Most common failures | No# failures |
---|
Rear Brake lever has inadequate reserve travel |3.1.3b| | 16 |
Steering headbearing has excessive free play |2.2.2| | 11 |
Headlamp aim out of alignment | 8 |
Rear reflector on motorcycle missing |1.4.1| | 7 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 7 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
Registration plate issues | 6 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Front Steering headbearing has excessive free play |2.2.2| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 2 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Indicator switch defective |1.5.4| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
Exhaust mounting missing |7.1.1c| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Brake hose damaged | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Brake hose excessively deteriorated | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear position lamp missing |1.1.1a| | 2 |
Fuel cap ineffective |6.1.3 |b| |i|| | 1 |
Steering headbearing has excessive wear or free play notchy head bearings |2.2.2 |f| |i|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Rear Brake lever attachment screws loose |3.1.2b| | 1 |
Horn is not continous or uniform |1.7.3c| | 1 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Brake lever cannot be released smoothly |3.1.3d| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Front Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Riders seat insecure |6.2.1a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Offside Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Direction indicator incorrect colour |1.5.1b| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front suspension assembly component excessively corroded. |2.3.1| | 1 |
Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Throttle operating incorrectly |6.2.1f| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Steering control handlebar movement restricted by trapped cables |2.1.2c| | 1 |
Steering linkage has excessive free play |2.2.2| | 1 |
Rear Brake cable has a significantly damaged outer casing. |3.2.A1b| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Offside Brake lever has inadequate reserve travel front brake |3.1.3b| | 1 |
Nearside Brake lever has inadequate reserve travel rear brake |3.1.3b| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Nearside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Offside Front Position lamp switch insecure |1.1.4b| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Headlamp aim not tested |1.6| | 1 |
Horn not working |1.7.3a| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Brake lever is inoperative |3.1.3c| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Steering lock stop ineffective |2.1.3| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Handlebar mounting clamp loose |2.1.1a| | 1 |
Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Nearside Rear Indicator tell tale not operating correctly |1.5.2| | 1 |
Rear Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Front Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
Horn control defective |1.7.2a| | 1 |
All position lamps adversely affected by the operation of another lamp |1.1.3b| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |