Most common failures | No# failures |
---|
Steering headbearing has excessive free play |2.2.2| | 32 |
Headlamp aim out of alignment | 26 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 25 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 20 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 18 |
Horn not working |1.7.3a| | 14 |
Exhaust is leaking and excessively noisey |7.1.1b| | 14 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 12 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 11 |
Front Steering headbearing has excessive free play |2.2.2| | 11 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 9 |
Registration plate issues | 8 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 7 |
Front wheel bearings are excessively rough |2.3.5b| | 7 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 6 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 6 |
Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
Indicator tell tale not functioning |1.5.2| | 6 |
Rear Brake disc|s| excessively scored |3.2.A1l| | 5 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Offside Rear Direction indicator not working |1.5.1c| | 4 |
An item not tested |Manual| | 4 |
Headlamp insecure |1.2.3b| | 4 |
Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 4 |
Offside Front Direction indicator not working |1.5.1c| | 4 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 4 |
Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 4 |
Front position lamp incorrect colour |1.1.2a| | 3 |
Direction indicator not working |1.5.1c| | 3 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 3 |
Throttle operating incorrectly |6.2.1f| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Stop lamp remains on when the brake is released |1.3.1e| | 3 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 3 |
Rear Direction indicator incorrect colour |1.5.1b| | 3 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 3 |
Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Rear Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 2 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 2 |
Fairing insecure and likely to impede the steering |2.1.2e| | 2 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front Front position lamp incorrect colour |1.1.2a| | 2 |
Stop lamp does not emit a steady light |1.3.1b| | 2 |
Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Stop lamp affected by the operation of another lamp |1.3.2| | 2 |
Nearside Front Direction indicator incorrect colour |1.5.1b| | 2 |
Nearside Front Direction indicator not working |1.5.1c| | 2 |
Fairings insecure and likely to impede the steering |2.1.2e| | 2 |
Front Fairing so located that it is likely to impede the steering |2.1.2e| | 2 |
Front Horn not working |1.7.3a| | 2 |
Headlamp switch faulty |1.2.4| | 2 |
Stop lamp emits other than a steady red light |1.3.1b| | 2 |
Headlamp aim not tested |1.6| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 2 |
Front Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
Rear Brake pipe likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Front Brake hose leaking fluid |3.2.B4| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Front Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
Front mudguard insecure |2.3.7| | 1 |
Front Brake disc|s| insecure |3.2.A1g| | 1 |
Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Rear Direction indicator incorrect colour |4.4.3 |a|| | 1 |
Stop lamp remains on when the brakes are released | 1 |
Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Rear Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Front Direction indicator not working |1.5.1c| | 1 |
Rear Direction indicator not working |1.5.1c| | 1 |
Headlamp switch insecure |1.2.4| | 1 |
Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
Nearside Front Motorcycle structure cracked |6.1.1a| | 1 |
Offside Front Motorcycle structure cracked |6.1.1a| | 1 |
Front Headlamp incorrect colour |1.2.1| | 1 |
Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Offside Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
Steering movement excessively rough with the wheel raised |2.2.1b| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Outer Front Upper Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Rear position lamp insecure |1.1.1c| | 1 |
Offside Front Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
Nearside Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Direction indicators flashing less than 60 times a minute no flash |1.5.1c| | 1 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Motorcycle structure excessively damaged |6.1.1a| | 1 |
Offside Motorcycle structure excessively damaged |6.1.1a| | 1 |
Headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Lower Exhaust has part of the system missing |7.1.1a| | 1 |
Handlebar deformed |2.1.1b| | 1 |
Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Direction indicator missing |1.5.1a| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Front Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
Upper Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Exhaust excessively deteriorated |7.1.1a| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Upper Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Rear Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
Nearside Rear Footrest insecure |6.2.1a| | 1 |
Nearside Direction indicator not working |1.5.1c| | 1 |
Front wheel spindle loose |2.3.3a| | 1 |
Front Front position lamp insecure |1.1.1c| | 1 |
Front Upper Motorcycle structure excessively damaged |6.1.1a| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
Upper Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Front Horn control not functioning. |1.7.2b| | 1 |
Rear Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Centre Rear Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Centre Front Upper Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Horn sounds harsh or grating |1.7.3c| | 1 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Offside Direction indicator not working |1.5.1c| | 1 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
Front Upper Steering headbearing has excessive free play |2.2.2| | 1 |
Lower Steering headbearing has excessive free play |2.2.2| | 1 |
Rear Stop lamp flickers when tapped lightly by hand |1.3.1d| | 1 |
Offside Front Position lamp switch faulty |1.1.4a| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Front Direction indicator obscured |1.5.1a| | 1 |
Direction indicator incorrect colour |1.5.1b| | 1 |
Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Rear Brake lever mounting cracked |3.1.2c| | 1 |
Offside Front Direction indicator deteriorated and function impaired |1.5.3a| | 1 |
Nearside Front An item not tested |Manual| | 1 |
Front An item not tested |Manual| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Centre Front Lower Fairing insecure and likely to impede the steering |2.1.2e| | 1 |
Hydraulic brake control feels spongy |3.1.4a| | 1 |
Centre Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Nearside Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Dipswitch does not extinquish main beam/s, leaving at least 1 dipped beam headlamp |1.2.2b|i|| | 1 |
Horn control defective |1.7.2a| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
Front suspension assembly component excessively bent |2.3.1| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Front suspension has inadequate damping effect. |2.3.6c| | 1 |
Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Footrest insecure |6.2.1a| | 1 |
Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
Offside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Brake performance not tested |3.3| | 1 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Offside Front Direction indicators not working |1.5.1c| | 1 |
Position lamp switch insecure |1.1.4b| | 1 |
Brake lever cannot be applied smoothly |3.1.3d| | 1 |
Front Brake lever pivots excessively worn |3.1.3a| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Nearside Front position lamp incorrect colour |1.1.2a| | 1 |
Offside Front position lamp incorrect colour |1.1.2a| | 1 |
Front Motorcycle structure excessively distorted |6.1.1a| | 1 |
Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Front Headlamp not working on main beam High-low switch missing |4.1.1 |a| |ii|| | 1 |
Nearside Motorcycle structure joining/attachment plate or fastening insecure Side stand mounting loose |6.1.1 |b| |i|| | 1 |
Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Rear Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Registration plate lamp issues | 1 |
Horn not working (7.7 (a) (ii)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Direction indicator obviously incorrectly positioned both (4.4.3 (a)) | 1 |