>

MOT History from tests of petrol YAMAHA YQ50s year 2010

Review the list of common YAMAHA YQ50 failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history
Pass percent:62.87%
(The average a petrol YAMAHA YQ50 year 2010 passes without issue)
Based on:1,705 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment76
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|73
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||72
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|66
Stop lamp does not illuminate immediately a brake applies |1.3.1a|47
Registration plate issues37
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||33
Exhaust is leaking and excessively noisey |7.1.1b|32
Steering movement excessively `notchy` with the wheel raised |2.2.1b|26
Rear shock absorber has inadequate damping effect. |2.4.A.3b|19
Horn not working |1.7.3a|17
Headlamp not working on dipped beam (4.1.1 (a) (ii))17
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|15
Rear reflector on motorcycle missing |1.4.1|15
Headlamp insecure |1.2.3b|12
Stop lamp remains on when the brake is released |1.3.1e|12
Front Stop lamp not working (4.3.1 (a) (ii))12
Rear Brake disc|s| excessively scored |3.2.A1l|11
Headlamp not working on dipped beam |4.1.1 |a| |ii||11
Rear Stop lamp not working (4.3.1 (a) (ii))11
Headlamp aim not tested |1.6|10
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||10
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|10
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|10
Stop lamp not working (4.3.1 (a) (ii))10
Throttle operating incorrectly |6.2.1f|9
Headlamp not working on main beam (4.1.1 (a) (ii))9
Front Brake disc|s| excessively worn |3.2.A1l|8
Riders seat insecure |6.2.1a|8
Front Brake disc|s| has excessive run out |3.2.A1m|8
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c|8
Rear wheel bearings have excessive free play |2.4.A.2c|8
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|8
Front Stop lamp not working |4.3.1 |a| |ii||8
Stop lamp remains on when the brakes are released8
Headlamp aim not tested (4.1.2 (b))8
Rear Stop lamp not working |4.3.1 |a| |ii||7
Headlamp not working on main beam |4.1.1 |a| |ii||7
Rear Brake disc|s| excessively worn |3.2.A1l|7
Front position lamp does not illuminate immediately when switched on |1.1.3a|6
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|6
Steering headbearing has excessive free play |2.2.2|6
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|6
Offside Front Direction indicator incorrect colour |1.5.1b|6
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|6
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|6
Offside Front Direction indicators not working |1.5.1c|6
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i))6
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b))6
Nearside Front Direction indicator not working |1.5.1c|5
Wheel alignment incorrect which adversely affects the steering |2.5.1|5
All direction indicators not working (4.4.1 (a) (ii))5
Rear Position lamp not working (4.2.1 (a))5
Rear Rear reflector missing (4.8.2 (a) (ii))5
Front Valve stem seriously damaged (5.2.3 (j))5
Rear Shock absorber has negligible damping effect (5.3.2 (b))5
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii))5
Horn not working (7.7 (a))5
Direction indicators not working |1.5.1c|4
Exhaust mounting does not fully support the exhaust system |7.1.1.c|4
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|4
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|4
Exhaust mounting missing |7.1.1c|4
Front Exhaust is leaking and excessively noisey |7.1.1b|4
Nearside Rear Direction indicator incorrect colour |1.5.1b|4
Front wheel bearings have excessive free play |2.3.5b|4
Offside Rear Direction indicator incorrect colour |1.5.1b|4
Nearside Front Direction indicators not working |1.5.1c|4
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a||4
Registration plate lamp issues4
Steering headbearing has excessive wear or free play (2.2.2 (f) (i))4
Rear Valve stem seriously damaged (5.2.3 (j))4
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a))4
Headlamp insecure (4.1.1 (c))4
Horn not working (7.7 (a) (ii))4
Front Headlamp not working on main beam (4.1.1 (a) (ii))4
Headlamp main beam affected by the operation of another lamp |1.2.2c|3
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b||3
Front mudguard insecure |2.3.7|3
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|3
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||3
Rear shock absorber seal failed and leaking oil |2.4.A.1c|3
Nearside Front shock absorber seal failed and leaking oil |2.3.3|3
Rear reflector missing |4.8.2 |a| |ii||3
Rear Brake lever has inadequate reserve travel |3.1.3b|3
