| Most common failures | No# failures |
|---|
| Service brake efficiency below requirements (1.2.2 (a) (i)) | 6 |
| Brakes imbalanced across an axle | 3 |
| Parking brake efficiency below requirements (1.4.2 (a) (i)) | 3 |
| Brake pipe excessively corroded | 3 |
| Headlamp aim out of alignment | 2 |
| Registration plate issues | 2 |
| Service brake: efficiency below requirements |3.7.B.7| | 2 |
| Parking brake: efficiency below requirements |3.7.B.7| | 2 |
| Engine MIL inoperative or indicates a malfunction (8.2.2.2 (g)) | 2 |
| Front brake application uneven | 1 |
| Service brake efficiency below requirements |1.2.2 |a| |i|| | 1 |
| Parking brake efficiency below requirements |1.4.2 |a| |i|| | 1 |
| Offside Front Inner Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced |6.1.1 |c| |i|| | 1 |
| Front Vehicle structure strengthening plate or fastening so insecure that structural rigidity is seriously reduced cross member cracked AND corroded |6.1.1 |b| |ii|| | 1 |
| Offside Rear Outline marker lamp not working |4.2.1 |a|| | 1 |
| Offside Rear Upper Outline marker lamp not working |4.2.1 |a|| | 1 |
| Offside Front Service brake excessively fluctuating |1.2.1 |e|| | 1 |
| Offside Rear Service brake excessively fluctuating |1.2.1 |e|| | 1 |
| Brake load sensing valve linkage defective and function impaired |1.1.17 |a|| | 1 |
| Offside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Rear Service brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced (6.1.1 (c) (i)) | 1 |
| Offside Front Service brake excessively binding (1.2.1 (f)) | 1 |
| Rear Brake load sensing valve seized and ABS not fitted or inoperative (1.1.17 (c) (ii)) | 1 |
| Front Engine MIL inoperative or indicates a malfunction (8.2.1.2 (h)) | 1 |
| Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 1 |
| Offside Front Wheel bearing rough when rotated |5.1.3 |b| |i|| | 1 |
| Offside Front Lower Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced subframe mount behind brake pipes (6.1.1 (c) (i)) | 1 |
| Power steering pipe|s| or hose|s| fouling other parts of the vehicle |2.3.2| | 1 |
| Brake hose damaged | 1 |
| Nearside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
| Offside Front Headlamp lens seriously defective (4.1.1 (b) (ii)) | 1 |
| Nearside Rear Brake cable damaged (1.1.15 (a)) | 1 |
| Nearside Rear Parking brake inoperative on one side (1.4.1 (a)) | 1 |
| Offside Rear Parking (secondary brake) on a single line braking system has inadequate effort at a wheel (1.3.1 (a) (i)) | 1 |
| Fuel cap/sealing device missing (6.1.3 (b) (i)) | 1 |
| Rear fog lamp not working |1.3.2b| | 1 |
| Brake cable guide defective and affecting operation rear brake cables x2 (1.1.15 (d)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced chassis leg marked with chalk (6.1.1 (c) (i)) | 1 |
| Offside Front Vehicle structure corroded to the extent that the rigidity of the assembly is significantly reduced jacking point marked with chalk (6.1.1 (c) (i)) | 1 |
| Offside Front Suspension component mounting prescribed area excessively corroded significantly reducing structural strength Inner wheel arch / chassis corroded within 30cm of sub frame mounting (5.3.6 (a) (i)) | 1 |
| Position lamp not working Position lamps not operating with ignition switched off (4.2.1 (a) (ii)) | 1 |
| Rear Service brake excessively binding both sides (1.2.1 (f)) | 1 |
| Headlamp levelling device cannot be operated from the drivers seat (4.1.5 (b)) | 1 |
| Offside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Nearside Front Direction indicator incorrect colour showing white (4.4.3 (a)) | 1 |
| Offside Front Upper Suspension component mounting prescribed area excessively corroded significantly reducing structural strength inner arch (5.3.6 (a) (i)) | 1 |
| Exhaust emissions exceed manufacturers specified limit 1.54 plate (8.2.2.2 (a)) | 1 |
| Nearside Rear Service brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
| Offside Front Direction indicator incorrect colour showing white (4.4.3 (a)) | 1 |
| Nearside Front Inner Subframe mounting prescribed area excessively corroded significantly reducing structural strength inner wing (5.3.6 (a) (i)) | 1 |
| Offside Front Subframe mounting prescribed area excessively corroded significantly reducing structural strength (5.3.6 (a) (i)) | 1 |
| Rear fog lamp not working (4.5.1 (a) (ii)) | 1 |