| Most common failures | No# failures |
|---|
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 35 |
| Headlamp aim out of alignment | 30 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 23 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 18 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 15 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 12 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 11 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 10 |
| Steering headbearing has excessive free play |2.2.2| | 8 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 8 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 7 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Registration plate issues | 6 |
| Throttle operating incorrectly |6.2.1f| | 6 |
| Stop lamp remains on when the brake is released |1.3.1e| | 5 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 5 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 5 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 5 |
| Rear Brake disc|s| excessively worn |3.2.A1l| | 4 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Front wheel bearings are excessively rough |2.3.5b| | 4 |
| Horn not working |1.7.3a| | 4 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 3 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 3 |
| Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Offside Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Handlebar mounting clamp loose |2.1.1a| | 2 |
| Handlebar mounting clamp bolt loose |2.1.1a| | 2 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 2 |
| Registration plate lamp issues | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Front Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Fuel cap does not fasten securely by a positive means |7.2.2b| | 2 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 2 |
| Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 2 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Stop lamp remains on when the brakes are released | 2 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Rear Exhaust mounting missing |7.1.1c| | 1 |
| Offside Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
| Offside Steering lock stop ineffective |2.1.3| | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Front Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Nearside Front Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Nearside Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Nearside Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Centre Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Nearside Headlamp incorrect colour |1.2.1| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear Seat insecure |6.2.1a| | 1 |
| Offside Front Position lamp switch insecure |1.1.4b| | 1 |
| Fuel cap sealing washer torn |7.2.2c| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Rear suspension component loose |2.4.A.1a| | 1 |
| Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Front Brake lever attachment screws loose |3.1.2b| | 1 |
| Rear Brake lever attachment screws loose |3.1.2b| | 1 |
| Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Lower Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Offside Front Direction indicators not working |1.5.1c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Front Direction indicator not working |1.5.1c| | 1 |
| Rear Direction indicator not working |1.5.1c| | 1 |
| Offside Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Front Upper Position lamp switch insecure |1.1.4b| | 1 |
| Nearside Rear Upper Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Rear Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Front Plate brake test indicates a binding brake |3.3.B1a| | 1 |
| Nearside Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Offside Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock slackened cable routed wrongly very tight on both steering locks. |2.1.4| | 1 |
| Nearside Front Horn not working |1.7.3a| | 1 |
| Nearside Front Dipswitch does not deflect the main beam/s, making them into dipped beam/s does not dip on low beam no beam on light tester. |1.2.2b|ii|| | 1 |
| Outer Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Front Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Nearside Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Offside Rear Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Nearside Front Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Lower Exhaust mounting missing |7.1.1c| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Front Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Nearside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake lever |1.3.1a| | 1 |
| Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking front mudguard insecure and damaged |6.1.1c| | 1 |
| Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake component is severely distorted |3.1.5| | 1 |
| Front Direction indicators not working N/S AND O/S |1.5.1c| | 1 |
| Stop lamp does not illuminate immediately a brake applies FRONT AND REAR |1.3.1a| | 1 |
| Horn control not functioning. INTERMITTENT |1.7.2b| | 1 |
| Front Brake grabbing severely |1.2.1 |c|| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Headlamp switch faulty |1.2.4| | 1 |
| Rear Front mudguard insecure |2.3.7| | 1 |
| Front Handlebar deformed |2.1.1b| | 1 |
| Front Front mudguard insecure |2.3.7| | 1 |
| Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Rear Brake cylinder severely corroded |3.2.B1b| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen |1.6.B.1| | 1 |
| Rear position lamp adversely affected by the operation of another lamp indicators |1.1.3b| | 1 |
| Stop lamp does not illuminate immediately a brake applies rear brake |1.3.1a| | 1 |
| Rear Brake hose fouling |3.2.B3b| | 1 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear reflector on motorcycle missing |1.4.1| | 1 |
| Headlamp dipped beam flickers when tapped lightly by hand |1.2.2c| | 1 |
| Inner Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Offside Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Nearside Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Headlamp main beam affected by the operation of another lamp |1.2.2c| | 1 |
| Nearside Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Front Stop lamp not working brake |4.3.1 |a| |ii|| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies brake |1.3.1a| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Nearside Indicator tell tale not operating correctly |1.5.2| | 1 |
| Rear Hydraulic brake control feels spongy brake |3.1.4a| | 1 |
| Offside Front Direction indicator flashing more than 120 times per minute |1.5.1c| | 1 |
| Indicator tell tale not operating correctly |1.5.2| | 1 |
| Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Lower Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear Upper Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear Brake component is fractured |3.1.5| | 1 |
| Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Rear Brake component is excessively corroded |3.1.5| | 1 |
| Position lamp switch insecure |1.1.4b| | 1 |
| Front wheel spindle loose |2.3.5a| | 1 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Front Stop lamp switch with a delay in operation |4.3.2 |a| |ii|| | 1 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Exhaust mounting missing clamp corroded |7.1.1c| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride rear fender bolt missing |6.2.1h| | 1 |
| Nearside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Front Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Nearside Rear Upper Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced shock absorber frame mount significantly corroded (6.1.1 (c) (i)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Front Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Front Brake has no recorded effort at a wheel (1.2.1 (a) (ii)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Rear Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Rear Brake excessively binding (1.2.1 (f)) | 1 |
| Headlamp aim not tested as LEDs fitted (4.1.2 (b)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Front wheel bearings have excessive free play (2.3.5b) | 1 |