Most common failures | No# failures |
---|
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 36 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 25 |
Headlamp aim out of alignment | 23 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 23 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 19 |
Registration plate issues | 17 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 15 |
Exhaust is leaking and excessively noisey |7.1.1b| | 13 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 13 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 10 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 9 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 9 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 8 |
Rear Position lamp not working (4.2.1 (a)) | 8 |
Steering headbearing has excessive free play |2.2.2| | 7 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 7 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
Headlamp insecure |1.2.3b| | 5 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Horn not working |1.7.3a| | 4 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 4 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 4 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Horn not working (7.7 (a) (ii)) | 4 |
Registration plate lamp issues | 4 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 4 |
All direction indicators not working (4.4.1 (a) (ii)) | 4 |
Throttle operating incorrectly |6.2.1f| | 3 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Headlamp aim not tested |1.6| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 3 |
Offside Rear Direction indicators not working |1.5.1c| | 3 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 3 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 3 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 3 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 3 |
Headlamp aim not tested (4.1.2 (b)) | 3 |
Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 3 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 3 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 3 |
Horn is not a constant note |1.7.3c| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Front position lamp insecure |1.1.1c| | 2 |
Rear Brake lever is inoperative |3.1.3c| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Direction indicator incorrect colour |1.5.1b| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Front Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear reflector on motorcycle missing |1.4.1| | 2 |
Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Stop lamp remains on when the brakes are released | 2 |
Front Brake excessively binding |1.2.1 |f|| | 2 |
Nearside Front Direction indicator missing |1.5.1a| | 2 |
Offside Front Direction indicator missing |1.5.1a| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Indicator tell tale not functioning |1.5.2| | 2 |
Front Direction indicator incorrect colour |1.5.1b| | 2 |
Nearside Front Direction indicator insecure |1.5.3b| | 2 |
Offside Front Direction indicator insecure |1.5.3b| | 2 |
Headlamp insecure |4.1.1 |c|| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 2 |
Front Brake disc|s| excessively scored |3.2.A1l| | 2 |
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Horn sound not in accordance with requirements (7.7 (c)) | 2 |
Rear Brake fluid not visible (1.1.10 (d) (iii)) | 2 |
Front Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Central Rear Upper Position lamp not working (4.2.1 (a)) | 2 |
Headlamp insecure (4.1.1 (c)) | 2 |
Offside Rear Direction indicator incorrect colour (4.4.3 (a)) | 2 |
Shock absorber has negligible damping effect (5.3.2 (b)) | 2 |
Exhaust system insecure (6.1.2 (a)) | 2 |
Front Position lamp not working (4.2.1 (a)) | 2 |
Horn not working (7.7 (a)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Nearside Front Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Front Front position lamp incorrect colour |1.1.2a| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Dipswitch does not operate immediately when selected on dipped beam |4.1.3 |b|| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Central Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Stop lamp insecure |1.3.3b| | 1 |
Throttle operating incorrectly Engine revs are excessively high unable to perform lock to lock correctly |6.2.1f| | 1 |
Front position lamp does not illuminate immediately when switched on dipped beam |1.1.3a| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Upper Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
Headlamp main beam affected by the operation of the horn |1.2.2c| | 1 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Rear position lamp adversely affected by the operation of the horn |1.1.3b| | 1 |
Fuel cap missing |7.2.2a| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 1 |
Brake locking device missing |3.2.A1e| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies left hand brake switch intermittent inop |1.3.1a| | 1 |
Front Stop lamp missing not working |1.3.3a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Nearside Brake lever insecure |3.1.2a| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Nearside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Vehicle identification number not displayed |0.2 |a|| | 1 |
