Most common failures | No# failures |
---|
Headlamp aim out of alignment | 31 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 24 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 23 |
Registration plate lamp issues | 13 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 11 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 10 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 9 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 8 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 8 |
Rear reflector missing (4.8.2 (a) (ii)) | 8 |
Headlamp aim not tested (4.1.2 (b)) | 7 |
Horn not working (7.7 (a) (ii)) | 7 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 7 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 7 |
Registration plate issues | 6 |
Stop lamp remains on when the brakes are released | 6 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 6 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 5 |
Rear Position lamp not working (4.2.1 (a)) | 4 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 4 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 4 |
Riders seat insecure (6.2.5 (a) (ii)) | 4 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 4 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 4 |
All direction indicators not working (4.4.1 (a) (ii)) | 4 |
Front Brake excessively binding (1.2.1 (f)) | 4 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 3 |
Indicator switch inoperative |4.4.2 |a| |ii|| | 3 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 3 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 3 |
Horn not working (7.7 (a)) | 3 |
Stop lamp not working (4.3.1 (a) (ii)) | 3 |
Rear Brake excessively binding (1.2.1 (f)) | 3 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Front brake disc in such a condition that it is seriously weakened | 2 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 2 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 2 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 2 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Rear Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 2 |
Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Front Brake disc contaminated (1.1.14 (b)) | 2 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
Rear reflector defective or damaged by more than 50% of the reflecting surface obscured by more than 50% (4.8.1 (a) (ii)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Nearside Rear Direction indicator with a multiple light source more than 1/2 not functioning (4.4.1 (a) (ii)) | 1 |
Indicator switch inoperative (4.4.2 (a) (ii)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Valve stem seriously damaged Perished. |5.2.3 |j|| | 1 |
Rear Valve stem seriously damaged Perished. |5.2.3 |j|| | 1 |
Rear Brake lever is so short that the brake cannot be readily applied |1.1.2 |d|| | 1 |
Stop lamp showing white light to the rear (4.3.3 (a) (ii)) | 1 |
Rear Brake lever insecure (1.1.2 (e) (i)) | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Headlamp aim projected beam image obviously incorrect bulb incorrectly fitted (4.1.2 (c)) | 1 |
Brake cable has restricted free movement not mounted at actuator arm correctly (1.1.15 (e)) | 1 |
Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
Rear Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
Stop lamp not working from front/right hand lever (4.3.1 (a) (ii)) | 1 |
Front Brake hose excessively damaged (1.1.12 (b) (ii)) | 1 |
Front Brake hose damaged and likely to fail (1.1.12 (a)) | 1 |
Nearside Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Motorcycle structure has a fracture which is likely to adversely affect braking or steering FAIRING |6.1.1 |a| |ii|| | 1 |
Rear Motorcycle structure has a fracture which is likely to adversely affect braking or steering FAIRING |6.1.1 |a| |ii|| | 1 |
Stop lamp adversely affected by the operation of another lamp |4.3.3 |b|| | 1 |
Headlamp aim not tested |4.1.2 |b|| | 1 |
Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b|| | 1 |
Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Handlebar deformed to the extent that steering is affected |2.2.1 |c| |ii|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Riders seat insecure Doesnt secure down on lock (6.2.5 (a) (ii)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Position lamp not working Front (4.2.1 (a)) | 1 |
Shock absorber has negligible damping effect Rear (5.3.2 (b)) | 1 |
Stop lamp emits other than a steady red light White light (4.3.3 (a) (ii)) | 1 |
Front Valve stem seriously misaligned (5.2.3 (j)) | 1 |
Front Brake master cylinder leaking (1.1.10 (b) (ii)) | 1 |
Rear Brake performance not tested rear brake jammed on (1.2.1 (g)) | 1 |
Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Brake performance not tested front and rear brakes binding (1.2.1 (g)) | 1 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Stop lamp not working Front brake switch faulty |4.3.1 |a| |ii|| | 1 |
Shock absorber has a serious fluid leak Front left fork leg |5.3.2 |b|| | 1 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
All direction indicators not working No Flashing when engine running (4.4.1 (a) (ii)) | 1 |
Nearside Forks excessively corroded |2.2.2 |d| |i|| | 1 |
Offside Forks excessively corroded |2.2.2 |d| |i|| | 1 |
Shock absorber has a serious fluid leak left fork |5.3.2 |b|| | 1 |
Shock absorber has a serious fluid leak right fork |5.3.2 |b|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Exhaust silencer likely to become detached |8.1.1 |b| |ii|| | 1 |
Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Brake performance not tested due to condition of front wheelbearing |1.2.1 |g|| | 1 |
Steering headbearing excessively stiff or notchy stiff (2.2.2 (f) (i)) | 1 |
Front Brake cylinder leaking brake master (1.1.16 (b) (i)) | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Brake lever not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Nearside Rear Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Stop lamp not working Front brake switch (4.3.1 (a) (ii)) | 1 |
Lower Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen Beam pattern obviously incorrect (4.1.2 (a)) | 1 |
Nearside Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Lower Engine mounting/bracket missing (6.1.8 (a) (ii)) | 1 |
Nearside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Nearside Upper Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Offside Upper Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Dipswitch does not operate immediately when selected on main beam |4.1.3 |b|| | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
All direction indicators not working Indicators do not flash (4.4.1 (a) (ii)) | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear Rear reflector on motorcycle obscured |1.4.2b| | 1 |
Rear Brake lever not releasing correctly and functionality of brakes affected |1.1.2 |b| |ii|| | 1 |
All direction indicators not working all (4.4.1 (a) (ii)) | 1 |
Suspension component pin or bush excessively worn excessive play in front head stock bearing (5.3.4 (a) (i)) | 1 |
Nearside Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Offside Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Brake hose excessively deteriorated | 1 |
Central Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Stop lamp not working on front brake control |4.3.1 |a| |ii|| | 1 |
Rear Valve stem seriously misaligned |5.2.3 |j|| | 1 |
Front Shock absorber has a serious fluid leak fork seals leaking front osf/nsf (5.3.2 (b)) | 1 |
Shock absorber has negligible damping effect fork legs corrosion front fork legs (5.3.2 (b)) | 1 |
Throttle operating incorrectly tick over to fast (6.2.7 (a) (i)) | 1 |
Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake caliper inadequately mounted (1.1.16 (c) (i)) | 1 |
Front Headlamp aim not tested (4.1.2 (b)) | 1 |
Front Brake disc insecure DISC BOLT LOSE (1.1.14 (a) (ii)) | 1 |
Rear Wheel bearing play so excessive that directional control is impaired axle nut slack on rear wheel (5.1.3 (a) (ii)) | 1 |
Handlebar mounting so insecure that steering is adversely affected (2.2.1 (a) (ii)) | 1 |
Nearside Front Brake lever is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
Front Steering linkage component insecure to the motorcycle structure |2.1.3 |a| |i|| | 1 |
Front Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
Nearside Brake lever has insufficient reserve travel Adjusted. (1.1.2 (a)) | 1 |
Rear Brake lever has abnormal movement of levers indicating excessive wear or maladjustment (1.1.15 (f)) | 1 |
Handlebar retaining device loose (2.2.1 (b) (i)) | 1 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Rear Upper Shock absorber has an excessively worn bush (5.3.2 (c)) | 1 |
Offside Rear Suspension component pin or bush excessively worn swing arm bracket (5.3.4 (a) (i)) | 1 |
Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Rear Brake grabbing severely (1.2.1 (c)) | 1 |
Offside Rear Suspension arm attachment bracket/mounting fractured (5.3.3 (b) (ii)) | 1 |
Fuel cap leaking |6.1.3 |b| |i|| | 1 |
Offside Front Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Headlamp insecure |4.1.1 |c|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Shock absorber has a serious fluid leak FORK SEALS (5.3.2 (b)) | 1 |
Headlamp not working on dipped beam Bulb replaced. (4.1.1 (a) (ii)) | 1 |
Central Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Stop lamp lens defective such that the emitted light is adversely affected (4.3.1 (b) (ii)) | 1 |
Suspension arm pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Rear Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Brake hose damaged | 1 |
Front Wheel bearing so rough it is likely to overheat or break up (5.1.3 (b) (ii)) | 1 |
Rear Rear reflector missing reflector covered up by l plate (4.8.2 (a) (ii)) | 1 |
Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
Rear Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
Suspension arm ball joint excessively worn rear swing arm bushes (5.3.4 (a) (i)) | 1 |
Upper Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
Lower Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |