MOT History from tests of petrol YAMAHA YZF600s year 1996

Review the list of common YAMAHA YZF600 failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history

Pass percent:75.26%

(The average a petrol YAMAHA YZF600 year 1996 passes without issue)

Based on:4,462 MOT Tests

Most common failures	No# failures
Rear reflector on motorcycle missing \|1.4.1\|	149
Headlamp aim out of alignment	100
Front Roller brake test indicates a binding brake \|3.3.A1a\|	81
Registration plate issues	59
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	54
Drive chain excessively loose \|6.2.1d\|	51
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	46
Rear Rear reflector on motorcycle missing \|1.4.1\|	42
Exhaust is leaking and excessively noisey \|7.1.1b\|	42
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	42
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	32
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	28
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	25
Front shock absorber seal failed and leaking oil \|2.3.3\|	24
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	21
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	21
Drive chain worn to excess \|6.2.1e\|	20
Horn not working \|1.7.3a\|	20
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	18
Rear Drive chain sprocket worn to excess \|6.2.1e\|	17
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	17
Front Brake excessively binding (1.2.1 (f))	16
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	15
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	15
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	15
Offside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	14
Front Floor brake test indicates a binding brake \|3.3.C2c\|	14
Throttle operating incorrectly \|6.2.1f\|	14
Rear Brake disc\|s\| cracked \|3.2.A1g\|	14
Front wheel bearings are excessively rough \|2.3.5b\|	13
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	13
Front wheel bearings have excessive free play \|2.3.5b\|	13
Offside Handlebar deformed \|2.1.1b\|	11
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	10
Exhaust markings indicating not for road use or similar wording \|7.1.4\|	10
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	10
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	10
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	9
Headlamp aim beam image kick up to the offside \|1.6\|	9
Exhaust excessively deteriorated \|7.1.1a\|	9
Nearside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	9
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	9
Nearside Rear Direction indicator not working \|1.5.1c\|	9
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	8
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	8
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	8
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	8
Offside Rear Direction indicator not working \|1.5.1c\|	8
Drive chain excessively tight \|6.2.1d\|	8
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	8
Nearside Handlebar deformed \|2.1.1b\|	7
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	7
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	7
Front Shock absorber has a serious fluid leak (5.3.2 (b))	7
Front Drive chain sprocket worn to excess \|6.2.1e\|	6
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	6
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	6
Rear wheel bearings have excessive free play \|2.4.A.2c\|	6
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	6
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	6
Nearside Front Direction indicator not working \|1.5.1c\|	6
Offside Front Direction indicator not working \|1.5.1c\|	6
Nearside Front Direction indicator not working (4.4.1 (a) (ii))	6
Front Hydraulic brake control feels spongy \|3.1.4a\|	5
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	5
Centre Rear reflector on motorcycle missing \|1.4.1\|	5
Front Front wheel bearings have excessive free play \|2.3.5b\|	5
Rear Brake locking device missing \|3.2.A1e\|	5
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	5
Offside Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	5
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	5
Offside Front Footrest insecure \|6.2.1a\|	5
Rear Valve stem seriously damaged (5.2.3 (j))	5
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	4
Rear reflector on motorcycle incorrectly positioned \|1.4.2d\|	4
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	4
Front Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	4
Horn not working \|7.7 \|a\| \|ii\|\|	4
Front Brake excessively binding \|1.2.1 \|f\|\|	4
Nearside Front Direction indicator insecure \|1.5.3b\|	4
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	4
Steering headbearing has excessive free play \|2.2.2\|	4
Front Brake lever cannot be applied smoothly \|3.1.3d\|	4
Offside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	4
Rear Drive chain excessively loose \|6.2.1d\|	4
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	4
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	4
Nearside Front Footrest insecure \|6.2.1a\|	4
Front Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	4
Rear suspension movement is excessively stiff \|2.4.A.3b\|	4
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	4
Rear reflector missing (4.8.2 (a) (ii))	4
Drive chain excessively loose (6.1.7 (c) (i))	4
Rear Position lamp not working (4.2.1 (a))	4
Rear Brake excessively binding (1.2.1 (f))	4
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))	4

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Most common failures	No# failures
Rear reflector on motorcycle missing \|1.4.1\|	149
Headlamp aim out of alignment	100
Front Roller brake test indicates a binding brake \|3.3.A1a\|	81
Registration plate issues	59
Nearside Front shock absorber seal failed and leaking oil \|2.3.3\|	54
Drive chain excessively loose \|6.2.1d\|	51
Offside Front shock absorber seal failed and leaking oil \|2.3.3\|	46
Rear Rear reflector on motorcycle missing \|1.4.1\|	42
Exhaust is leaking and excessively noisey \|7.1.1b\|	42
Front Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	42
Rear Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	32
Stop lamp does not illuminate immediately a brake applies \|1.3.1a\|	28
Front Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	25
Front shock absorber seal failed and leaking oil \|2.3.3\|	24
Nearside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	21
Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	21
Drive chain worn to excess \|6.2.1e\|	20
Horn not working \|1.7.3a\|	20
Rear position lamp does not illuminate immediately when it is switched on \|1.1.3a\|	18
Rear Drive chain sprocket worn to excess \|6.2.1e\|	17
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition \|7.1.2\|	17
Front Brake excessively binding (1.2.1 (f))	16
Nearside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	15
Offside Front Front shock absorber seal failed and leaking oil \|2.3.3\|	15
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))	15
Offside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	14
Front Floor brake test indicates a binding brake \|3.3.C2c\|	14
Throttle operating incorrectly \|6.2.1f\|	14
Rear Brake disc\|s\| cracked \|3.2.A1g\|	14
Front wheel bearings are excessively rough \|2.3.5b\|	13
Rear Roller brake test indicates a binding brake \|3.3.A1a\|	13
Front wheel bearings have excessive free play \|2.3.5b\|	13
Offside Handlebar deformed \|2.1.1b\|	11
Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	10
Exhaust markings indicating not for road use or similar wording \|7.1.4\|	10
Front Roller brake test indicates a sticking brake \|3.3.A1a\|	10
Rear Roller brake test indicates excessive fluctuation of brake effort \|3.3.A1d\|	10
Steering movement excessively `notchy` with the wheel raised \|2.2.1b\|	9
Headlamp aim beam image kick up to the offside \|1.6\|	9
Exhaust excessively deteriorated \|7.1.1a\|	9
Nearside Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	9
Rear Brake disc\|s\| excessively worn \|3.2.A1l\|	9
Nearside Rear Direction indicator not working \|1.5.1c\|	9
Steering movement excessively `notchy` with the weight on the lower bearing \|2.2.1a\|	8
Front Exhaust is leaking and excessively noisey \|7.1.1b\|	8
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	8
Front Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	8
Offside Rear Direction indicator not working \|1.5.1c\|	8
Drive chain excessively tight \|6.2.1d\|	8
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b))	8
Nearside Handlebar deformed \|2.1.1b\|	7
Headlamp at least one does not illuminate on main beam \|1.2.2a\|ii\|\|	7
Offside Handlebar handgrip not secure to handlebars. \|2.1.1c\|	7
Front Shock absorber has a serious fluid leak (5.3.2 (b))	7
Front Drive chain sprocket worn to excess \|6.2.1e\|	6
Rear position lamp adversely affected by the operation of another lamp \|1.1.3b\|	6
Direction indicators flashing more than 120 times per minute \|1.5.1c\|	6
Rear wheel bearings have excessive free play \|2.4.A.2c\|	6
Rear suspension bush has excessive free play \|2.4.A2a\|i\|\|	6
Headlamp at least one does not illuminate on dipped beam \|1.2.2a\|i\|\|	6
Nearside Front Direction indicator not working \|1.5.1c\|	6
Offside Front Direction indicator not working \|1.5.1c\|	6
Nearside Front Direction indicator not working (4.4.1 (a) (ii))	6
Front Hydraulic brake control feels spongy \|3.1.4a\|	5
Rear Brake disc\|s\| excessively scored \|3.2.A1l\|	5
Centre Rear reflector on motorcycle missing \|1.4.1\|	5
Front Front wheel bearings have excessive free play \|2.3.5b\|	5
Rear Brake locking device missing \|3.2.A1e\|	5
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars \|2.1.2b\|	5
Offside Brake disc\|s\| friction surface contaminated by oil or grease \|3.2.A1k\|	5
Rear Rear shock absorber has inadequate damping effect. \|2.4.A.3b\|	5
Exhaust mounting does not fully support the exhaust system \|7.1.1.c\|	5
Offside Front Footrest insecure \|6.2.1a\|	5
Rear Valve stem seriously damaged (5.2.3 (j))	5
Front Front shock absorber seal failed and leaking oil \|2.3.3\|	4
Roller brake test The less effective brake control does not achieve an efficiency of 25%. \|3.3.A2b\|	4
Rear reflector on motorcycle incorrectly positioned \|1.4.2d\|	4
Front Front position lamp does not illuminate immediately when switched on \|1.1.3a\|	4
Front Roller brake test indicates a severely grabbing brake \|3.3.A1b\|	4
Horn not working \|7.7 \|a\| \|ii\|\|	4
Front Brake excessively binding \|1.2.1 \|f\|\|	4
Nearside Front Direction indicator insecure \|1.5.3b\|	4
Rear suspension bearing has excessive free play \|2.4.A2a\|i\|\|	4
Steering headbearing has excessive free play \|2.2.2\|	4
Front Brake lever cannot be applied smoothly \|3.1.3d\|	4
Offside Front Shock absorber has a serious fluid leak \|5.3.2 \|b\|\|	4
Rear Drive chain excessively loose \|6.2.1d\|	4
Front Brake disc\|s\| has excessive run out \|3.2.A1m\|	4
Wheel alignment incorrect which adversely affects the steering \|2.5.1\|	4
Nearside Front Footrest insecure \|6.2.1a\|	4
Front Stop lamp not working \|4.3.1 \|a\| \|ii\|\|	4
Rear suspension movement is excessively stiff \|2.4.A.3b\|	4
Front Floor brake test indicates a sticking brake \|3.3.C2c\|	4
Rear reflector missing (4.8.2 (a) (ii))	4
Drive chain excessively loose (6.1.7 (c) (i))	4
Rear Position lamp not working (4.2.1 (a))	4
Rear Brake excessively binding (1.2.1 (f))	4
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e))	4

MOT History from tests of petrol YAMAHA YZF600s year 1996

Find us on Facebook