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i|| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake |1.3.1a| | 1 |
All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Rear Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Central Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Nearside Front Position lamp switch insecure |1.1.4b| | 1 |
Stop lamp does not illuminate immediately a brake applies front stop light does not work |1.3.1a| | 1 |
Front Stop lamp missing front not working |4.3.1 |a| |ii|| | 1 |
Rear All direction indicators incorrect colour |4.4.3 |a|| | 1 |
Rear Brake cylinder has no reserve travel and braking performance affected no resurve travel |1.1.16 |e| |ii|| | 1 |
Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Nearside Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Stop lamp showing white light to the rear |4.3.3 |a| |ii|| | 1 |
Front Position lamp not working |4.2.1 |a|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Offside Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Front wheel bearings have excessive free play |2.3.5b| | 1 |
Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Nearside Lower Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
Nearside Rear Upper Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Lower Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Front Headlamp insecure |1.2.3b| | 1 |
Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
Offside Front Brake lever cracked |3.1.2c| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Exhaust has a major leak of exhaust gases manifold |6.1.2 |a|| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Front Brake disc significantly and obviously worn |1.1.14 |a| |i|| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Sidecar front position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Seat insecure |6.2.1a| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.4 |a|| | 1 |
Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
Front Brake lining|s| contaminated by oil or grease |3.2.A1k| | 1 |
Headlamp aim beam image kick up to the offside pattern upside down |1.6| | 1 |
Stop lamp does not illuminate immediately a brake applies front brake application |1.3.1a| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Stop lamp does not illuminate immediately a brake applies front stop lamp not working |1.3.1a| | 1 |
Rear Direction indicator incorrect colour |1.5.1b| | 1 |
Stop lamp does not illuminate immediately a brake applies Rear brake control |1.3.1a| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust mounting does not fully support the exhaust system Bracket damaged - mounting bolt missing |7.1.1.c| | 1 |
Stop lamp does not emit a steady light no brake light off front or rear lever |1.3.1b| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride centre stand locking pin missing |6.2.1h| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear engine bolt loose |6.2.1h| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Offside Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Nearside Rear Brake lever has insufficient reserve travel rear brake |1.1.2 |a|| | 1 |
Nearside Rear Brake has no recorded effort at a wheel |1.2.1 |a| |ii|| | 1 |
Nearside Rear Brake lagging in operation |1.2.1 |d|| | 1 |
Rear Lower Suspension component pin or bush excessively worn suspension engine mounts/bearings |5.3.4 |a| |i|| | 1 |
Front Wheel alignment incorrect which adversely affects the handling fork bent |2.4 |a|| | 1 |
Front Wheel alignment incorrect which adversely affects the steering forks bent |2.4 |a|| | 1 |
Stop lamp remains on when the brake is released both brakes |1.3.1e| | 1 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies rear stop lamp |1.3.1a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies brake |1.3.1a| | 1 |
Headlamp at least one does not illuminate on main beam engine inop |1.2.2a|ii|| | 1 |
Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Dipswitch does not operate immediately when selected on dipped beam DIP AND MAIN SWAPPED |4.1.3 |b|| | 1 |
Dipswitch does not operate immediately when selected on main beam DIP AND MAIN SWAPPED |4.1.3 |b|| | 1 |
Front Steering headbearing in such a condition that steering control is adversely affected |2.2.2 |f| |ii|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Headlamp aim headlamp deteriorated and function impaired no pattern |1.2.3a| | 1 |
Throttle operating incorrectly sticks |6.2.1f| | 1 |
Rear Valve stem seriously damaged |5.2.3 |j|| | 1 |
All direction indicators adversely affected by the operation of another lamp |4.4.3 |b|| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Stop lamp does not illuminate immediately a brake applies REAR |1.3.1a| | 1 |
Offside Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Nearside Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Front Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Direction indicator not working all |1.5.1c| | 1 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Nearside Rear Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Exhaust mounting missing bolt missing / loose |7.1.1c| | 1 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
