Most common failures | No# failures |
---|
Headlamp aim out of alignment | 30 |
Rear reflector on motorcycle missing |1.4.1| | 23 |
Registration plate issues | 20 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
Rear Rear reflector on motorcycle missing |1.4.1| | 7 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 6 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Drive chain excessively loose |6.2.1d| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 5 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 5 |
Nearside Headlamp aim beam image kick up to the offside |1.6| | 4 |
Offside Headlamp aim beam image kick up to the offside |1.6| | 4 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 4 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Steering headbearing has excessive free play |2.2.2| | 2 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Horn not working |1.7.3a| | 2 |
Offside Front Direction indicators not working |1.5.1c| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Centre Rear reflector on motorcycle missing |1.4.1| | 2 |
Rear Brake disc|s| has excessive run out |3.2.A1m| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Drive chain excessively tight |6.2.1d| | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Stop lamp does not illuminate immediately a brake applies foot |1.3.1a| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front position lamp incorrect colour |1.1.2a| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear Plate brake test indicates a severely grabbing brake |3.3.B1b| | 1 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Stop lamp does not illuminate immediately a brake applies Front |1.3.1a| | 1 |
Front shock absorber seal failed and leaking oil R/H |2.3.3| | 1 |
Brake disc|s| friction surface contaminated by oil or grease R/H |3.2.A1k| | 1 |
Drive chain excessively loose |6.1.7 |c| |i|| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Fairings insecure and likely to impede the steering brake lever fouling |2.1.2e| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front Brake hose fouling brake hose rubbing clocks |3.2.B3b| | 1 |
Centre Rear Lower Rear suspension bush has excessive free play link bush. |2.4.A2a|i|| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Front Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Centre Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Rear Lower Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Drive chain so loose it is likely to fail |6.1.7 |c| |ii|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front Position lamp not working bulb was blown |4.2.1 |a|| | 1 |
Rear Stop lamp not working rear brake light switch needed adjusting |4.3.1 |a| |ii|| | 1 |
Nearside Rear suspension component loose |2.4.A.1a| | 1 |
Offside Rear suspension component loose |2.4.A.1a| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Direction indicator incorrect colour |1.5.1b| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
An item not tested |Manual| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Front Brake excessively binding binding brake and could grab completely with heated discs due to friction |1.2.1 |f|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear suspension bush has excessive free play SWINGING ARM BUSHES |2.4.A2a|i|| | 1 |
Nearside Position lamp switch insecure |1.1.4b| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Offside Rear Footrest missing |6.2.1a| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Nearside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Nearside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Central Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Offside Rear Roller brake test indicates a binding brake caliper pistons partially seized giving 20 kgf bind on roller brake test |3.3.A1a| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Chain guard insecure |6.2.1c| | 1 |
Nearside Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front position lamp missing |1.1.1a| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp not working On rear foot lever |4.3.1 |a| |ii|| | 1 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Centre Front Lower Horn not working |1.7.3a| | 1 |
Offside Front Direction indicator insecure |1.5.3b| | 1 |
Front Valve stem seriously damaged |5.2.3 |j|| | 1 |
Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Offside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Fuel system component leaking (6.1.3 (b) (i)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Rear suspension bush has excessive free play (2.4.A2a(i)) | 1 |
Rear Brake component worn and seriously reduced in strength (3.2.A1) | 1 |
Roller brake test No brake control achieves an efficiency of 30%. (3.3.A2a) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear reflector on motorcycle missing (1.4.1) | 1 |
Offside Front Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Nearside Front Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Fuel tank insecure (6.1.3 (a) (i)) | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Stop lamp not working Rear control (4.3.1 (a) (ii)) | 1 |
All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Offside Rear Position lamp not working (4.2.1 (a)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Registration plate lamp issues | 1 |