| Most common failures | No# failures |
|---|
| Brake pipe excessively corroded | 44 |
| Headlamp aim out of alignment | 38 |
| Windscreen wiper does not clear the windscreen effectively | 35 |
| Service brake: efficiency below requirements |3.7.B.7| | 17 |
| Horn not working |1.6.2a| | 17 |
| Rear brake binding | 16 |
| Brakes imbalanced across an axle | 15 |
| Registration plate lamp issues | 13 |
| Parking brake: efficiency below requirements |3.7.B.7| | 9 |
| Offside Stop lamp not working |1.2.1b| | 8 |
| Horn not working (7.7 (a) (ii)) | 6 |
| Nearside Stop lamp not working |1.2.1b| | 5 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 5 |
| Rear parking brake recording little or no effort | 5 |
| Offside Front constant velocity joint gaiter split |2.5.C.1a| | 4 |
| Horn not working (7.7 (a)) | 4 |
| Brake hose excessively deteriorated | 4 |
| Offside Rear fog lamp not working |1.3.2b| | 4 |
| Windscreen washer not working | 4 |
| Nearside Front position lamp|s| not working |1.1.A.3b| | 4 |
| Nearside Headlamp aim beam image kick up to the offside |1.8| | 4 |
| Nearside Front Shock absorbers has a serious fluid leak | 3 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine |7.4.B.3b| | 3 |
| Hazard warning switch faulty |1.4.B.1d| | 3 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 3 |
| Nearside Front Shock absorber has a serious fluid leak |2.7.3| | 3 |
| Offside Front Shock absorber has a serious fluid leak |2.7.3| | 3 |
| Brake hose damaged | 3 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 3 |
| Offside Headlamp aim beam image kick up to the offside |1.8| | 3 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 3 |
| Front brake disc in such a condition that it is seriously weakened | 3 |
| Battery insecure |1.9.1| | 3 |
| Registration plate issues | 3 |
| Offside Rear Rear fog lamp not working |1.3.2b| | 3 |
| Hazard warning switch inoperative (4.4.2 (a) (ii)) | 2 |
| Rear Exhaust system insecure (6.1.2 (a)) | 2 |
| Oil leaking excessively from engine (8.4.1 (a) (i)) | 2 |
| Nearside Front Direction indicator incorrect colour |1.4.A.2f| | 2 |
| Offside Front Shock absorbers has a serious fluid leak | 2 |
| Direction indicators not working |1.4.A.2c| | 2 |
| Hazard warning lamps inoperative |1.4.B.1b| | 2 |
| Offside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 2 |
| Exhaust system not adequately supported |7.1.1| | 2 |
| Nearside Front brake disc excessively pitted |3.5.1h| | 2 |
| Offside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 2 |
| Rear fog lamp switch faulty |1.3.1a| | 2 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 2 |
| Centre Exhaust has a major leak of exhaust gases |7.1.2| | 2 |
| Nearside Front Front position lamp|s| not working |1.1.A.3b| | 2 |
| Rear Mechanical brake component has restricted free movement | 2 |
| Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 2 |
| Horn not a continuous or uniform sound |1.6.2e| | 2 |
| Offside Front Direction indicator incorrect colour |1.4.A.2f| | 2 |
| Fuel cap/sealing device does not fasten securely maintaining the sealing arrangement |7.2.4b| | 2 |
| Nearside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 2 |
| Offside Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 2 |
| Offside Rear Stop lamp not working |1.2.1b| | 2 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under bonnet (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength chassis under wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower inner sill (5.3.6 (a) (i)) | 1 |
| Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings (6.1.B.2) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel arch (5.3.6 (a) (i)) | 1 |
| Nearside Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
| Offside Front constant velocity joint gaiter insecurely mounted to its housing (2.5.C.1a) | 1 |
| Exhaust emits an excessive level of metered smoke for a turbo charged engine (7.4.B.3b) | 1 |
| Offside Rear coil spring broken (2.4.C.1a) | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded (5.2.6) | 1 |
| Nearside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Offside Lower Front suspension ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt (2.4.G.2) | 1 |
| Nearside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i)) | 1 |
| Offside Front Inner Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting wheel arch (6.2.2 (d) (i)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion, seriously affecting its strength within 30cm of a body mounting chassis repair inadequate (6.2.2 (d) (i)) | 1 |
| Nearside Front Lower Suspension arm pin or bush excessively worn arm rear bush (5.3.4 (a) (i)) | 1 |
| Offside Front Direction indicator incorrect colour (1.4.A.2f) | 1 |
| Nearside Rear Direction indicator incorrect colour (1.4.A.2f) | 1 |
