Most common failures | No# failures |
---|
Rear reflector on motorcycle missing |1.4.1| | 46 |
Headlamp aim out of alignment | 32 |
Registration plate issues | 26 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 16 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Drive chain excessively loose |6.2.1d| | 9 |
Rear Rear reflector on motorcycle missing |1.4.1| | 9 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 9 |
Exhaust is leaking and excessively noisey |7.1.1b| | 8 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Throttle operating incorrectly |6.2.1f| | 6 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
Rear reflector missing |4.8.2 |a| |ii|| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Headlamp aim beam image kick up to the offside |1.6| | 4 |
Offside Front Direction indicator not working |1.5.1c| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 4 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 4 |
Front Roller brake test indicates a sticking brake |3.3.A1a| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 3 |
Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Offside Front Direction indicators not working |1.5.1c| | 3 |
Horn not working |1.7.3a| | 3 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 3 |
Nearside Front Footrest insecure |6.2.1a| | 3 |
Horn not working |7.7 |a| |ii|| | 3 |
Nearside Front Direction indicators not working |1.5.1c| | 3 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 3 |
Nearside Front Brake disc contaminated (1.1.14 (b)) | 3 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front Floor brake test indicates a severely grabbing brake |3.3.C2d| | 2 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Rear Brake disc|s| cracked |3.2.A1g| | 2 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 2 |
Front wheel bearings are excessively rough |2.3.5b| | 2 |
Offside Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Handlebar deformed |2.1.1b| | 2 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Brake hose excessively deteriorated | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Rear Lower Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear suspension bush excessively deteriorated |2.4.A2a|i|| | 1 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Rear Brake component cracked and seriously reduced in strength |3.2.A1| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Drive chain excessively tight |6.2.1d| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Brake hose damaged | 1 |
Inner Rear reflector on motorcycle missing |1.4.1| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Centre Lower Exhaust mounting missing |7.1.1c| | 1 |
Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Rear wheel spindle loose |2.4.A.2b| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Stop lamp does not illuminate immediately a brake applies Inop |1.3.1a| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies Switch adjustment |1.3.1a| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded caliper |3.2.A1h| | 1 |
Nearside Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Horn missing |1.7.1| | 1 |
Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Offside Rear Lower Brake locking device missing |3.2.A1e| | 1 |
Nearside Rear Lower Drive chain excessively loose |6.2.1d| | 1 |
Offside Lower Fairings insecure and likely to impede the steering bolts missing |2.1.2e| | 1 |
Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Nearside Front Brake cylinder leaking hydraulic fluid caliper |3.2.B1e| | 1 |
Brake reaction bracket insecure |3.2.A1j| | 1 |
Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Lower Rear mono-shock pivot seized |2.4.B.4| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Drive chain sprocket worn to excess |6.2.1e| | 1 |
Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Rear Drive chain excessively loose |6.2.1d| | 1 |
Rear Drive chain fouling another component |6.2.1d| | 1 |
Offside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Front Footrest insecure |6.2.1a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Upper Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Centre Front Lower Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Plate brake test indicates a binding brake |3.3.B1a| | 1 |
Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Offside Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear Footrest missing |6.2.12 |a|| | 1 |
Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced |6.1.1 |b| |ii|| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.4 |a|| | 1 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Direction indicator flashing more than 120 times per minute all |1.5.1c| | 1 |
Rear Rear wheel spindle loose |2.4.A.2b| | 1 |
Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Offside Handlebar deformed |2.1.1b| | 1 |
Offside Steering lock stop ineffective |2.1.3| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Nearside Front Brake pipe excessively damaged |3.2.B2a| | 1 |
Offside Front Brake pipe excessively damaged |3.2.B2a| | 1 |
Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Suspension component modified so the suspension is inoperative |5.3.3 |c| |ii|| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Centre Front Horn not working |1.7.3a| | 1 |
Centre Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Direction indicator missing |1.5.1a| | 1 |
Rear Direction indicator missing |1.5.1a| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Offside Rear Direction indicators not working |1.5.1c| | 1 |
Indicator tell tale not operating correctly |1.5.2| | 1 |
Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Front Brake performance not tested |3.3| | 1 |
Floor brake test No brake control achieves an efficiency of 30%. |3.3.C1a| | 1 |
Floor brake test Neither brake control achieves an efficiency of 25% |3.3.C1b| | 1 |
Suspension attachment bracket/mounting insecure bolt snapped |5.3.3 |a| |i|| | 1 |
Offside Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
Offside Front Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Upper Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 1 |
Front Indicator tell tale not functioning |1.5.2| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Nearside Front Lower Direction indicators not working |1.5.1c| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Rear Brake performance not tested |3.3| | 1 |
Nearside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Rear Wheel alignment incorrect which adversely affects the handling chain adjusters out of alignment |2.5.1| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Rear Brake excessively binding |1.2.1 |f|| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Nearside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Chain guard insecure |6.2.1c| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Plate brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake component inadequately mounted reaction bracket split pins missing (1.1.21 (c)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
Headlamp insecure (4.1.1 (c)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Drive chain excessively loose (6.1.7 (c) (i)) | 1 |
Drive chain excessively tight (6.1.7 (k) (i)) | 1 |
Central Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Central Front Position lamp not working (4.2.1 (a)) | 1 |
Front Brake disc contaminated (1.1.14 (b)) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |
Rear Position lamp showing white light to the rear tail light has white around the outer edge (4.2.3 (a) (ii)) | 1 |
Front Brake hose excessively twisted both pipes fitted incorrectly fitted (up side down) and likely to fail (1.1.12 (b) (ii)) | 1 |
Handlebar so insecure it is likely to become detached both-- missing bolts x3 (2.2.1 (b) (ii)) | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Registration plate lamp issues | 1 |
Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
Front Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Horn not working (7.7 (a)) | 1 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |