.1a| | 2 |
| Nearside Exhaust mounting missing |7.1.1b| | 2 |
| Front brake disc in such a condition that it is seriously weakened | 2 |
| Rear parking brake recording little or no effort | 2 |
| Nearside Front Wheel nut|s| missing |4.2.A.1e| | 2 |
| Nearside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 2 |
| Nearside Front Macpherson strut upper support bearing is rough in operation |2.5.B.1b| | 2 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 2 |
| Offside Front Direction indicators incorrect colour |1.4.A.2f| | 2 |
| Nearside Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
| Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Centre Exhaust system not adequately supported |7.1.1| | 2 |
| Nearside Side repeater not working |1.4.A.2c| | 2 |
| Rear Exhaust system not adequately supported |7.1.1| | 2 |
| Nearside Rear Stop lamp not working |1.2.1b| | 2 |
| Horn not working |7.7 |a| |ii|| | 2 |
| Direction indicators incorrect colour |1.4.A.2f| | 2 |
| Brake performance not tested |3.7.A.1| | 2 |
| Centre Rear Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Offside Front Brake pipe leaking |3.6.A.1| | 2 |
| Supplementary Restraint System warning lamp indicates a fault |5.4.2| | 2 |
| Rear wheel bearing has excessive play |2.6.2| | 2 |
| Rear brake application uneven | 2 |
| Offside Rear Shock absorber has negligible damping effect |2.7.5| | 2 |
| Nearside Front Windscreen wiper blade deteriorated |8.2.2| | 2 |
| Offside Front Windscreen wiper blade deteriorated |8.2.2| | 2 |
| Offside Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 2 |
| Nearside Front Track rod end ball joint has excessive play |2.2.B.1f| | 2 |
| Nearside Front wheel bearing rough when rotated |2.5.A.2| | 2 |
| Horn not working (7.7 (a) (ii)) | 2 |
| Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 2 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 2 |
| Exhaust system insecure (6.1.2 (a)) | 2 |
| Windscreen washer not working | 2 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b)) | 2 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 2 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 2 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 2 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded upper shock mount |2.4.A.3| | 1 |
| Fuel cap/sealing device missing |7.2.4a| | 1 |
| Rear fog lamp adversely affected by the operation of another lamp |1.3.2f| | 1 |
| Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis leg upper next to engine mounting |6.2.2 |d| |i|| | 1 |
| Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded extensive corrosion to chassis outrigger and floor adjacent to seat belt and seat mountings |5.2.6| | 1 |
| Offside Front Seat belt anchorage prescribed area is excessively corroded extensive corrosion to chassis outrigger and floor adjacent to seat belt and seat mountings |5.2.6| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point on chassis rotten |6.1.B.2| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings jacking point on chassis rotten |6.1.B.2| | 1 |
| Nearside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt split |2.4.G.2| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outriggers rotten |6.1.B.2| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis outriggers rotten |6.1.B.2| | 1 |
| Offside Front Outer Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Rear of the wheel arch |6.2.2 |d| |i|| | 1 |
| Suspension component mounting prescribed area is excessively corroded rearmost crossmember rusted through |2.4.A.3| | 1 |
| Offside Front Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Rear Mechanical brake component has restricted free movement | 1 |
| Nearside Rear Brake load sensing valve seized |3.6.E.3| | 1 |
| Exhaust emissions carbon monoxide content at idle excessive 0.44 |7.3.D.4| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded crossmember |2.4.A.3| | 1 |
| Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Nearside Front Brake hose excessively damaged |3.6.B.4d| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Windscreen wiper not operating over a large enough area to give an adequate view |8.2.1c| | 1 |
| Offside Front Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Rear Rear reflector excessively damaged so that its function is impaired |1.5.1c| | 1 |
| Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Nearside Rear reflector not red in colour |1.5.1d| | 1 |
| Offside Exhaust mounting missing |7.1.1b| | 1 |
| Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Front position lamp|s| not working |1.1.A.3b| | 1 |
| Upper Macpherson strut upper support bearing is rough in operation |2.5.B.1b| | 1 |
| Nearside Stop lamp adversely affected by the operation of another lamp |1.2.1f| | 1 |
| Offside Track rod end ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced in front of rear axle. |6.1.1 |c| |i|| | 1 |
| Exhaust carbon monoxide content at idle exceeds manufacturer`s specified limits |8.2.1.2 |b|| | 1 |
| Offside Rear rear brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Rear Hydraulic brake cylinder leaking hydraulic fluid |3.6.A.1| | 1 |
| Offside Front Wheel nut|s| missing |4.2.A.1e| | 1 |
| Nearside Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Nearside Front Bonded suspension unit deteriorated and cannot function as intended |2.4.F.3| | 1 |
| Front brake disc excessively pitted |3.5.1h| | 1 |
| Brake load sensing valve linkage defective and function impaired |3.6.E.3| | 1 |
| Nearside Front Macpherson strut upper support bearing is stiff in operation |2.5.B.1b| | 1 |
| Offside Front Macpherson strut upper support bearing is stiff in operation |2.5.B.1b| | 1 |
| Nearside Front Wheel bolt|s| missing |4.2.A.1e| | 1 |
| Fuel tank leaking |7.2.3| | 1 |
| Offside Front Macpherson strut upper support bearing is rough in operation |2.5.B.1b| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Offside Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Nearside Front Lower Ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting cross member |6.2.2 |d| |i|| | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jack point |5.3.6 |a| |i|| | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cill |5.3.6 |a| |i|| | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced step area |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner arch |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner box |6.1.B.2| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Direction indicators incorrect colour |1.4.A.2f| | 1 |
| Nearside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Speedometer clearly inoperative |6.7.2| | 1 |
| Nearside Rear Leaf spring to axle securing nut missing |2.4.B.7b| | 1 |
| Offside Rear Leaf spring to axle securing nut missing |2.4.B.7b| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Front position lamp|s| not in good working order |function impaired| |1.1.4a| | 1 |
| Offside Front Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
| Front Exhaust mounting missing |7.1.1b| | 1 |
| Offside Front Wheel bolt|s| missing |4.2.A.1e| | 1 |
| Nearside Side repeater incorrect colour |1.4.A.2f| | 1 |
| Offside Side repeater incorrect colour |1.4.A.2f| | 1 |
| Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Nearside Front Electrical wiring likely to drag on the ground |4.11 |a| |iii|| | 1 |
| Offside Front Service brake excessively fluctuating |1.2.1 |e|| | 1 |
| Offside front brake binding Binding in RBT Rollers |3.7.B.1| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Rear Suspension component mounting prescribed area is excessively corroded cross member |2.4.A.3| | 1 |
| Centre Exhaust has part of the system excessively deteriorated |7.1.1a| | 1 |
| Front Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Rear Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Power steering inoperative |2.3.3a| | 1 |
| Brake pedal anti-slip provision worn smooth |3.3.A.1b| | 1 |
| Offside Front brake disc excessively pitted |3.5.1h| | 1 |
| Offside Rear position lamp|s| incorrect colour |1.1.A.3e| | 1 |
| Nearside Front front brake juddering severely |3.7.A.2b| | 1 |
| Offside front brake juddering severely |3.7.A.2b| | 1 |
| Offside Rear Leaf spring fractured |2.4.B.1a| | 1 |
| Nearside Rear Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Windscreen wiper blade deteriorated |8.2.2| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Nearside front brake binding |3.7.B.1| | 1 |
| Power steering pipe/hose leaking |2.1.5 |a|| | 1 |
| Nearside Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Offside Rear Lower Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Nearside Front Brake prescribed area is excessively corroded inner arch |1.1.21 |e| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength body |5.3.6 |a| |i|| | 1 |
| Power steering pipe/hose excessively corroded |2.1.5 |g| |i|| | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting |6.2.2 |d| |i|| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Steering component deformed and unserviceable top steering rack gaiter |2.2.C.1d| | 1 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger |6.1.B.2| | 1 |
| Offside Outer Vehicle structure has excessive corrosion which adversely affects braking or steering sill |full length| |6.1.A.1| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill |6.1.B.2| | 1 |
| Nearside Rear Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Front Driver`s seat insecure |6.2.A.1| | 1 |
| Nearside Front Passenger`s seat insecure |6.2.A.1| | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting sill and rear valance |6.6.6| | 1 |
| Offside Rear Vehicle structure excessively corroded within 30cm of towbar mounting sill and valance |6.6.6| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded front and rear |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded wheel arch |2.4.A.3| | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Rear Outer Suspension spring mounting prescribed area is excessively corroded sill |2.4.A.3| | 1 |
| Offside Front Braking system leaking |3.6.A.1| | 1 |
| Offside Front Upper Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Offside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Offside Front Brake hydraulic reservoir cap missing |3.6.G.1a| | 1 |
| Nearside Front Headlamp not working on dipped beam |1.7.5a| | 1 |
| Offside Front Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Nearside Front Brake pipe inadequately supported |3.6.B.1| | 1 |
| Offside Side repeater not working |1.4.A.2c| | 1 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front Side repeater not working |1.4.A.2c| | 1 |
| Offside front brake binding |3.7.B.1| | 1 |
| Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| front brake binding |3.7.B.1| | 1 |
| Offside Rear fog lamp excessively damaged so that it is not visible from a reasonable distance |1.3.2d| | 1 |
| Nearside Front Inner Brake pipe likely to become detached or damaged |1.1.11 |d| |ii|| | 1 |
| Offside Front Inner Brake pipe likely to become detached or damaged |1.1.11 |d| |ii|| | 1 |
| Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected |5.3.6 |a| |ii|| | 1 |
| Offside Front Lower Suspension component mounting prescribed area excessively corroded significantly reducing structural strength |5.3.6 |a| |i|| | 1 |
| Central Front Lower Power steering pipe/hose excessively corroded |2.1.5 |g| |i|| | 1 |
| Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Front Horn not working |1.6.2a| | 1 |
| Rear Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Seat belt stitching badly frayed |5.2.2b| | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Exhaust system not adequately supported |7.1.1| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Rear Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Dipswitch does not operate immediately when selected on main beam |4.1.3 |b|| | 1 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds default limits |8.2.1.2 |b|| | 1 |
| Exhaust carbon monoxide content after 2nd fast idle exceeds default limits |8.2.1.2 |b|| | 1 |
| Fuel system component insecure filter |7.2.1| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is fractured arch |2.4.A.3| | 1 |
| Windscreen washer control missing |8.2.1a| | 1 |
| Nearside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Central Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Nearside Front Suspension arm attachment bracket/mounting bolt missing |2.4.G.1| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing above front wheel |5.3.6 |a| |i|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing above front wheel |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Oil leaking excessively from engine |8.4.1 |a| |i|| | 1 |
| Nearside Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch |5.3.6 |a| |i|| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/jacking point |5.3.6 |a| |i|| | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill/outrigger |5.3.6 |a| |i|| | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength spring mount |5.3.6 |a| |i|| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded arch area |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded j/point area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded cill/outrigger area |2.4.A.3| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded rear x/member |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded rear x/member |2.4.A.3| | 1 |
| Rear Body has a sharp edge caused by corrosion bumper/step |6.1.C.1| | 1 |
| Central Exhaust system not adequately supported mounting rubber missing |7.1.1| | 1 |
| Nearside Headlamp not in a clean condition affecting beam image |1.2.4a| | 1 |
| Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Outer Sill |6.1.B.2| | 1 |
| Nearside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Offside Front Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Nearside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Nearside Front Headlamp levelling device obviously defective |1.7.2| | 1 |
| Nearside Side repeater insecure |1.4.A.2b| | 1 |
| Steering system excessively tight |2.2.D.1| | 1 |
| Exhaust emissions hydrocarbon content excessive |7.3.B.1b| | 1 |
| rear brakes release unevenly |3.7.B.4| | 1 |
| Hazard warning switch faulty |1.4.B.1d| | 1 |
| Nearside Windscreen has a sticker or other obstruction encroaching by more than 10mm within zone `A` |8.3.1b| | 1 |
| Offside Front Lower Suspension arm has excessive play in a ball joint |2.4.G.2| | 1 |
| Windscreen wiper blade insecure | 1 |
| Rear Stop lamp not working |1.2.1b| | 1 |
| Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 1 |
| Offside Front wheel bearing rough when rotated |2.5.A.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Brake hose excessively damaged |3.6.B.4d| | 1 |
| Offside Vehicle structure is cracked, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Front front brake juddering severely |3.7.A.2b| | 1 |
| Rear Wheel stud|s| missing |4.2.A.1e| | 1 |
| Front Wheel stud|s| missing |4.2.A.1e| | 1 |
| Offside Front Front constant velocity joint is insecure |2.5.C.1b| | 1 |
| Offside Rear Road wheel badly damaged |4.2.A.1a| | 1 |
| Exhaust engine idle speed too high |7.3.D.1| | 1 |
| Nearside Front Direction indicators not working |1.4.A.2c| | 1 |
| Headlamp not working on dipped beam |1.7.5a| | 1 |
| Headlamp not working on main beam |1.7.5a| | 1 |
| Offside Rear fog lamp switch faulty |1.3.1a| | 1 |
| Nearside Front Brake pipe leaking |3.6.A.1| | 1 |
| Headlamp aim not tested |1.8.A.1c| | 1 |
| Offside Exhaust has a major leak of exhaust gases tail pipe |6.1.2 |a|| | 1 |
| Exhaust emissions likely to be affected by an exhaust leak |8.2.2.1 |b|| | 1 |
| Emissions not tested |8.2.2.2 |e|| | 1 |
| Offside Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Offside Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced out rigger |7.1.1 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill |7.1.1 |a| |i|| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` items on mirror and screen |8.3.1e| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer and under sill |2.4.A.3| | 1 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded under sill |2.4.A.3| | 1 |
| Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a| | 1 |
| Rear Shock absorber has negligible damping effect |2.7.5| | 1 |
| Brake fluid warning lamp illuminated |3.6.G.2| | 1 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill |2.4.A.3| | 1 |
| Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced WING TO CHASSIS |6.1.1 |c| |i|| | 1 |
| Nearside Rear Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL TO FLOOR |6.1.1 |c| |i|| | 1 |
| Nearside Front Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Offside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength front leaf spring mount (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill (5.3.6 (a) (i)) | 1 |
| Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember x2 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Track rod end ball joint has excessive play (2.1.3 (b) (i)) | 1 |
| Exhaust has a major leak of exhaust gases centre box (6.1.2 (a)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Rear Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill /out rigger (5.3.6 (a) (i)) | 1 |
| Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength n/s & o/s inner sill / rigger holed (5.3.6 (a) (i)) | 1 |
| Offside Front Brake performance not tested brake jammed on (1.2.1 (g)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front hanger(outrigger) (5.3.6 (a) (i)) | 1 |
| Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/floor (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch/floor (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength jack up point (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength inner sill (5.3.6 (a) (i)) | 1 |
| Offside Rear Body panel corroded and likely to cause injury Outer wing panel/outer sill (6.2.1 (a) (i)) | 1 |
| Offside Body panel corroded and likely to cause injury Before wheel arch panel corroded/outer sill (6.2.1 (a) (i)) | 1 |
| Nearside Rear Inner Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired Sill (6.2.2 (d) (ii)) | 1 |
| Offside Rear Inner Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Upper Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
| Towbar with an unsafe modification to primary components (6.1.6 (g) (ii)) | 1 |
| Main beam tell-tale not working (4.9.1 (a) (ii)) | 1 |
| Suspension component mounting prescribed area excessively corroded significantly reducing structural strength rear chassis at o/s/r and n/s/r leaf spring rear mounts (5.3.6 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases tail pipe holed (6.1.2 (a)) | 1 |
| Nearside Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Nearside Front Exhaust system insecure (6.1.2 (a)) | 1 |
| Offside Front Brake pipe at imminent risk of failure or fracture X2 (1.1.11 (a)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Wheel arch (6.1.1 (c) (i)) | 1 |
| Nearside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Exhaust emissions likely to be affected by an exhaust leak (8.2.1.1 (b)) | 1 |
| Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rearmost hanger (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength foreward hanger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength front mounting (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength rear mounting (5.3.6 (a) (i)) | 1 |
| Offside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i)) | 1 |
| Offside Rear Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i)) | 1 |
| Nearside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wing near flexi hose mtgs (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i)) | 1 |
| Nearside Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill (6.2.2 (d) (i)) | 1 |
| Nearside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting outrigger (6.2.2 (d) (i)) | 1 |
| Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting crossmember / leaf spring mounting (6.2.2 (d) (i)) | 1 |
| Offside Rear Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Nearside Rear Position lamp has a product on the lens or light source which shows white light to the rear (4.2.3 (b) (ii)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Vehicle structure excessively corroded within 30cm of towbar mounting (6.1.6 (i) (i)) | 1 |
| Front Bumper damaged and likely to cause injury when grazed or contacted (6.1.4 (a) (i)) | 1 |
| Exhaust system insecure hangers broken........ (6.1.2 (a)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength crossmember........ (5.3.6 (a) (i)) | 1 |
| Nearside Front Seat belt anchorage loose catch (7.1.1 (b)) | 1 |
| Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength leg area front mount rear spring (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength panel corner (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength wheel arch area (5.3.6 (a) (i)) | 1 |
| Nearside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Front Anti-roll bar ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Brake pipe connection leaking on an air braking system (1.1.11 (b) (i)) | 1 |
| Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting under wheel arch (6.2.2 (d) (i)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Offside Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Anti-roll bar linkage pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
| Offside Windscreen wiper not working (3.4 (a)) | 1 |
| Nearside Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill x3 (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Rear Suspension component mounting prescribed area excessively damaged significantly reducing structural strength Cross member (5.3.6 (a) (i)) | 1 |
| Fuel cap/sealing device ineffective (6.1.3 (b) (i)) | 1 |
| Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b)) | 1 |
| Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a)) | 1 |
| Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill (6.1.1 (c) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill x2 (5.3.6 (a) (ii)) | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill/chassis (7.1.1 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 1 |
| Offside Rear Outer Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Offside Front Brake pipe likely to become detached or damaged (1.1.11 (d) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill (5.3.6 (a) (ii)) | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced centre inner sill (7.1.1 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected chassis (5.3.6 (a) (ii)) | 1 |
| Offside Front Shock absorbers has a serious fluid leak | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Out rigger x2 (5.3.6 (a) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Sill (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Jacking point (5.3.6 (a) (i)) | 1 |
| Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i)) | 1 |
| Stop lamp(s) all not working (4.3.1 (a) (iii)) | 1 |
| Offside Front Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced ARCH (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i)) | 1 |
| Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL BEHIND LEAF SPRING (5.3.6 (a) (i)) | 1 |
| Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength SILL BEHIND LEAF SPRING (5.3.6 (a) (i)) | 1 |
| Offside Rear Outer Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced SILL (6.1.1 (c) (i)) | 1 |
| Horn sound not in accordance with requirements (7.7 (c)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill , before wheel arch , marked (5.3.6 (a) (i)) | 1 |
| Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill to rear of wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner sill to rear of wheel arch (5.3.6 (a) (i)) | 1 |