| Offside Rear position lamp(s) adversely affected by the operation of another lamp (1.1.A.3f) | 1 |
| Offside Stop lamp adversely affected by the operation of another lamp (1.2.1f) | 1 |
| Offside Direction indicator adversely affected by the operation of another lamp (1.4.A.2h) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded (2.4.A.3) | 1 |
| Nearside front brake binding (3.7.B.1) | 1 |
| Offside front brake binding (3.7.B.1) | 1 |
| Nearside Rear reflector missing (1.5.1a) | 1 |
| Offside Rear reflector missing (1.5.1a) | 1 |
| Offside Front front brake binding (3.7.B.1) | 1 |
| Nearside Front front brake binding (3.7.B.1) | 1 |
| Offside Rear front brake binding (3.7.B.1) | 1 |
| Nearside Rear front brake binding (3.7.B.1) | 1 |
| Exhaust has a major leak of exhaust gases (7.1.2) | 1 |
| Emissions not tested (7.0) | 1 |
| Rear Brake load sensing valve seized (3.6.E.3) | 1 |
| Nearside Front Suspension component mounting prescribed area is inadequately repaired (2.4.A.3) | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone A (8.3.1e) | 1 |
| Horn not working (1.6.2a) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded front sub-frame rear mounting (2.4.A.3) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded lower inner wheel arch (2.4.A.3) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing at rear (5.3.6 (a) (i)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area excessively corroded significantly reducing structural strength wing at rear (5.3.6 (a) (i)) | 1 |
| Nearside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Lower Suspension component ball joint dust cover no longer prevents the ingress of dirt (5.3.4 (b) (ii)) | 1 |
| Offside Front Inner Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Brake load sensing valve seized but ABS functioning (1.1.17 (c) (i)) | 1 |
| Brake valve leaking |3.6.A.1| | 1 |
| Windscreen wiper blade insecure | 1 |
| Front Upper All outline marker lamps not working nearside and offside combined red/white lamps
over 2100 wide (4.2.1 (a) (ii)) | 1 |
| Offside Rear Hydraulic brake cylinder leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
| Nearside Rear Hydraulic brake cylinder leaking and braking performance affected (1.1.16 (b) (ii)) | 1 |
| Fuel tank leaking |7.2.3| | 1 |
| Nearside Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Horn not a constant note |1.7.1e| | 1 |
| Rear Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Battery insecure and likely to fall from carrier (4.13 (a) (ii)) | 1 |
| Nearside Front Passengers seat insecure (6.2.6 (a) (ii)) | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Brake pipe leaking |3.6.A.1| | 1 |
| Brake pipe leaking |3.6.A.1| | 1 |
| Offside Front Lower Suspension arm ball joint dust cover excessively deteriorated so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Brake performance not tested |3.7.A.1| | 1 |
| Offside Front Suspension component mounting prescribed area is excessively corroded inner arch |2.4.A.3| | 1 |
| Stop lamp(s) not working all lights (4.3.1 (a) (ii)) | 1 |
| Offside Side repeater not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced by subframe (6.1.1 (c) (i)) | 1 |
| Offside Front Integral body structure corroded to the extent that the rigidity of the assembly is significantly reduced inner arch (6.1.1 (c) (i)) | 1 |
| Exhaust has a major leak of exhaust gases silencer (6.1.2 (a)) | 1 |
| Emissions not tested (8.2.2.2 (e)) | 1 |
| Nearside Rear Upper Position lamp not working marker lamp (4.2.1 (a) (ii)) | 1 |
| Offside Front Integral body structure or chassis has excessive corrosion to the extent that overall security or stability of the body is impaired inner wing within 30 cm of engine mounting (6.2.2 (d) (ii)) | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill and outer sill and inner step all coroded within 30 cm of seat belt mounting (7.1.1 (a) (i)) | 1 |
| Nearside Rear Service brake excessively binding (1.2.1 (f)) | 1 |
| Front Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Rear Service brake excessively fluctuating (1.2.1 (e)) | 1 |
| Nearside Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Exhaust mounting missing |7.1.1b| | 1 |
| Nearside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Body has a sharp edge caused by corrosion |6.1.C.1| | 1 |
| Offside Front brake disc excessively pitted |3.5.1h| | 1 |
| Nearside Rear Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Inner Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Steering system excessively tight |2.2.D.1| | 1 |
| Nearside Side repeater not working |1.4.A.2c| | 1 |
| Stop lamp not working all |1.2.1b| | 1 |
| Headlamp levelling device inoperative |4.1.5 |a|| | 1 |
| Brake performance not tested (1.2.1 (g)) | 1 |
| Nearside Front Brake hose bulging under pressure (1.1.12 (d)) | 1 |
| Battery insecure and likely to fall from carrier req clamps (4.13 (a) (ii)) | 1 |
| Electrical wiring insecure |1.9.2a| | 1 |
| Offside Front Vehicle structure has excessive corrosion which adversely affects braking or steering REAR OF WISHBONE (6.1.1 (c) (ii)) | 1 |
| Offside Rear Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced CLOSE TO FREAR SPRING MOUNT (6.1.1 (c) (i)) | 1 |
| Nearside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Lower Suspension arm pin or bush excessively worn BOTH BUSHES (5.3.4 (a) (i)) | 1 |
| Nearside Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 1 |
| Offside Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 1 |
| Nearside Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i|| | 1 |
| Offside Subframe mounting prescribed area excessively corroded significantly reducing structural strength floor |5.3.6 |a| |i|| | 1 |
| Nearside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Offside Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner sill |5.3.6 |a| |i|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced |7.1.1 |a| |i|| | 1 |
| Nearside Front Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Nearside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Outer Rear Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Front Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Inner Front Upper Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Centre Front Vehicle structure has excessive corrosion which adversely affects braking or steering |6.1.A.1| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| Offside Rear Lower Direction indicator incorrect colour |1.4.A.2f| | 1 |
| Nearside Rear Upper Stop lamp not working |1.2.1b| | 1 |
| Rear brake application uneven | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength under out rigger (5.3.6 (a) (i)) | 1 |
| Nearside Rear Leaf spring to axle fixing bolt insecure (5.3.1 (a) (i)) | 1 |
| Nearside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Nearside Front Service brake lagging in operation (1.2.1 (d)) | 1 |
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
| Offside Front Headlamp insecure |1.7.3| | 1 |
| Offside Direction indicator not working |1.4.A.2c| | 1 |
| Offside Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Offside Rear Direction indicators incorrect colour |1.4.A.2f| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Offside Rear Rear fog lamp missing |1.3.2a| | 1 |
| Nearside Front constant velocity joint gaiter split |2.5.C.1a| | 1 |
| Offside Headlamp not working on dipped beam |1.7.5a| | 1 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Bonnet cannot be secured in the closed position |3.1 |b| |i|| | 1 |
| Nearside Rear Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Offside Rear Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Nearside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Offside Front Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Offside Front Inner Seat belt anchorage prescribed area is excessively corroded door step x5 places |5.2.6| | 1 |
| Nearside Front Inner Seat belt anchorage prescribed area is excessively corroded door step x1 place |5.2.6| | 1 |
| Nearside Front Front constant velocity joint gaiter damaged to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Nearside Front Headlamp aim beam image obviously incorrect |1.8.A.1b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded chassie leg |5.2.6| | 1 |
| Front brake application uneven | 1 |
| Nearside Headlamp excessively deteriorated so that the light output is severely reduced |1.7.5a| | 1 |
| Nearside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Offside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Rear Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill multiple patches (7.1.1 (a) (i)) | 1 |
| Offside Front Seat belt anchorage prescribed area strength or continuity significantly reduced inner sill multiple patches (7.1.1 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Nearside Front Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected inner wing (5.3.6 (a) (ii)) | 1 |
| Offside Front Inner Suspension component mounting prescribed area so inadequately repaired that control of the vehicle is likely to be adversely affected inner wing (5.3.6 (a) (ii)) | 1 |
| Nearside Front Electrical wiring insecure |1.9.2a| | 1 |
| Offside Rear Rear fog lamp emits a light other than red |1.3.2e| | 1 |
| Offside Body has excessive displacement which may lead to loss of vehicle control |6.1.B.1a| | 1 |
| Nearside Front Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Nearside Front constant velocity joint is insecure |2.5.C.1b| | 1 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |
| Nearside Rear Brake cable has restricted free movement (1.1.15 (e)) | 1 |
| Offside Rear Brake cable has restricted free movement (1.1.15 (e)) | 1 |
| Exhaust system insecure (6.1.2 (a)) | 1 |
| Nearside Rear Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
| Exhaust system insecure |6.1.2 |a|| | 1 |
| Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Rear Brake cable insecure | 1 |
| Nearside Front Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength floor (5.3.6 (a) (i)) | 1 |
| Exhaust emissions exceed default limit of 0.7m-1 (8.2.2.2 (b)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength lower door step (5.3.6 (a) (i)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Rear Suspension component mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FLOOR (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength FLOOR (5.3.6 (a) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength CHASSIS (5.3.6 (a) (i)) | 1 |
| Offside Inner Front Suspension arm has excessive play in a pin/bush |2.4.G.2| | 1 |
| Direction indicators incorrect colour |1.4.A.2f| | 1 |
| Offside Brake cable locking device insecure |3.5.1l| | 1 |
| Nearside Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Offside Inner Rear Suspension spring mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Parking brake: efficiency below requirements |3.7.D.4| | 1 |
| Nearside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Offside Front Lower Suspension arm rubber bush deteriorated resulting in excessive movement |2.4.G.2| | 1 |
| Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
| Headlamp aim beam image kick up to the offside |1.8| | 1 |
| Headlamp aim beam image kick up to the offside both |1.8| | 1 |
| Nearside Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Offside Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
| Exhaust system insecure bracket broken off |6.1.2 |a|| | 1 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
| Nearside Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
| Offside Headlamp aim beam image kick up to the offside |1.6.B1| | 1 |
| Offside Rear fog lamp not working |4.5.1 |a| |ii|| | 1 |
| Nearside Headlamp levelling device inoperative |4.1.5 |a|| | 1 |
| Offside Headlamp levelling device inoperative |4.1.5 |a|| | 1 |
| Central Front Lower Power steering pipe/hose excessively corroded on steering rack x 3 |2.1.5 |g| |i|| | 1 |
| Offside Front Lower Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing |5.3.6 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded arch |2.4.A.3| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded jacking point |2.4.A.3| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded jacking point |2.4.A.3| | 1 |
| Offside Front Front constant velocity joint gaiter insecure to the extent that it no longer prevents the ingress of dirt etc |2.5.C.1a| | 1 |
| Offside Front Track rod end ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Steering column movement between the shaft and steering wheel |2.1.2b| | 1 |
| Offside Front Shock absorber has negligible damping effect |2.7.5| | 1 |
| Offside Front Front suspension has excessive play in a lower suspension ball joint |2.5.B.1a| | 1 |
| Nearside Front wheel bearing has excessive play |2.5.A.3c| | 1 |
| Brake load sensing valve linkage seized |3.6.E.3| | 1 |
| Offside Front Front constant velocity joint gaiter insecurely mounted to its housing |2.5.C.1a| | 1 |
| Offside Front Outer Drive shaft joint constant velocity boot split or insecure, no longer prevents the ingress of dirt (6.1.7 (g) (ii)) | 1 |
| Trailer electrical socket |13 pin| not operating the trailer lamps as intended |1.9.4| | 1 |
| Offside Front Suspension spring mounting prescribed area is excessively corroded inner wheel arch |2.4.A.3| | 1 |
| Offside Front Outer Front constant velocity joint is insecure |2.5.C.1b| | 1 |
| Dipswitch operation does not deflect all main beam headlamps to make them dipped beams |1.7.4b| | 1 |
| Nearside Front Seat belt anchorage prescribed area is excessively corroded |5.2.6| | 1 |
| Nearside Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Offside Suspension spring mounting prescribed area is excessively corroded inner sill |2.4.A.3| | 1 |
| Nearside Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Offside Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Nearside Rear wheel bearing rough when rotated |2.6.1| | 1 |
| Nearside Seat belt anchorage prescribed area is severely distorted |5.2.6| | 1 |
| Nearside Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Nearside Front Body or chassis has an inadequate repair, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Windscreen has damage | 1 |
| Nearside Front Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Offside Front Ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.2.C.1c| | 1 |
| Nearside Front Ball joint has excessive play |2.2.B.1f| | 1 |
| Offside Front Ball joint has excessive play |2.2.B.1f| | 1 |
| Nearside Inner Front Brake pipe leaking |3.6.A.1| | 1 |
| Offside Rear Lower Leaf spring shackle bracket loose |2.4.B.6a| | 1 |
| Offside Front Subframe mounting prescribed area is excessively corroded under driverside step inner wheel arch |2.4.A.3| | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wheel well subframe mount |5.3.6 |a| |i|| | 1 |
| Front Exhaust system not adequately supported |7.1.1| | 1 |
| Vehicle structure has excessive corrosion, seriously affecting its strength within 30cm of the body mountings |6.1.B.2| | 1 |
| Offside Front Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Nearside Front Anti-roll bar linkage has excessive play in a pin/bush |2.4.G.2| | 1 |
| Nearside Front Subframe mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Offside Front Obligatory mirror seriously damaged, affecting the rear view |8.1.2a| | 1 |
| Nearside Front Wheel nut|s| loose |4.2.A.1e| | 1 |
| Offside Front Lower Torsion bar adjustment assembly inadequately locked |2.4.E.3| | 1 |
| Offside Front Lower Suspension component mounting prescribed area is excessively corroded |2.4.A.3| | 1 |
| Nearside Front Body or chassis has excessive corrosion, seriously affecting its strength within 30cm of the body mountings hole inner arch and jacking point |6.1.B.2| | 1 |
| Exhaust system insecure tail pipe |6.1.2 |a|| | 1 |
| Nearside Seat belt anchorage prescribed area strength or continuity significantly reduced sill and step area |7.1.1 |a| |i|| | 1 |
| Offside Seat belt anchorage prescribed area strength or continuity significantly reduced sill and step area |7.1.1 |a| |i|| | 1 |
| Nearside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected arch area |5.3.6 |a| |ii|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is corroded to the extent that control of the vehicle is likely to be adversely affected arch area |5.3.6 |a| |ii|| | 1 |
| Offside Front Inner Suspension component mounting prescribed area is excessively corroded sill of foot step/ jacking point |2.4.A.3| | 1 |
| Offside Front Lower Suspension arm ball joint excessively worn (5.3.4 (a) (i)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Windscreen has a sticker or other obstruction encroaching into the swept area by more than 40mm outside zone `A` |8.3.1e| | 1 |
| Brake performance not tested |1.2.1 |g|| | 1 |
| Nearside Front Inner Brake pipe at imminent risk of failure or fracture |1.1.11 |a|| | 1 |
| Offside Rear Shock absorbers has a serious fluid leak | 1 |
| Brake pedal creeps down while the pedal is held under pressure |3.3.B.1a| | 1 |
| Nearside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Offside Steering rack gaiter missing or no longer prevents the ingress of dirt (2.1.3 (g) (ii)) | 1 |
| Nearside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced Chassis leg |6.1.1 |c| |i|| | 1 |
| Nearside Service brake excessively binding 3rd axle |1.2.1 |f|| | 1 |
| Brake hose has insufficient room to move | 1 |
| Front Sub-frame corroded and seriously weakened |2.4.G.1| | 1 |
| Power steering component|s| leaking Steering Rack |2.3.3b| | 1 |
| Nearside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner wing behind strut bottom edge. (5.3.6 (a) (i)) | 1 |
| Nearside Front Outline marker lamp not working body side marker lamp. (4.2.1 (a) (ii)) | 1 |
| Offside Front Outline marker lamp not working body side marker lamp. (4.2.1 (a) (ii)) | 1 |
| Battery insecure and likely to cause a short circuit (4.13 (a) (ii)) | 1 |
| Central Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Vehicle Identification Number has more than one different number displayed |6.3.5.b| | 1 |
| Offside Rear Rear position lamp|s| not working TAILLIGHT |1.1.A.3b| | 1 |
| Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Headlamp aim not tested (4.1.2 (b)) | 1 |
| Offside Headlamp aim projected beam image is obviously incorrect kick wrong way (4.1.2 (c)) | 1 |
| Offside Rear fog lamp missing |1.3.2a| | 1 |
| Offside Rear Position lamp not working |4.2.1 |a|| | 1 |
| Offside Rear Position lamp light intensity significantly reduced tape over broken lens |4.2.3 |a| |ii|| | 1 |
| Nearside Front Headlamp aim projected beam image is obviously incorrect wrong side kick up |4.1.2 |c|| | 1 |
| Offside Front Headlamp aim projected beam image is obviously incorrect wrong side kick up |4.1.2 |c|| | 1 |
| Offside Front Service brake lagging in operation lower effort |1.2.1 |d|| | 1 |
| Offside Rear Outline marker lamp light intensity significantly reduced taped up |4.2.3 |a| |ii|| | 1 |
| Offside Rear Outline marker lamp not working |4.2.1 |a|| | 1 |