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c|3
Rear Stop lamp remains on when the brake is released |1.3.1e|3
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|3
Offside Front Direction indicator damaged and function impaired |1.5.3a|3
Horn not working |7.7 |a| |ii||3
Headlamp aim headlamp deteriorated and function impaired |1.2.3a|3
Rear Position lamp not working |4.2.1 |a||3
Front Brake disc|s| is excessively distorted |3.2.A1m|3
Steering headbearing excessively stiff or notchy |2.2.2 |f| |i||3
Rear position lamp incorrect colour |1.1.2b|3
Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1|3
Rear Stop lamp damaged and function impaired |1.3.3a|3
Front Stop lamp remains on when the brake is released |1.3.1e|3
Nearside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))3
Nearside Front Direction indicator not working (4.4.1 (a) (ii))3
Front Brake disc contaminated (1.1.14 (b))3
Rear reflector missing (4.8.2 (a) (ii))3
Front Wheel spindle loose (5.2.1 (c) (i))3
Front Headlamp not working on dipped beam (4.1.1 (a) (ii))3
Headlamp aim projected beam image obviously incorrect (4.1.2 (c))3
Steering headbearing has excessive wear or free play |2.2.2 |f| |i||2
Exhaust has a major leak of exhaust gases |6.1.2 |a||2
Front shock absorber seal failed and leaking oil |2.3.3|2
Stop lamp not working |4.3.1 |a| |ii||2
Offside Handlebar handgrip not secure to handlebars. |2.1.1c|2
Rear Stop lamp affected by the operation of another lamp |1.3.2|2
Horn not loud enough to be heard by another road user |1.7.3a|2
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|2
Nearside Front Direction indicator incorrect colour |1.5.1b|2
Front Hydraulic brake control creeps under load. |3.1.4a|2
Nearside Front Direction indicator missing |1.5.1a|2
Offside Front Direction indicator missing |1.5.1a|2
Wheel alignment incorrect which adversely affects the handling |2.5.1|2
Front Fairings insecure and likely to impede the steering |2.1.2e|2
Front position lamp incorrect colour |1.1.2a|2
Nearside Rear Direction indicators not working |1.5.1c|2
Front Direction indicators affected by the operation of another lamp |1.5.1c|2
Offside Direction indicator not working |1.5.1c|2
Front Direction indicator incorrect colour |1.5.1b|2
Handlebar deformed |2.1.1b|2
Indicator tell tale not functioning |1.5.2|2
Rear Stop lamp does not emit a steady light |1.3.1b|2
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a|2
Nearside Front Direction indicator missing |4.4.1 |a| |ii||2
Offside Front Direction indicator missing |4.4.1 |a| |ii||2
Front wheel bearings are excessively rough |2.3.5b|2
Front Floor brake test indicates a binding brake |3.3.C2c|2
Headlamp aim not tested |4.1.2 |b||2
Rear Brake disc significantly and obviously worn |1.1.14 |a| |i||2
Nearside Rear Direction indicator incorrect colour |4.4.3 |a||2
Offside Rear Direction indicator incorrect colour |4.4.3 |a||2
Stop lamp emits other than a steady red light |1.3.1b|2
Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b||2
Front Roller brake test indicates a binding brake |3.3.A1a|2
Offside Front Direction indicator not working |1.5.1c|2
Fairings insecure and likely to impede the steering |2.1.2e|2
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|2
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i||2
Nearside Rear Direction indicator insecure |1.5.3b|2
Rear Brake lever insecure |3.1.2a|2
Rear position lamp adversely affected by the operation of another lamp |1.1.3b|2
Nearside Direction indicators flashing more than 120 times per minute |1.5.1c|2
Offside Direction indicators flashing more than 120 times per minute |1.5.1c|2
Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c|2
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|2
Offside Rear Direction indicators flashing less than 60 times a minute |1.5.1c|2
Footrest insecure |6.2.1a|2
Fuel system component leaking |7.2.1a|2
Front Brake disc|s| excessively scored |3.2.A1l|2
Direction indicators affected by the operation of another lamp |1.5.1c|2
Offside Handlebar grip insecure to handlebar (2.2.1 (d) (ii))2
Offside Front Direction indicator not working (4.4.1 (a) (ii))2
Riders seat insecure (6.2.5 (a) (ii))2
Front Headlamp insecure (4.1.1 (c))2
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b))2
Front Shock absorber has a serious fluid leak (5.3.2 (b))2
Front Brake disc significantly and obviously worn (1.1.14 (a) (i))2
Exhaust has a major leak of exhaust gases (6.1.2 (a))2
Headlamp light intensity severely reduced (4.1.4 (a))2
Rear Brake lever has insufficient reserve travel (1.1.2 (a))2
All direction indicators incorrect colour (4.4.3 (a))2
Dipswitch does not operate immediately when selected on dipped beam (4.1.3 (b))2

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy