Most common failures | No# failures |
---|
Registration plate lamp issues | 4 |
Headlamp aim out of alignment | 4 |
Rear Position lamp not working (4.2.1 (a)) | 3 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 3 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front Valve stem seriously damaged |5.2.3 |j|| | 2 |
Headlamp aim not tested |1.6| | 2 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Footrest missing (6.2.12 (a)) | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear position lamp missing |1.1.1a| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Front Roller brake test indicates a severely grabbing brake Brake disc bent |3.3.A1b| | 1 |
Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Exhaust silencer likely to become detached missing |8.1.1 |b| |ii|| | 1 |
Position lamp showing white light to the rear lens broken |4.2.3 |a| |ii|| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Horn not working |1.7.3a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Shock absorber insecurely attached |5.3.2 |a| |i|| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen X2 |4.1.2 |a|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Exhaust system insecure mounting bolt loose and one is missing |6.1.2 |a|| | 1 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
Steering operation impeded by a fairing handle bar cover loose |2.1.4 |e|| | 1 |
Horn not working |7.7 |a| |ii|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Stop lamp not working Stop light not working on front brake. |4.3.1 |a| |ii|| | 1 |
Offside Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Fuel cap ineffective |6.1.3 |b| |i|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Stop lamp adversely affected by the operation of another lamp |4.3.3 |b|| | 1 |
Rear Stop lamp adversely affected by the operation of another lamp |4.3.3 |b|| | 1 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Brake hose excessively deteriorated | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Front Brake fluid reservoir fluid level significantly below minimum level |1.1.10 |d| |ii|| | 1 |
Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Stop lamp not working front lever (4.3.1 (a) (ii)) | 1 |
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b)) | 1 |
Headlamp aim not tested (4.1.2 (b)) | 1 |
Nearside Rear Upper Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Nearside Front Headlamp reflector seriously defective melted (4.1.1 (b) (ii)) | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Central Rear Inner Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Central Rear Lower Engine mounting/bracket bracket excessively loose (6.1.8 (a) (ii)) | 1 |
Central Rear Inner Suspension component pin or bush excessively worn (5.3.4 (a) (i)) | 1 |
Exhaust system insecure (6.1.2 (a)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Nearside Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Horn not working (7.7 (a)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls Via Front (4.3.2 (a) (iii)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |