MOT History from tests of petrol FIAT DUCATOs year 1998

Review the list of common FIAT DUCATO failures below or to perform a specific mot history check on your FIAT then use our popular KnowYourCar service

mot history

Pass percent:50.38%

(The average a petrol FIAT DUCATO year 1998 passes without issue)

Based on:663 MOT Tests

Most common failures	No# failures
Brake pipe excessively corroded	77
Windscreen wiper does not clear the windscreen effectively	59
Headlamp aim out of alignment	44
Exhaust emissions carbon monoxide content after 2nd fast idle excessive \|7.3.D.3\|	21
Brakes imbalanced across an axle	19
Registration plate lamp issues	18
Horn not working \|1.6.2a\|	16
Offside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	16
Nearside Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	14
Exhaust emissions Lambda reading after 2nd fast idle outside specified limits \|7.3.D.3\|	13
Rear brake binding	13
Exhaust emissions carbon monoxide content at idle excessive \|7.3.D.4\|	8
Brake hose excessively deteriorated	8
Battery insecure \|1.9.1\|	7
Nearside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	7
Offside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	7
Exhaust emissions hydrocarbon content after 2nd fast idle excessive \|7.3.D.3\|	6
Nearside Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	6
Exhaust has a major leak of exhaust gases \|7.1.2\|	6
Nearside Headlamp not working on dipped beam \|1.7.5a\|	6
Front brake disc in such a condition that it is seriously weakened	6
Offside Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	5
Rear brake application uneven	5
Offside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	5
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	5
Emissions not tested \|7.0\|	5
Front Exhaust has a major leak of exhaust gases \|7.1.2\|	5
Nearside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	5
Offside Front Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	5
Exhaust Lambda reading after 2nd fast idle outside specified limits \|8.2.1.2 \|c\|\|	5
Nearside Stop lamp not working \|1.2.1b\|	5
Nearside Front Direction indicator incorrect colour \|1.4.A.2f\|	5
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits \|8.2.1.2 \|b\|\|	5
Exhaust system not adequately supported \|7.1.1\|	5
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	5
Nearside Rear wheel bearing has excessive play \|2.6.2\|	5
Offside Rear wheel bearing has excessive play \|2.6.2\|	5
Horn not working (7.7 (a) (ii))	5
Exhaust Lambda reading after 2nd fast idle outside specified limits (8.2.1.2 (c))	5
Horn not working (7.7 (a))	5
Parking brake: efficiency below requirements \|3.7.B.7\|	4
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	4
Registration plate issues	4
Windscreen washer not working	4
Offside Stop lamp not working \|1.2.1b\|	4
Nearside Rear Shock absorber has a serious fluid leak \|2.7.3\|	4
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	4
Offside Headlamp not working on main beam \|1.7.5a\|	4
Nearside Rear Direction indicator incorrect colour \|1.4.A.2f\|	4
Offside Rear Service brake excessively binding (1.2.1 (f))	4
Exhaust carbon monoxide content after 2nd fast idle exceeds default limits (8.2.1.2 (b))	4
Front brake application uneven	3
Nearside Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	3
Nearside Front Headlamp not working on dipped beam \|1.7.5a\|	3
Offside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	3
Service brake: efficiency below requirements \|3.7.B.7\|	3
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	3
Exhaust emissions carbon monoxide content excessive \|7.3.B.1a\|	3
Nearside Front Direction indicator not working \|1.4.A.2c\|	3
Nearside front brake binding \|3.7.B.1\|	3
Nearside Front Front wheel bearing has excessive play \|2.5.A.3c\|	3
Nearside Headlamp not working on main beam \|1.7.5a\|	3
Offside Rear fog lamp not working \|1.3.2b\|	3
Nearside Front Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	3
Offside Front Direction indicator incorrect colour \|1.4.A.2f\|	3
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits \|8.2.1.2 \|b\|\|	3
Exhaust carbon monoxide content at idle exceeds default limits \|8.2.1.2 \|b\|\|	3
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturer`s specified limits \|8.2.1.2 \|a\|\|	3
Offside Front Shock absorbers has a serious fluid leak	3
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	3
Direction indicators incorrect colour \|1.4.A.2f\|	3
Offside Front position lamp\|s\| not working \|1.1.A.3b\|	3
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill \|6.1.B.2\|	3
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings outer sill \|6.1.B.2\|	3
Offside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	3
Offside Rear Direction indicator incorrect colour \|1.4.A.2f\|	3
Centre Exhaust system not adequately supported \|7.1.1\|	3
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	3
Offside Front Direction indicator not working (4.4.1 (a) (ii))	3
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	3
Nearside Front Service brake excessively binding (1.2.1 (f))	3
Headlamp levelling device inoperative (4.1.5 (a))	3
Offside Stop lamp(s) not working (4.3.1 (a) (ii))	3
Offside Rear fog lamp not working (4.5.1 (a) (ii))	3
Exhaust carbon monoxide content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a))	3
Offside Rear Stop lamp not working \|1.2.1b\|	2
Offside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	2
Nearside Rear wheel bearing rough when rotated \|2.6.1\|	2
Offside Rear wheel bearing rough when rotated \|2.6.1\|	2
Offside Front Headlamp not working on dipped beam \|1.7.5a\|	2
Nearside Front Headlamp excessively deteriorated so that the light output is severely reduced \|1.7.5a\|	2
Rear parking brake recording little or no effort	2
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	2
Brake performance not tested \|3.7.A.1\|	2
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	2
Offside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc \|2.5.C.1a\|	2
Nearside Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	2
Rear Exhaust system not adequately supported \|7.1.1\|	2
Offside Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Offside Windscreen wiper blade deteriorated \|8.2.2\|	2
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill \|5.3.6 \|a\| \|i\|\|	2
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill \|5.3.6 \|a\| \|i\|\|	2
Emissions not tested \|7.3.A.1\|	2
Nearside Side repeater not working \|1.4.A.2c\|	2
Brake pedal spongy \|3.3.B.1b\|	2
Front Engine mounting missing \|6.1.8 \|a\| \|ii\|\|	2
Nearside Front Service brake excessively binding \|1.2.1 \|f\|\|	2
Offside Front Track rod end ball joint has excessive play \|2.2.B.1f\|	2
Horn not working \|7.7 \|a\| \|ii\|\|	2
Nearside Front Suspension component mounting prescribed area is excessively corroded jacking point \|2.4.A.3\|	2
Offside Front Suspension component mounting prescribed area is excessively corroded jacking point \|2.4.A.3\|	2
Offside Front Front wheel bearing has excessive play \|2.5.A.3c\|	2
Horn not loud enough to be heard by another road user \|1.6.2b\|	2
Rear Direction indicators incorrect colour \|1.4.A.2f\|	2
Power steering pipe\|s\| or hose\|s\| leaking \|2.3.3b\|	2
Nearside Front Headlamp not working on main beam \|1.7.5a\|	2
Nearside Outer Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Headlamp levelling device inoperative \|4.1.5 \|a\|\|	2
Offside Obligatory mirror seriously damaged, affecting the rear view \|8.1.2a\|	2
Offside Front Steering rack gaiter split \|2.2.D.2d\|	2
Nearside Front position lamp\|s\| not working \|1.1.A.3b\|	2
Offside Front Upper Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Offside Rear Shock absorber has a serious fluid leak \|2.7.3\|	2
Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	2
Offside front brake binding \|3.7.B.1\|	2
Nearside Track rod end ball joint has excessive play \|2.2.B.1f\|	2
Brake load sensing valve seized \|3.6.E.3\|	2
Nearside Front wheel bearing has excessive play \|2.5.A.3c\|	2
Offside Front wheel bearing has excessive play \|2.5.A.3c\|	2
Nearside Front Front suspension has excessive play in a lower suspension ball joint \|2.5.B.1a\|	2
Centre Seat belt locking mechanism does not secure or release \|5.2.5a\|	2
Nearside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	2
Front Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	2
Nearside Front brake caliper has restricted free movement \|3.5.1k\|	2
Rear Exhaust has a major leak of exhaust gases (6.1.2 (a))	2
Nearside Rear Direction indicator incorrect colour (4.4.3 (a))	2
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	2
Offside Front Service brake excessively binding (1.2.1 (f))	2
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii))	2
Nearside Front Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))	2
Emissions not tested (8.2.1.2 (d))	2
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))	2
Offside Side repeater not working (4.4.1 (a) (ii))	2
Offside Rear Position lamp not working (4.2.1 (a) (ii))	2
Nearside Rear Stop lamp(s) not working (4.3.1 (a) (ii))	2
Offside Rear Stop lamp(s) not working (4.3.1 (a) (ii))	2
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))	2
Nearside Front Headlamp not working on main beam (4.1.1 (a) (ii))	2
Exhaust carbon monoxide content at idle exceeds manufacturers specified limits (8.2.1.2 (b))	2
Central Exhaust system insecure rubbers missing (6.1.2 (a))	2
Nearside Front Position lamp not working (4.2.1 (a) (ii))	2
Nearside Front Wheel bearing rough when rotated (5.1.3 (b) (i))	2
Battery insecure and likely to fall from carrier (4.13 (a) (ii))	2
Nearside Rear Service brake excessively binding (1.2.1 (f))	2
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))	2
Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i))	2
Parking brake efficiency below requirements (1.4.2 (a) (i))	2
Stop lamp(s) all not working (4.3.1 (a) (iii))	2
Hazard warning lamps inoperative (4.4.1 (e))	2
Parking brake lever has excessive movement indicating incorrect adjustment \|1.1.6 \|c\|\|	1
Nearside Front Headlamp not working on dipped beam aim not tested \|1.7.5a\|	1
Offside Front Outer Front constant velocity joint is insecure \|2.5.C.1b\|	1
Power steering malfunctioning \|2.3.3a\|	1
front brakes release unevenly \|3.7.B.4\|	1
rear brakes release unevenly \|3.7.B.4\|	1
Offside Side repeater not working \|1.4.A.2c\|	1
Centre Rear Parking brake mechanism/associated mounting prescribed area is excessively corroded \|3.1.9\|	1
Nearside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Driver`s seat insecure \|6.2.A.1\|	1
Offside Front Headlamp excessively deteriorated so that the light output is severely reduced \|1.7.5a\|	1
Front Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Exhaust emissions hydrocarbon content excessive \|7.3.B.1b\|	1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1
Offside Front Vehicle structure has an inadequate repair which adversely affects braking or steering \|6.1.A.1\|	1
Nearside Front Vehicle structure has an inadequate repair which adversely affects braking or steering \|6.1.A.1\|	1
Nearside Rear Seat belt damaged sufficient to obstruct correct operation of the belt \|5.2.2a\|	1
Offside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Rear Brake pipe inadequately supported \|3.6.B.1\|	1
Offside Front Ball joint has excessive play \|2.2.B.1f\|	1
Nearside Front Track rod end damaged and unserviceable \|2.2.C.1d\|	1
Offside Rear Rear wheel bearing has excessive play \|2.6.2\|	1
Nearside Headlamp aim beam image kick up to the offside \|1.8\|	1
Nearside Windscreen wiper not operating over a large enough area to give an adequate view \|8.2.1c\|	1
Offside Headlamp excessively deteriorated so that the light output is severely reduced \|1.7.5a\|	1
Nearside Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc \|2.5.C.1a\|	1
Fuel cap/sealing device missing \|7.2.4a\|	1
Nearside Windscreen wiper blade missing \|8.2.2\|	1
Nearside Front Direction indicator excessively damaged so that it is not visible from a reasonable distance \|1.4.A.2e\|	1
Nearside Direction indicators not working \|1.4.A.2c\|	1
Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` \|8.3.1e\|	1
Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Headlamp insecure \|1.7.3\|	1
Towbar mounting obviously of an inappropriate size \|6.6.2\|	1
Horn control insecure \|1.6.1\|	1
Nearside Rear Direction indicator adversely affected by the operation of another lamp \|1.4.A.2h\|	1
Nearside Rear Rear position lamp\|s\| adversely affected by the operation of another lamp \|1.1.A.3f\|	1
Nearside Rear Stop lamp adversely affected by the operation of another lamp \|1.2.1f\|	1
Nearside Headlamp not in good working order adversely affecting beam image \|1.2.4a\|	1
Nearside Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Brake pipe inadequately supported \|3.6.B.1\|	1
Brake load sensing valve linkage seized \|3.6.E.3\|	1
Windscreen wiper blade insecure	1
Nearside Outer Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc \|2.5.C.1a\|	1
Rear Brake hose leaking \|3.6.A.1\|	1
Rear Exhaust mounting missing \|7.1.1b\|	1
Offside Front Brake pipe inadequately clipped \|3.6.B.1\|	1
Offside Rear Rear fog lamp not working \|1.3.2b\|	1
Front Service brake excessively binding \|1.2.1 \|f\|\|	1
Nearside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt \|6.1.7 \|g\| \|ii\|\|	1
Offside Rear Service brake excessively binding \|1.2.1 \|f\|\|	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength \|5.3.6 \|a\| \|i\|\|	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength \|5.3.6 \|a\| \|i\|\|	1
Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill \|7.1.1 \|a\| \|i\|\|	1
Windscreen wiper not working \|3.4 \|a\|\|	1
Power steering pipe\|s\| or hose\|s\| excessively corroded \|2.3.2\|	1
Offside Front Lower Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Lower Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Inner Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc \|2.5.C.1a\|	1
Nearside Front Suspension arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Front Suspension arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Offside Rear fog lamp not working \|4.5.1 \|a\| \|ii\|\|	1
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt \|5.3.4 \|b\| \|ii\|\|	1
Offside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt \|5.3.4 \|b\| \|ii\|\|	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing \|5.3.6 \|a\| \|i\|\|	1
Nearside Front Suspension component mounting prescribed area is inadequately repaired inner wing \|5.3.6 \|a\| \|i\|\|	1
Brake valve leaking \|3.6.A.1\|	1
Offside Front engine mounting bracket insecure and likely to fail \|6.1.D.1b\|	1
Suspension component mounting prescribed area is excessively corroded inner sill \|2.4.A.3\|	1
Suspension component mounting prescribed area is excessively corroded front floor area \|2.4.A.3\|	1
Suspension component mounting prescribed area is excessively corroded n/s inner wheel arch \|2.4.A.3\|	1
Offside Front Side repeater not working \|1.4.A.2c\|	1
Offside Rear Stop lamp emits other than a steady red light \|1.2.1e\|	1
Front passenger seat insecure \|6.2.3\|	1
Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength os sill 30cms within leaf spring mount \|5.3.6 \|a\| \|i\|\|	1
Nearside Rear Rear wheel bearing rough when rotated \|2.6.1\|	1
Nearside Rear Seat belt anchorage prescribed area is excessively corroded \|5.2.6\|	1
Nearside Rear Service brake excessively binding \|1.2.1 \|f\|\|	1
Emissions not tested due to engine overheating. was failing on co, hc and lambda \|8.2.1.2 \|d\|\|	1
Bonnet cannot be secured in the closed position \|3.1 \|b\| \|i\|\|	1
Nearside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill \|5.3.6 \|a\| \|i\|\|	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis \|5.3.6 \|a\| \|i\|\|	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail at front subframe mounts \|5.3.6 \|a\| \|i\|\|	1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis rail at front subframe mounts \|5.3.6 \|a\| \|i\|\|	1
Nearside Rear Inner Suspension component mounting prescribed area is inadequately repaired sill \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch at rear \|5.3.6 \|a\| \|i\|\|	1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch at rear \|5.3.6 \|a\| \|i\|\|	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis crossmember at shackle mount \|5.3.6 \|a\| \|i\|\|	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength valance/back panel at shackle mount \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch at rear \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch at rear \|shock mount\| \|5.3.6 \|a\| \|i\|\|	1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wheel arch at rear \|shock mount\| \|5.3.6 \|a\| \|i\|\|	1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch \|5.3.6 \|a\| \|i\|\|	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch \|5.3.6 \|a\| \|i\|\|	1
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch \|5.3.6 \|a\| \|i\|\|	1
Offside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch \|2.4.A.3\|	1
Offside Rear Suspension spring mounting prescribed area is excessively corroded outer sill \|2.4.A.3\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded outer sill \|2.4.A.3\|	1
Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill , spring front mount \|2.4.A.3\|	1
Offside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill ,spring rear mount \|2.4.A.3\|	1
Suspension spring mounting prescribed area is excessively corroded rear cross member \|2.4.A.3\|	1
Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill , spring front mount \|2.4.A.3\|	1
Nearside Rear Inner Suspension spring mounting prescribed area is excessively corroded sill , spring rear mount \|2.4.A.3\|	1
Offside Front Subframe mounting prescribed area is excessively corroded chassis rail x2 \|2.4.A.3\|	1
Offside Front Seat belt anchorage prescribed area is excessively corroded under step \|5.2.6\|	1
Exhaust emissions carbon monoxide content after 2nd fast idle excessive .381 \|7.3.D.3\|	1
Offside Headlamp aim beam image obviously incorrect \|1.8.A.1b\|	1
Nearside Front Upper Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Lower Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Direction indicators incorrect colour \|1.4.A.2f\|	1
Offside Rear Direction indicators incorrect colour \|1.4.A.2f\|	1
Nearside Front Lower Brake hose bulging under pressure \|3.6.B.3\|	1
Nearside Rear rear brake grabbing severely \|3.7.A.5b\|	1
Offside Rear Position lamp not working \|4.2.1 \|a\|\|	1
Offside Rear Direction indicator not working \|4.4.1 \|a\| \|ii\|\|	1
Offside Rear Rear fog lamp not working \|4.5.1 \|a\| \|ii\|\|	1
Spare wheel insecure adjusted. \|6.4.2\|	1
Offside Front Direction indicator not working \|4.4.1 \|a\| \|ii\|\|	1
Nearside Front Brake hose excessively twisted hoses rubbing each other \|1.1.12 \|b\| \|ii\|\|	1
Offside Front Windscreen wiper blade missing \|3.4 \|b\| \|ii\|\|	1
Nearside Rear Shock absorbers has a serious fluid leak	1
Offside Rear Shock absorbers has a serious fluid leak	1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength \|5.3.6 \|a\| \|i\|\|	1
rear brake recording little or no effort \|3.7.B.5a\|	1
Nearside Outer Front constant velocity joint gaiter split \|2.5.C.1a\|	1
Nearside Front brake disc excessively pitted \|3.5.1h\|	1
Offside Front brake disc excessively pitted \|3.5.1h\|	1
Offside Rear Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside Front Front position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Front Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Mechanical brake component has restricted free movement	1
Lower Steering column universal joint has excessive play \|2.1.5\|	1
Brake valve leaking load sensing valve \|3.6.A.1\|	1
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturer`s specified limits \|8.2.1.2 \|a\|\|	1
Nearside Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Front Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill \|6.1.B.2\|	1
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings Step \|6.1.B.2\|	1
Nearside Front Vehicle structure has excessive corrosion which adversely affects braking or steering By step. \|6.1.A.1\|	1
Nearside Front Seat belt attachment fitting badly deteriorated \|5.2.3\|	1
Rear Side repeater not working \|1.4.A.2c\|	1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill \|5.3.6 \|a\| \|i\|\|	1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter/sill \|5.3.6 \|a\| \|i\|\|	1
Nearside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength quarter/sill area \|5.3.6 \|a\| \|i\|\|	1
Offside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill corroded \|7.1.1 \|a\| \|i\|\|	1
Offside Outer Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill rusted out \|6.1.B.2\|	1
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill rusted badly \|6.1.B.2\|	1
Offside Rear Upper Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt \|2.1.3 \|g\| \|ii\|\|	1
Offside Rear Suspension spring mounting prescribed area excessively corroded significantly reducing structural strength outer sill corroded \|5.3.6 \|a\| \|i\|\|	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch corroded \|5.3.6 \|a\| \|i\|\|	1
Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength next to engine mounting \|5.3.6 \|a\| \|i\|\|	1
Offside Front Upper Suspension component mounting prescribed area is excessively corroded brake pipe mounting area \|2.4.A.3\|	1
Nearside Steering rack gaiter split \|2.2.D.2d\|	1
Offside Steering rack gaiter split \|2.2.D.2d\|	1
Nearside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc \|2.5.C.1a\|	1
Offside Outer Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc \|2.5.C.1a\|	1
Front Direction indicators incorrect colour \|1.4.A.2f\|	1
Nearside Front Electrical wiring inadequately supported \|1.9.2a\|	1
Nearside Front Side repeater not working \|1.4.A.2c\|	1
Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Rear Exhaust has part of the system excessively deteriorated \|7.1.1a\|	1
Brake slack adjuster seized \|1.1.18 \|a\|\|	1
Offside Front front brake binding \|3.7.B.1\|	1
Emissions not tested oil leak and overheating \|8.2.1.2 \|d\|\|	1
Oil leaking excessively from engine \|8.4.1 \|a\| \|i\|\|	1
Fuel cap/sealing device ineffective \|6.1.3 \|b\| \|i\|\|	1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point area \|5.3.6 \|a\| \|i\|\|	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point area \|5.3.6 \|a\| \|i\|\|	1
Nearside Rear Wheel bearing rough when rotated \|5.1.3 \|b\| \|i\|\|	1
Offside Front Upper Brake pipe inadequately supported \|3.6.B.1\|	1
Exhaust system not adequately supported X3 centre rubber missing \|7.1.1\|	1
Nearside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill \|6.1.B.2\|	1
Offside Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill \|6.1.B.2\|	1
Nearside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill \|6.1.B.2\|	1
Offside Rear Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings sill \|6.1.B.2\|	1
Nearside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Hazard warning switch missing \|1.4.B.1d\|	1
Offside Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Obligatory mirror seriously damaged, affecting the rear view \|8.1.2a\|	1
Nearside Upper Rear position lamp\|s\| excessively deteriorated so that it is not visible from a reasonable distance \|1.1.A.3d\|	1
Nearside Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Nearside Front front brake juddering severely \|3.7.A.2b\|	1
Offside Front front brake juddering severely \|3.7.A.2b\|	1
Nearside Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Rear Brake load sensing valve linkage seized \|3.6.E.3\|	1
Brake master cylinder/servo mounting prescribed area is excessively corroded \|3.6.C.3\|	1
Front Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1
Nearside Windscreen wiper not operating automatically when switched on \|8.2.1b\|	1
Offside Windscreen wiper not operating automatically when switched on \|8.2.1b\|	1
Nearside front brake juddering severely \|3.7.A.2b\|	1
Offside Rear Rear position lamp\|s\| excessively deteriorated so that it is not visible from a reasonable distance \|1.1.A.3d\|	1
Front brake disc excessively pitted \|3.5.1h\|	1
Braking system leaking \|3.6.A.1\|	1
Brake pedal creeps down when held under pressure \|3.3.B.1a\|	1
Offside Rear reflector missing \|1.5.1a\|	1
Nearside Rear Shock absorber has negligible damping effect \|2.7.5\|	1
Offside Rear Shock absorber has negligible damping effect \|2.7.5\|	1
Nearside Front Lower Subframe mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Front Suspension arm has excessive play in a ball joint \|2.4.G.2\|	1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings n/s/f and rear inner sill and outriggers \|6.1.B.2\|	1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings o/s/r inner sill and outriggers \|6.1.B.2\|	1
Offside Front Direction indicator not working \|1.4.A.2c\|	1
Nearside Windscreen wiper blade deteriorated \|8.2.2\|	1
Nearside Headlamp aim aimed so that it dazzles other road users \|1.8.A.1a\|	1
Offside Rear Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area \|6.1.B.2\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill area \|6.1.B.2\|	1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings floor area \|6.1.B.2\|	1
Nearside Front Suspension spring mounting prescribed area is excessively corroded under arch area \|2.4.A.3\|	1
Windscreen wiper not operating automatically when switched on \|8.2.1b\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded outer sill \|2.4.A.3\|	1
Nearside Rear Suspension component mounting prescribed area is excessively corroded inner sill \|2.4.A.3\|	1
Rear Suspension component mounting prescribed area is excessively corroded cross member \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is excessively corroded inner sill \|2.4.A.3\|	1
Offside Rear Suspension component mounting prescribed area is inadequately repaired inner sill in front of wheel \|2.4.A.3\|	1
Offside Front Upper Suspension component mounting prescribed area is excessively corroded inner arch \|2.4.A.3\|	1
Offside Front Lower Suspension component mounting prescribed area is excessively corroded inner arch \|2.4.A.3\|	1
Nearside Front Upper Suspension component mounting prescribed area is excessively corroded inner arch \|2.4.A.3\|	1
Nearside Front Lower Suspension component mounting prescribed area is excessively corroded inner arch \|2.4.A.3\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded rear inner arch \|2.4.A.3\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded chassis box section \|2.4.A.3\|	1
Nearside Front Suspension component mounting prescribed area is excessively corroded step area \|2.4.A.3\|	1
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings middle inner sill x2 \|6.1.B.2\|	1
Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis box section \|6.1.B.2\|	1
Rear Braking system leaking pipes \|3.6.A.1\|	1
Rear brake excessively fluctuating	1
Offside Front Macpherson strut worn and seriously weakened \|2.4.G.1\|	1
Nearside Front Macpherson strut worn and seriously weakened \|2.4.G.1\|	1
Nearside Front Front suspension has excessive movement at a wishbone pin or bush rear bush \|2.5.A.1c\|	1
Offside Front Front suspension has serious deterioration of the bonding between metal and flexible material of an upper support bearing rear bush \|2.5.B.3a\|	1
Front Anti-roll bar linkage rubber bush deteriorated resulting in excessive movement both \|2.4.G.2\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded cross member \|2.4.A.3\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded outriggar next to swinging shackle \|2.4.A.3\|	1
Front Vehicle structure has an unsatisfactory modification, seriously affecting its strength within 30cm of the body mountings \|6.1.B.2\|	1
Offside Track rod end ball joint has excessive play \|2.2.B.1f\|	1
Offside Suspension has inadequate clearance with the bump stop \|2.4.A.1a\|	1
Nearside Suspension has inadequate clearance with the bump stop \|2.4.A.1a\|	1
Outer Rear Lower Exhaust has part of the system excessively deteriorated \|7.1.1a\|	1
Nearside Front Obligatory mirror insecure \|8.1.1\|	1
Offside Front Body insecure and dangerous to other road users wheel arch liner \|6.1.B.1b\|	1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings chassis leg \|6.1.B.2\|	1
Centre Rear Brake linkage locking device insecure safety clip broken on axle to proportioning valve mech \|3.5.1l\|	1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner sill within 12" of rear shackle \|6.1.A.1\|	1
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering quater panel corrosion within 12" of rear shackle \|6.1.A.1\|	1
Offside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering outer sill corrosion within 12" of rear spring \|6.1.A.1\|	1
Nearside Rear Body has a sharp edge caused by corrosion wheel arch \|6.1.C.1\|	1
Centre Exhaust system not adequately supported rubber mount missing from centre box \|7.1.1\|	1
Nearside Rear Vehicle structure has excessive corrosion which adversely affects braking or steering inner quarter panel corrosion \|6.1.A.1\|	1
Offside Front Front suspension has excessive play in a lower suspension ball joint \|2.5.B.1a\|	1
Front front parking \|secondary\| brakes imbalanced \|3.7.B.6b\|	1
Nearside Front Upper Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Upper Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Lower Vehicle structure has excessive corrosion which adversely affects braking or steering \|6.1.A.1\|	1
Exhaust mounting missing \|7.1.1b\|	1
Nearside Front Wheel bearing has excessive play \|5.1.3 \|a\| \|i\|\|	1
Centre Exhaust has a major leak of exhaust gases \|7.1.2\|	1
Nearside Front Inner Subframe mounting prescribed area is excessively corroded sill \|2.4.A.3\|	1
Central Exhaust system not adequately supported \|7.1.1\|	1
Offside Rear Upper Rear position lamp\|s\| incorrect colour \|1.1.A.3e\|	1
Front Sub-frame corroded and seriously weakened \|5.3.3 \|b\| \|i\|\|	1
Hazard warning lamps inoperative \|1.4.B.1b\|	1
Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings offside jacking point \|6.1.B.2\|	1
Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings front jacking point \|6.1.B.2\|	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outer sill \|5.3.6 \|a\| \|i\|\|	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill \|5.3.6 \|a\| \|i\|\|	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill \|5.3.6 \|a\| \|i\|\|	1
Headlamp not working on dipped beam \|1.7.5a\|	1
Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Nearside Rear Leaf spring has excessive wear in a shackle pin and/or bush \|2.4.B.2\|	1
Offside Rear Body has a sharp edge caused by corrosion \|6.1.C.1\|	1
Offside Headlamp not working on dipped beam \|1.7.5a\|	1
Offside Brake master cylinder/servo mounting prescribed area is excessively corroded \|3.6.C.3\|	1
Offside Rear Rear wheel bearing rough when rotated \|2.6.1\|	1
Offside Headlamp not in good working order adversely affecting beam image \|1.2.4a\|	1
Nearside Headlamp aim not tested \|1.8.A.1c\|	1
Nearside Front Shock absorbers has a serious fluid leak	1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced engine mounting area \|6.1.1 \|c\| \|i\|\|	1
Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced engine mounting area \|6.1.1 \|c\| \|i\|\|	1
Driver`s seat fore and aft adjustment mechanism not functioning as intended. \|6.2.A.3\|	1
Hazard warning switch faulty \|1.4.B.1d\|	1
Offside Upper Rear position lamp\|s\| excessively deteriorated so that it is not visible from a reasonable distance \|1.1.A.3d\|	1
Nearside Front Lower Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Offside Front Lower Suspension arm has excessive play in a pin/bush \|2.4.G.2\|	1
Parking brake lever ratchet mechanism is excessively worn \|3.1.5\|	1
Offside Front Service brake excessively fluctuating \|1.2.1 \|e\|\|	1
Rear Brake load sensing valve inoperative \|3.6.E.3\|	1
Nearside Rear Suspension spring mounting prescribed area is excessively corroded @ front hangar \|2.4.A.3\|	1
Front Upper Suspension component mounting prescribed area is excessively corroded strut mountings at both sides holed and corroded \|2.4.A.3\|	1
Offside Battery insecure \|1.9.1\|	1
Nearside Rear Upper Rear position lamp\|s\| not working \|1.1.A.3b\|	1
Offside Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner sill \|6.1.B.2\|	1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing \|6.1.B.2\|	1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing \|6.1.B.2\|	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing \|6.1.B.2\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wing \|6.1.B.2\|	1
Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings out rigger \|6.1.B.2\|	1
Exhaust emissions hydrocarbon content after 2nd fast idle excessive not tested due to missfire \|7.3.D.3\|	1
Nearside Inner Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Outer Suspension component mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear spring front mounting area inner sill \|6.1.B.2\|	1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings within 30 cm of front subframe mounting \|6.1.B.2\|	1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings within 30cm of subframe mounting \|6.1.B.2\|	1
Nearside Rear Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings within 30cm of n/s rear spring front eye mount \|6.1.B.2\|	1
Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch \|6.1.B.2\|	1
Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings inner wheel arch \|6.1.B.2\|	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear spring front mounting \|6.1.B.2\|	1
Nearside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear spring rear mounting \|6.1.B.2\|	1
Offside Rear Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings rear spring rear mounting \|6.1.B.2\|	1
Nearside Rear Rear wheel bearing has excessive play \|2.6.2\|	1
Central Electrical wiring inadequately supported under water tank \|1.9.2a\|	1
Offside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc \|2.5.C.1a\|	1
Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt \|2.2.C.1c\|	1
Centre Rear Suspension spring mounting prescribed area is excessively corroded \|2.4.A.3\|	1
Offside Front Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc \|2.5.C.1a\|	1
Offside Rear Rear reflector missing \|1.5.1a\|	1
Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement \|2.4.G.2\|	1
Nearside Rear Brake pipe inadequately supported \|3.6.B.1\|	1
Front Sub-frame corroded and seriously weakened \|2.4.G.1\|	1
Electrical wiring inadequately supported underside of vehicle \|1.9.2a\|	1
Hazard warning lamps not flashing in phase, with ignition on \|1.4.B.1f\|	1
Hazard warning lamps not flashing in phase, with ignition off \|1.4.B.1f\|	1
Stop lamp not working \|1.2.1b\|	1
Nearside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch splitting and excessively corroded around jacking point area underfloor inner sills (6.2.2 (d) (i))	1
Offside Front Lower Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner wheel arch splitting and excessively corroded around jacking point area underfloor inner sills (6.2.2 (d) (i))	1
Bonnet cannot be secured in the closed position (3.1 (b) (i))	1
Offside Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Offside Headlamp not working on main beam (4.1.1 (a) (ii))	1
Power steering malfunctioning (2.1.5 (a))	1
Battery insecure and likely to cause a short circuit (4.13 (a) (ii))	1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i))	1
Offside Front Steering component mounting prescribed area is excessively corroded chassis rail (2.1.2 (e) (i))	1
Emissions not tested c02 levels way to high (8.2.1.2 (d))	1
Offside Rear Direction indicator incorrect colour (4.4.3 (a))	1
Offside Engine mounting bracket damaged or deteriorated resulting in excessive movement corroded and holed (6.1.8 (a) (i))	1
Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))	1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point (6.1.1 (c) (i))	1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced inner sill / floor (6.1.1 (c) (i))	1
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii))	1
Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Outer sill (6.2.2 (d) (i))	1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Inner sill front step (6.2.2 (d) (i))	1
Offside Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))	1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting inner sill (6.2.2 (d) (i))	1
Nearside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting quarter (6.2.2 (d) (i))	1
Offside Rear Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Quarter (6.2.2 (d) (i))	1
Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting sill step (6.2.2 (d) (i))	1
Offside Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected sill holed (5.3.6 (a) (ii))	1
Offside Front Wheel bearing has excessive play (5.1.3 (a) (i))	1
Offside Front Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))	1
Exhaust carbon monoxide content at idle exceeds default limits (8.2.1.2 (b))	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	1
Nearside Front Inner Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))	1
Nearside Front Service brake lagging in operation (1.2.1 (d))	1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i))	1
Exhaust emissions carbon monoxide content excessive (8.2.1.2 (b))	1
Nearside Rear Position lamp not working (4.2.1 (a) (ii))	1
Nearside Stop lamp(s) not working (4.3.1 (a) (ii))	1
Oil leaking excessively from engine (8.4.1 (a) (i))	1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))	1
Offside All direction indicators not working (4.4.1 (a) (ii))	1
Rear Service brake excessively fluctuating (1.2.1 (e))	1
Exhaust hydrocarbon content after 2nd fast idle exceeds default limits (8.2.1.2 (b))	1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength chassis / outrigger (5.3.6 (a) (i))	1
Exhaust emissions likely to be affected by an exhaust leak (8.2.2.1 (b))	1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point area (5.3.6 (a) (i))	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jacking point area (5.3.6 (a) (i))	1
Nearside Rear Leaf spring shackle bracket insecure (5.3.1 (a) (i))	1
Offside Rear Leaf spring shackle bracket insecure (5.3.1 (a) (i))	1
Offside Front Upper Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced engine mount area (6.1.1 (c) (i))	1
Offside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Offside Front Headlamp not working on main beam (4.1.1 (a) (ii))	1
Nearside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))	1
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Nearside Headlamp not working on main beam (4.1.1 (a) (ii))	1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength turret (5.3.6 (a) (i))	1
Nearside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength innerwing/chassis area (5.3.6 (a) (i))	1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength innerwing chassis area (5.3.6 (a) (i))	1
Offside Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill holed in 2 places (6.2.2 (d) (i))	1
Offside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill holed (6.2.2 (d) (i))	1
Nearside Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting sill holed (6.2.2 (d) (i))	1
Horn sound not in accordance with requirements (7.7 (c))	1
Nearside Rear Inner Position lamp not working (4.2.1 (a) (ii))	1
Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering OSF top chassis rail corroded under bonnet (6.1.1 (c) (ii))	1
Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Front crossmember disintigrated (6.1.1 (c) (i))	1
Exhaust system insecure exhaust mountings perrished (6.1.2 (a))	1
Exhaust system insecure 5 rubber mounts missing out of 7 (6.1.2 (a))	1
Front Direction indicator incorrect colour nearside & offside (4.4.3 (a))	1
Rear Direction indicator incorrect colour (4.4.3 (a))	1
Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking/outrigger (6.1.1 (c) (i))	1
Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking/outrigger (6.1.1 (c) (i))	1
Nearside Front Upper Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wheel arch / top turret (5.3.6 (a) (ii))	1
Offside Front Upper Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected inner wheel arch / top turret (5.3.6 (a) (ii))	1
Rear fog lamp not working (4.5.1 (a) (ii))	1
Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))	1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength outrigger (5.3.6 (a) (i))	1
Nearside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))	1
Offside Front Outer Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))	1
Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill (5.3.6 (a) (i))	1
Nearside Front Outer Seat belt anchorage prescribed area strength or continuity significantly reduced sill (7.1.1 (a) (i))	1
Emissions not tested due to exhaust (8.2.1.2 (d))	1
Nearside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))	1
Nearside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected jacking point (5.3.6 (a) (ii))	1
Offside Front Subframe mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected jacking point (5.3.6 (a) (ii))	1
Nearside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear mountings (5.3.6 (a) (ii))	1
Offside Rear Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected rear mountings (5.3.6 (a) (ii))	1
Offside Drivers seat with a defective structure step (6.2.5 (a) (i))	1
Offside Rear Service brake lagging in operation (1.2.1 (d))	1
Offside Front Brake insecure caliper carrier (1.1.21 (c))	1
Nearside Rear Wheel bearing rough when rotated (5.1.3 (b) (i))	1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))	1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced (7.1.1 (a) (i))	1
Nearside Front Wheel bearing has excessive play (5.1.3 (a) (i))	1
Front Service brake excessively binding (1.2.1 (f))	1
Nearside Rear Parking brake inoperative on one side (1.4.1 (a))	1
Exhaust hydrocarbon content after 2nd fast idle exceeds manufacturers specified limits (8.2.1.2 (a))	1
Nearside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill front to rear (6.1.1 (c) (i))	1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced outer sill front to rear (6.1.1 (c) (i))	1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced out rigger marked with chalk (6.1.1 (c) (i))	1
Offside Rear Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced around rear spring hanger marked with chalk (6.1.1 (c) (i))	1
Exhaust system insecure (6.1.2 (a))	1
Central Exhaust has a major leak of exhaust gases (6.1.2 (a))	1
Nearside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))	1
Offside Front Upper Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i))	1
Offside Front Inner Track rod end ball joint has excessive play (2.1.3 (b) (i))	1
Emissions unable to be completed excessive exhaust blow (8.2.1.2 (d))	1
Nearside Front All direction indicators not working front and side (4.4.1 (a) (ii))	1
Front Headlamp aim projected beam image is obviously incorrect both sides fitted with left hand drive lamps (4.1.2 (c))	1
Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced within 30cm of front subframe behind o/s/f wheel (6.1.1 (c) (i))	1
Offside Outer Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting SILL HOLED (6.2.2 (d) (i))	1
Nearside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting SILL HOLED (6.2.2 (d) (i))	1
Offside Rear Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting SILL HOLED (6.2.2 (d) (i))	1
Offside Front Inner Cab or chassis has excessive corrosion, seriously affecting its strength within 30cm of a cab mounting WING HOLED IN 3 PLACES (6.2.2 (d) (i))	1
Rear Exhaust has a major leak of exhaust gases SECTION HOLED (6.1.2 (a))	1
Headlamp aim projected beam image is obviously incorrect Both front headlights are left hand drive lights (4.1.2 (c))	1
Nearside Front Direction indicator not working (4.4.1 (a) (ii))	1
Offside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting Chassis leg (6.2.2 (d) (i))	1
Offside Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Sill (6.1.1 (c) (i))	1
Offside Rear Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))	1
Nearside Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))	1
Nearside Front Lower Suspension arm ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii))	1
Windscreen wiper not working (3.4 (a))	1
Nearside Drivers view of the road through the swept area of the windscreen significantly affected by an obstruction (3.1 (a) (ii))	1
Emissions unable to be completed (8.2.1.2 (d))	1
Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i))	1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced floor pan (7.1.1 (a) (i))	1
Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing (5.3.6 (a) (i))	1
Hazard warning switch inoperative (4.4.2 (a) (ii))	1
Offside Headlamp aim projected beam image is obviously incorrect (4.1.2 (c))	1
Fuel cap/sealing device ineffective (6.1.3 (b) (i))	1
Rear Seat belt missing both buckles (7.1.2 (a))	1
Power steering malfunctioning noisy (2.1.5 (a))	1
Power steering pipe/hose leaking (2.1.5 (a))	1
Nearside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back panel rotten (5.3.6 (a) (i))	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength back panel (5.3.6 (a) (i))	1
Offside Rear Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength sill panel/box section (5.3.6 (a) (i))	1
Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i))	1
Brake performance unable to be tested (1.2.1 (g))	1
Brake pedal has insufficient reserve travel goes to the floor (1.1.2 (a))	1
Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Inner arch (6.1.1 (c) (i))	1
Windscreen washer jets misaligned and not providing sufficient fluid to the windscreen too high (3.5 (a))	1
Exhaust emissions likely to be affected by an exhaust leak front of middle silencer and pipe holed (8.2.1.1 (b))	1
Exhaust Lambda reading after 2nd fast idle outside specified limits 1.046 (8.2.1.2 (c))	1
Offside Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (c))	1
Offside Rear fog lamp adversely affected by the operation of another lamp (4.5.4 (b))	1
Nearside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))	1
Offside Track rod end ball joint dust cover insecure so that it no longer prevents the ingress of dirt (2.1.3 (g) (ii))	1
Offside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength rear wheel arch (5.3.6 (a) (i))	1
Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength wheel arch (5.3.6 (a) (i))	1
Rear Brake pipe connection leaking on a hydraulic braking system (1.1.11 (b) (ii))	1
Nearside Front Headlamp aim unable to be tested (4.1.2 (b))	1
Nearside Front Headlamp not working on dipped beam (4.1.1 (a) (ii))	1
Nearside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))	1
Offside Front Suspension arm ball joint excessively worn (5.3.4 (a) (i))	1
Offside Front Vehicle structure is fractured and structural rigidity is significantly reduced (6.1.1 (a) (i))	1
Nearside Front Vehicle structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting (6.2.2 (d) (i))	1
Nearside Vehicle structure is fractured and structural rigidity is significantly reduced inner sill (6.1.1 (a) (i))	1
Exhaust has a major leak of exhaust gases (6.1.2 (a))	1
Emissions unable to be completed due to exhaust blow (8.2.1.2 (d))	1
Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner step (7.1.1 (a) (i))	1
Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i))	1
Offside Front Direction indicator incorrect colour (4.4.3 (a))	1
Offside Rear Brake cable damaged (1.1.15 (a))	1
Offside Front Service brake excessively fluctuating (1.2.1 (e))	1
Offside Front Prop shaft joint constant velocity boot no longer prevents the ingress of dirt (6.1.7 (g) (ii))	1
Nearside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sills (6.1.1 (c) (i))	1
Nearside Rear Brake cable damaged (1.1.15 (a))	1
Nearside Front Service brake excessively fluctuating (1.2.1 (e))	1
Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength cross member (5.3.6 (a) (i))	1
Offside Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner and outer sills (6.1.1 (c) (i))	1
Front Integral body structure has excessive corrosion which adversely affects braking or steering cross member (6.1.1 (c) (ii))	1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

MOT History from tests of petrol FIAT DUCATOs year 1998

Find us on Facebook