| Most common failures | No# failures |
|---|
| Parking brake: efficiency below requirements |3.7.B.7| | 4 |
| Registration plate lamp issues | 3 |
| Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 3 |
| Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 3 |
| Horn not working |1.6.2a| | 3 |
| Nearside Stop lamp not working |1.2.1b| | 2 |
| Offside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Stop lamp not working |1.2.1b| | 2 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 2 |
| Offside Front Lower Suspension arm has excessive play in a pin/bush |2.4.G.2| | 2 |
| Nearside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is inadequately repaired |2.4.A.3| | 1 |
| Nearside Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Rear Upper Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Lower Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Offside Headlamp not working on main beam |1.7.5a| | 1 |
| Brake pipe excessively corroded | 1 |
| Headlamp aim out of alignment | 1 |
| Service brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Rear Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Headlamp not working on main beam |1.7.5a| | 1 |
| Nearside Headlamp aim not tested |1.8.A.1c| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 1 |
| Nearside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Brake hose excessively deteriorated | 1 |
| Offside Rear Statutory seat belt missing |5.1.1| | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Offside Rear Direction indicator not working |1.4.A.2c| | 1 |
| Offside Upper Stop lamp not working |1.2.1b| | 1 |
| Offside Rear fog lamp not working |1.3.2b| | 1 |
| Offside Rear position lamp|s| excessively deteriorated so that it is not visible from a reasonable distance |1.1.A.3d| | 1 |
| Offside Lower Stop lamp not working |1.2.1b| | 1 |
| Brake pipe inadequately supported |3.6.B.1| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |