Most common failures | No# failures |
---|
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 22 |
Headlamp aim out of alignment | 20 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 17 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 15 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 11 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 7 |
Registration plate issues | 7 |
Horn not working |1.7.3a| | 6 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 5 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Front Fairings insecure and likely to impede the steering |2.1.2e| | 4 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 4 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Rear reflector on motorcycle missing |1.4.1| | 3 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
Horn not working |7.7 |a| |ii|| | 3 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 3 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 3 |
Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 3 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
Exhaust system insecure |6.1.2 |a|| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Stop lamp emits other than a steady red light |1.3.1b| | 2 |
Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Registration plate lamp issues | 2 |
Exhaust mounting missing |7.1.1c| | 2 |
Stop lamp not working |4.3.1 |a| |ii|| | 2 |
Direction indicators not working |1.5.1c| | 2 |
Nearside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Offside Rear Direction indicator incorrect colour |1.5.1b| | 2 |
Headlamp not working on main beam |4.1.1 |a| |ii|| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 2 |
Stop lamp not working (4.3.1 (a) (ii)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Rear Brake fluid reservoir fluid not visible (1.1.10 (d) (iii)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Brake performance not tested |3.3| | 1 |
Stop lamp not working off front lever faulty switch |4.3.1 |a| |ii|| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear Stop lamp not working left rear lever switch not working |4.3.1 |a| |ii|| | 1 |
Stop lamp emits other than a steady red light front switch |1.3.1b| | 1 |
Front Front position lamp incorrect colour Does not work |1.1.2a| | 1 |
Rear Front position lamp incorrect colour Does not work |1.1.2a| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Fuel pipe insecure |6.1.3 |a| |i|| | 1 |
Riders seat insecure |6.2.5 |a| |ii|| | 1 |
Brake component insecure front to rear brake pipe |1.1.21 |c|| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Nearside Brake master cylinder severely damaged |3.2.B1b| | 1 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Front Brake disc|s| is excessively distorted |3.2.A1m| | 1 |
Stop lamp remains on when the brake is released with rear lever |1.3.1e| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Rear Direction indicator insecure |1.5.3b| | 1 |
Front Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 1 |
Nearside Motorcycle structure excessively damaged |6.1.1a| | 1 |
Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Rear Wheel has an excessively distorted bead rim. |4.2.2| | 1 |
Offside Front Direction indicator incorrect colour |1.5.1b| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Rear suspension component loose |2.4.A.1a| | 1 |
Rear Direction indicator lens defective such that the emitted light is adversely affected L/H |4.4.1 |b| |ii|| | 1 |
Horn control not functioning. |1.7.2b| | 1 |
Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
Brake disc|s| excessively worn |3.2.A1l| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Stop lamp affected by the operation of another lamp rear position lamp brighter than stop lamp. |1.3.2| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Headlamp aim beam image kick up to the offside |1.6| | 1 |
Nearside Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
Nearside Rear Direction indicator damaged and function impaired |1.5.3a| | 1 |
Rear wheel rotation likely to be impeded rear fender insecure |6.2.1b| | 1 |
Rear Brake lever insecure |3.1.2a| | 1 |
Rear Brake lever attachment screws loose |3.1.2b| | 1 |
Stop lamp does not illuminate immediately a brake applies Both |1.3.1a| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Rear wheel insecure |4.2.3b| | 1 |
Front Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 1 |
Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Wheel fractured |5.2.2 |a|| | 1 |
Rear Wheel fractured |5.2.2 |a|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Stop lamp not working Rear brake lever. |4.3.1 |a| |ii|| | 1 |
Rear Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Rear Brake lever has insufficient reserve travel |1.1.2 |a|| | 1 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Headlamp aim not tested |1.6| | 1 |
Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
Brake component insecure Front and Rear brake pins missing retaining C clips |1.1.21 |c|| | 1 |
Front Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Rear Brake master cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Rear Brake pipe inadequately supported |3.2.B2b| | 1 |
Offside Front Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Front Direction indicator missing |1.5.1a| | 1 |
Nearside Rear Direction indicator missing |1.5.1a| | 1 |
Nearside Front Direction indicator missing |1.5.1a| | 1 |
Rear Brake cylinder leaking hydraulic fluid |3.2.B1e| | 1 |
Front position lamp does not illuminate immediately when switched on dip beam |1.1.3a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
Rear Wheel fixing loose (single fixing) (5.2.1 (a) (ii)) | 1 |
Stop lamp not working from rear brake (4.3.1 (a) (ii)) | 1 |
Offside Front Direction indicator obviously incorrectly positioned insecure (4.4.3 (a)) | 1 |
Riders seat insecure (6.2.5 (a) (ii)) | 1 |
Front Brake fluid reservoir fluid level significantly below minimum level (1.1.10 (d) (ii)) | 1 |
Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
Rear Brake component insecure Brake hose (1.1.21 (c)) | 1 |
Front All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Rear All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
Rear Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Front Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
Nearside Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake excessively binding (1.2.1 (f)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Shock absorber has negligible damping effect (5.3.2 (b)) | 1 |
Rear Suspension attachment bracket/mounting insecure all bushes (5.3.3 (a) (i)) | 1 |
Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Nearside Footrest missing (6.2.12 (a)) | 1 |
Offside Footrest missing (6.2.12 (a)) | 1 |
Offside Rear Motorcycle structure joining/attachment plate or fastening insecure (6.1.1 (b) (i)) | 1 |
Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Rear Brake fluid not visible (1.1.10 (d) (iii)) | 1 |
Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Nearside Front All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Offside Front All direction indicators missing (4.4.1 (a) (ii)) | 1 |
Central Front Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Central Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
Offside Front Brake cylinder insecurely mounted and braking performance affected FRONT BAKE MASTER AND LEVER LOOSE FITTING (1.1.16 (c) (ii)) | 1 |
Rear Brake disc significantly and obviously worn (1.1.14 (a) (i)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |