Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 46 |
Headlamp aim out of alignment | 43 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 25 |
Registration plate issues | 19 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 14 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Exhaust is leaking and excessively noisey |7.1.1b| | 11 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 10 |
Rear Rear reflector on motorcycle missing |1.4.1| | 10 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Headlamp aim beam image kick up to the offside |1.6| | 8 |
Drive chain excessively loose |6.2.1d| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 7 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 7 |
Drive chain excessively tight |6.2.1d| | 6 |
Drive chain worn to excess |6.2.1e| | 6 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 6 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Front wheel bearings have excessive free play |2.3.5b| | 5 |
Throttle operating incorrectly |6.2.1f| | 5 |
Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Horn not working |1.7.3a| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 3 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 3 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
Front Front wheel bearings have excessive free play |2.3.5b| | 3 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 3 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Offside Front Brake pipe union leaking fluid |3.2.B4| | 2 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Nearside Rear Direction indicator insecure |1.5.3b| | 2 |
Offside Front Direction indicator not working |1.5.1c| | 2 |
Headlamp incorrect colour |1.2.1| | 2 |
Rear Drive chain excessively tight |6.2.1d| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Rear mono-shock pivot seized |2.4.B.4| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Offside Rear Direction indicator insecure |1.5.3b| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Offside Handlebar deformed |2.1.1b| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front position lamp incorrect colour |1.1.2a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Offside Front Brake disc contaminated |1.1.14 |b|| | 1 |
Rear Rear wheel spindle loose |2.4.A.2b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Rear reflector on motorcycle damaged and function impaired |1.4.2a| | 1 |
Front Headlamp incorrect colour |1.2.1| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Brake disc|s| excessively worn rear |3.2.A1l| | 1 |
Front shock absorber seal failed and leaking oil Both |2.3.3| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Offside Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
Rear Roller brake test indicates brake effort fall disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock cables routed incorrect |2.1.4| | 1 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
Front position lamp deteriorated and function impaired |1.1.1b| | 1 |
Nearside Front Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Nearside Rear Drive chain excessively loose |6.2.1d| | 1 |
An item not tested |Manual| | 1 |
Rear mono-shock insecure |2.4.B.4| | 1 |
Front wheel spindle securing nut locking device insecure |2.3.3a| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Central Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Brake locking device insecure |3.2.A1e| | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Steering linkage has excessive free play |2.2.2| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Front Front position lamp incorrect colour |1.1.2a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Offside Rear Footrest insecure |6.2.1a| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Rear Wheel bearing has excessive play |5.1.3 |a| |i|| | 1 |
Sidecar front position lamp incorrect colour |1.1.2a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Front Indicator switch insecure |1.5.4| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Nearside Front Steering lock stop ineffective |2.1.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Rear reflector on motorcycle insecure |1.4.2c| | 1 |
Centre Front Lower Horn not working |1.7.3a| | 1 |
Offside Front Lower Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Rear Lower Direction indicator not working |1.5.1c| | 1 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Rear Drive chain excessively tight |6.1.7 |k| |i|| | 1 |
Central Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Brake lever mounting insecure |3.1.2a| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Lower Brake hose excessively kinked |3.2.B3a| | 1 |
Front Upper Brake hose fouling |3.2.B3b| | 1 |
Front Brake component is severely distorted |3.1.5| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Nearside Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Offside Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Front An item not tested |Manual| | 1 |
Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Rear Brake locking device missing |3.2.A1e| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Brake lever insecure |3.1.2a| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Rear wheel insecure |4.2.3b| | 1 |
Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Front Headlamp main beam flickers when tapped lightly by hand |1.2.2c| | 1 |
Offside Rear Brake locking device missing |3.2.A1e| | 1 |
Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
Nearside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Nearside Steering lock stop ineffective |2.1.3| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Rear Indicator tell tale not operating correctly |1.5.2| | 1 |
Rear Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Position lamp showing white light to the rear lens damage (4.2.3 (a) (ii)) | 1 |
Offside Front Outer Brake disc contaminated (1.1.14 (b)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Stop lamp not working From rear control (4.3.1 (a) (ii)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Offside Front Brake hose leaking At caliper (1.1.12 (c)) | 1 |
Rear Brake lining(s) less than 1.0 mm thick (1.1.13 (a)) | 1 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Throttle operating incorrectly sticking on hand control (6.2.7 (a) (i)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Nearside Front Brake hose leaking (1.1.12 (c)) | 1 |