>

MOT History from tests of petrol FIAT DUCATOs year 1983

Review the list of common FIAT DUCATO failures below or to perform a specific mot history check on your FIAT then use our popular KnowYourCar service

mot history
Pass percent:56.25%
(The average a petrol FIAT DUCATO year 1983 passes without issue)
Based on:64 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment7
Registration plate lamp issues5
Windscreen wiper does not clear the windscreen effectively5
Registration plate issues4
Nearside Stop lamp not working |1.2.1b|3
Front brake disc in such a condition that it is seriously weakened3
Offside Steering rack gaiter split |2.2.D.2d|3
Offside Front position lamp|s| not working |1.1.A.3b|3
Parking brake: efficiency below requirements |3.7.B.7|2
Offside Front Windscreen wiper blade deteriorated |8.2.2|2
Nearside Rear Direction indicator incomplete |1.5.A1b|2
Exhaust has a major leak of exhaust gases |7.1.2|2
Exhaust emissions hydrocarbon content excessive |7.3.B.1b|2
Service brake: efficiency below requirements |3.7.B.7|2
Battery insecure |1.9.1|2
Nearside Front Windscreen wiper blade deteriorated |8.2.2|2
Rear Mechanical brake component has restricted free movement2
Rear brake binding2
Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|2
Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Brake hose excessively deteriorated2
Offside Headlamp not working on dipped beam |1.7.5a|2
Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|2
Nearside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a|1
Rear Brake hose excessively damaged |3.6.B.4d|1
Horn not loud enough to be heard by another road user |1.6.2b|1
Nearside Upper Front position lamp|s| not working |1.1.A.3b|1
Nearside Front position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f|1
Nearside Indicator tell tale inoperative |1.4.A.2a|1
Offside Side repeater not working |1.4.A.2c|1
Centre Exhaust mounting missing |7.1.1b|1
Offside Exhaust system not adequately supported |7.1.1|1
Brake performance not tested |3.7.A.1|1
Front Brake hose excessively damaged |3.6.B.4d|1
Offside Rear Brake pipe excessively chafed |3.6.B.2c|1
Exhaust system not adequately supported |7.1.1|1
Offside Front Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e|1
Nearside Body has a sharp edge caused by damage |6.1.C.1|1
Offside Body has a sharp edge caused by damage |6.1.C.1|1
Front Windscreen wiper not operating automatically when switched on |8.2.1b|1
Brake servo vacuum pipe collapsed |3.6.C.1b|1
Rear brake application uneven1
Nearside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2|1
Offside Front Inner Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings wheel arch |6.1.B.2|1
Indicator tell tale inoperative |1.4.A.2a|1
Nearside Direction indicator not working |1.4.A.2c|1
Front Exhaust system not adequately supported loose on clamp |7.1.1|1
Front position lamp|s| not working both sides |1.1.A.3b|1
Seat belt locking mechanism does not secure or release both fronts |5.2.5a|1
Fuel cap/sealing device sealing washer missing |7.2.4c|1
Nearside Front All position lamps not working |1.1.A.3b|1
Nearside Front Wheel bolt|s| loose |4.2.A.1e|1
All position lamps not working |1.1.A.3b|1
Nearside Side repeater not working |1.4.A.2c|1
Rear Brake load sensing valve linkage seized |3.6.E.3|1
Rear Brake load sensing valve seized |3.6.E.3|1
Rear Exhaust system not adequately supported |7.1.1|1
Nearside Inner Front constant velocity joint is excessively worn |2.5.C.1b|1
Offside Stop lamp not working |1.2.1b|1
Exhaust emissions carbon monoxide content excessive |7.3.B.1a|1
Emissions not tested |7.0|1
Nearside Track rod end ball joint has excessive play |2.2.B.1f|1
Offside Track rod end ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.2.C.1c|1
Offside Track rod end ball joint has excessive play |2.2.B.1f|1
Front Passenger`s seat insecure |6.2.A.1|1
Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Body has a sharp edge caused by corrosion |6.1.C.1|1
Nearside Front position lamp|s| not working |1.1.A.3b|1
Offside Headlamp not working on main beam |1.7.5a|1
Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2|1
Front brake excessively fluctuating1
Brakes imbalanced across an axle1
Nearside Headlamp not working on main beam |1.7.5a|1
Nearside Headlamp adversely affected by the operation of another lamp |1.7.5c|1
Headlamp insecure both |1.7.3|1
Front Exhaust has a major leak of exhaust gases down pipe |7.1.2|1
Nearside Outer Front constant velocity joint gaiter deteriorated to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a|1
Offside Headlamp has a product on the light source so that the light output is severely reduced |1.7.5a|1
Horn not working |1.6.2a|1
Offside Front constant velocity joint gaiter split |2.5.C.1a|1
Offside Front Front constant velocity joint gaiter split |2.5.C.1a|1
Offside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Front Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b|1
Offside Headlamp excessively damaged so that the light output is severely reduced |1.7.5a|1
Nearside Front Front position lamp|s| not working |1.1.A.3b|1
Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3|1
Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Offside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3|1
Oil leaking excessively from engine (8.4.1 (a) (i))1
Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength jack mount (5.3.6 (a) (i))1
Nearside Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii))1
Offside Body panel corroded and likely to cause injury front arch /step area (6.2.1 (a) (i))1

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy