| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 35 |
| Rear Brake lever has inadequate reserve travel |3.1.3b| | 23 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 22 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 16 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 14 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 13 |
| Steering headbearing has excessive free play |2.2.2| | 12 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 10 |
| Rear reflector on motorcycle obscured |1.4.1| | 8 |
| Rear reflector on motorcycle missing |1.4.1| | 8 |
| Registration plate issues | 8 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 8 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 5 |
| Horn not working |1.7.3a| | 5 |
| Indicator tell tale not functioning |1.5.2| | 4 |
| Headlamp aim beam image kick up to the offside |1.6| | 4 |
| Headlamp insecure |1.2.3b| | 4 |
| Riders seat insecure |6.2.1a| | 3 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
| Nearside Front Direction indicators not working |1.5.1c| | 3 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 3 |
| Headlamp aim not tested |1.6| | 3 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
| Exhaust excessively deteriorated |7.1.1a| | 3 |
| Nearside Front Direction indicator not working |1.5.1c| | 3 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Offside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Horn not working |1.7.3a| | 2 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 2 |
| Handlebar deformed |2.1.1b| | 2 |
| Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
| Front mudguard insecure |2.3.7| | 2 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 2 |
| Fuel hose leaking |7.2.1a| | 2 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Nearside Rear Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Offside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Rear Stop lamp damaged and function impaired |1.3.3a| | 2 |
| Registration plate lamp issues | 2 |
| Nearside Rear Direction indicator not working |1.5.1c| | 2 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
| Centre Rear Upper Riders seat insecure |6.2.1a| | 1 |
| Offside Front Steering lock stop missing |2.1.3| | 1 |
| Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Handlebar mounting clamp loose |2.1.1a| | 1 |
| Rear Brake linkage has abnormal movement due to excessive wear |3.2.A1i| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Front Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
| Rear Brake lever is so short and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
| Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Indicator switch defective |1.5.4| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Nearside Front Upper Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Upper Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Front Lower Headlamp insecure |1.2.3b| | 1 |
| Rear Brake lever is damaged and the brake cannot be readily applied |3.1.3c| | 1 |
| Rear wheel has a loose wheel nut|s| |4.2.3a| | 1 |
| Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 1 |
| Steering movement excessively rough with the weight on the lower bearing |2.2.1a| | 1 |
| Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Front Brake component worn and seriously reduced in strength |3.2.A1| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Decelerometer brake test the less effective brake control does not achieve an efficiency of 25%. |3.3.E1b| | 1 |
| Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Fuel system component leaking |7.2.1a| | 1 |
| Stop lamp does not illuminate immediately a brake applies NOT WORKING |1.3.1a| | 1 |
| Fairings insecure and likely to impede the steering |2.1.2e| | 1 |
| Fairings so located that it is likely to impede the steering |2.1.2e| | 1 |
| Rear Rear reflector on motorcycle obscured |1.4.1| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front Stop lamp deteriorated and function impaired |1.3.3a| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Nearside Brake lever insecure |3.1.2a| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Offside Front Upper All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
| Headlamp not working on main beam |4.1.1 |a| |ii|| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Exhaust mounting missing |7.1.1c| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Brake lever insecure |3.1.2a| | 1 |
| Front Stop lamp missing |1.3.3a| | 1 |
| Rear position lamp missing |1.1.1a| | 1 |
| Offside Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Rear Stop lamp missing |1.3.3a| | 1 |
| Offside Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
| Front Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Rear Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
| Nearside Direction indicators not working |1.5.1c| | 1 |
| Handlebar mounting so insecure that steering is adversely affected |2.2.1 |a| |ii|| | 1 |
| Nearside Front Front suspension assembly component excessively bent |2.3.1| | 1 |
| Offside Front Front suspension assembly component excessively bent |2.3.1| | 1 |
| Nearside Front Fork yoke deformed |2.1.1b| | 1 |
| Offside Front Fork yoke deformed |2.1.1b| | 1 |
| Nearside Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Offside Front Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Nearside Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Offside Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Rear Brake lever mounting insecure |3.1.2a| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Nearside Rear Footrest insecure |6.2.1a| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Dipswitch does not deflect the main beam/s, making them into dipped beam/s |1.2.2b|ii|| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Rear Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Rear Brake pedal is inoperative |3.1.3c| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| An item not tested |Manual| | 1 |
| Front Headlamp dipped beam affected by the operation of the horn |1.2.2c| | 1 |
| Front Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Horn sounds harsh or grating |1.7.3c| | 1 |
| Front Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| All direction indicators not working (4.4.1 (a) (ii)) | 1 |
| Stop lamp not working From front brake (4.3.1 (a) (ii)) | 1 |
| Nearside Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Brake excessively binding (1.2.1 (f)) | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Rear Valve stem seriously damaged (5.2.3 (j)) | 1 |
| Front Position lamp not working (4.2.1 (a)) | 1 |
| Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
| Throttle operating incorrectly (6.2.7 (a) (i)) | 1 |
| Horn sound not in accordance with requirements AFFECTED BY OTHER EQUIPMENT (7.7 (c)) | 1 |
| All direction indicators adversely affected by the operation of another lamp AND OTHER EQUIPMENT (4.4.3 (b)) | 1 |
| Indicator switch inoperative not working properly when turning on right indicaters (4.4.2 (a) (ii)) | 1 |