Front Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Front Lower Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
Handlebar deformed to the extent that steering is affected |2.2.1 |c| |ii|| | 1 |
Nearside Lower Motorcycle structure excessively damaged |6.1.1a| | 1 |
Fairing so located that it is likely to impede the steering |2.1.2e| | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Upper Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Headlamp aim not tested |1.6| | 1 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Rear shock absorber seal failed and leaking oil rear |2.4.A.1c| | 1 |
Direction indicators not working n/s front.o/s front. n/s rear. o/s rear |1.5.1c| | 1 |
Headlamp insecure front panel holding headlight insecure |4.1.1 |c|| | 1 |
Offside Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Stop lamp remains on when the brake is released control |1.3.1e| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies control |1.3.1a| | 1 |
Rear Exhaust mounting missing box loose and blowing |7.1.1c| | 1 |
Steering headbearing has excessive free play notchy steering head bearings |2.2.2| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Central Front Headlamp aim so that beam "kick up" is not visible on the screen |4.1.2 |a|| | 1 |
Front position lamp insecure Whole front fairing insecure |1.1.1c| | 1 |
Rear Brake component worn and seriously reduced in strength Brake disc |3.2.A1| | 1 |
All direction indicators not working correctly |4.4.1 |a| |ii|| | 1 |
Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
Front All direction indicators incorrect colour BOTH (4.4.3 (a)) | 1 |
Stop lamp not working FRONT & REAR (4.3.1 (a) (ii)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Rear Brake fluid contaminated (1.8 (a)) | 1 |
Rear Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 1 |
Rear Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Central Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Central Rear Upper Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Stop lamp not working (Possible Rear Brake Switch, Not Working When Brake Applied) (4.3.1 (a) (ii)) | 1 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear Brake component insecure (Flexible Brake Pipe Bracket Missing) (1.1.21 (c)) | 1 |
Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced centre stand dragging the ground [mounting cracked] (6.1.1 (b) (ii)) | 1 |
Vehicle identification number incomplete (0.2 (b)) | 1 |
Steering operation impeded by a leg shield (2.1.4 (e)) | 1 |
Wheel spindle or securing nut(s) so insecure that wheel security or steering control is adversely affected (5.2.1 (c) (ii)) | 1 |
Nearside Front Upper Stop lamp not working switch unit u/s - replaced (4.3.1 (a) (ii)) | 1 |
Rear Stop lamp not working front and rear stop light not working (4.3.1 (a) (ii)) | 1 |
Exhaust silencer insecure (8.1.1 (b) (i)) | 1 |
Front Stop lamp switch with a delay in operation (4.3.2 (a) (ii)) | 1 |
Front Brake disc significantly and obviously worn bent disk (1.1.14 (a) (i)) | 1 |
Rear Brake lever insecure (1.1.2 (e) (i)) | 1 |
Steering headbearing has excessive wear or free play Free Play (2.2.2 (f) (i)) | 1 |
Wheel alignment incorrect which adversely affects the steering handlebars bent (2.4 (a)) | 1 |
Steering operation impeded by a fairing (2.1.4 (e)) | 1 |
Front Wheel more than one fixing loose (5.2.1 (a) (ii)) | 1 |
Rear Wheel more than one fixing loose (5.2.1 (a) (ii)) | 1 |
Front Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Front Steering operation restricted in free movement from lock to lock (2.1.4 (c)) | 1 |
Rear Exhaust system insecure (6.1.2 (a)) | 1 |
Rear brake disc in such a condition that it is seriously weakened | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Nearside Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Nearside Rear Brake excessively binding (1.2.1 (f)) | 1 |
Front Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
Headlamp incorrect colour (4.1.4 (a)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Steering operation linkage fouling when handlebars turned from lock to lock (2.1.4 (a)) | 1 |
Rear Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Brake disc contaminated (1.1.14 (b)) | 1 |
Stop lamp not working front lever (4.3.1 (a) (ii)) | 1 |
Front Brake component insecure pad pin clip missing (1.1.21 (c)) | 1 |
All direction indicators light intensity significantly reduced (4.4.3 (a)) | 1 |
Front Motorcycle structure joining/attachment plate or fastening insecure speedo cover insecure (6.1.1 (b) (i)) | 1 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Front Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
Front Brake component insecure No locking device on brake pin (1.1.21 (c)) | 1 |
Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Engine mounting/bracket damaged or deteriorated resulting in excessive movement (6.1.8 (a) (i)) | 1 |
Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition leaking at barrel (8.1.1 (a)) | 1 |
Exhaust system insecure loose at barrel (6.1.2 (a)) | 1 |
Front Brake grabbing severely master cylinder piston needs lube (1.2.1 (c)) | 1 |
Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
Front Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
All position lamps not working (4.2.1 (a)) | 1 |