Most common failures | No# failures |
---|
Registration plate issues | 67 |
Headlamp aim out of alignment | 46 |
Rear reflector on motorcycle missing |1.4.1| | 33 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 27 |
Parking brake: efficiency below requirements |3.7.C.1b| | 17 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 17 |
Steering headbearing has excessive free play |2.2.2| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 12 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Parking brake efficiency below requirements |3.7.C.1b| | 8 |
Nearside Rear Direction indicator not working |1.4.A.2c| | 8 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 8 |
Horn not working |1.7.3a| | 8 |
Horn not working |1.6.2a| | 7 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 7 |
Exhaust is leaking and excessively noisey |7.1.1b| | 7 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 7 |
Registration plate lamp issues | 6 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 6 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 6 |
Rear Rear reflector missing |1.5.1a| | 5 |
Centre Rear reflector missing |1.5.1a| | 5 |
Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 5 |
Drive chain worn to excess |6.2.1e| | 5 |
Drive chain excessively tight |6.2.1d| | 5 |
Headlamp insecure |1.2.3b| | 5 |
Rear reflector missing (4.8.2 (a) (ii)) | 5 |
Parking brake efficiency less than 50% of the required value (1.4.2 (a) (ii)) | 5 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
Parking brake: efficiency below requirements |3.7.B.7| | 4 |
Direction indicators not working |1.5.1c| | 4 |
Drive chain excessively loose |6.2.1d| | 4 |
Front wheel bearings are excessively rough |2.3.5b| | 4 |
Parking brake lever has no reserve travel |3.1.6b| | 4 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 4 |
Parking brake efficiency below requirements |3.7.B.7| | 4 |
Offside Rear Direction indicator not working |1.4.A.2c| | 4 |
Rear Brake lever has inadequate reserve travel |3.1.3b| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Hazard warning tell tale not working correctly |1.4.B.1e| | 4 |
Nearside Headlamp not working on dipped beam |1.7.5a| | 3 |
Offside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 3 |
Nearside Rear Direction indicators not working |1.4.A.2c| | 3 |
Offside Rear Direction indicators not working |1.4.A.2c| | 3 |
Direction indicators not working |1.4.A.2c| | 3 |
Obligatory mirror missing |8.1.1| | 3 |
Front Drive chain sprocket worn to excess |6.2.1e| | 3 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 3 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 3 |
Rear position lamp incorrect colour |1.1.2b| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 3 |
Service brake: efficiency below requirements |3.7.C.1a| | 3 |
Nearside Rear reflector missing |1.5.1a| | 3 |
Offside Rear reflector missing |1.5.1a| | 3 |
Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Stop lamp remains on when the brakes are released | 3 |
Centre Rear position lamp|s| not working |1.1.A.3b| | 3 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 3 |
Drive chain excessively loose (6.1.7 (c) (i)) | 3 |
Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 2 |
Nearside Front Upper Suspension arm has excessive play in a pin/bush |2.4.G.2| | 2 |
Indicator tell tale missing |1.4.A.2a| | 2 |
Indicator tell tale inoperative |1.4.A.2a| | 2 |
Front Headlamp not working on main beam |1.7.5a| | 2 |
Offside Front Steering locking device missing |2.2.C.1g| | 2 |
Nearside Rear Rear wheel bearing has excessive play |2.6.2| | 2 |
Offside Headlamp not working on main beam |1.7.5a| | 2 |
Headlamp not working on main beam |1.7.5a| | 2 |
Hazard warning lamps not flashing in phase, with ignition on |1.4.B.1f| | 2 |
Hazard warning lamps not flashing in phase, with ignition off |1.4.B.1f| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
Front wheel spindle loose |2.3.5a| | 2 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 2 |
Nearside Stop lamp not working |1.2.1b| | 2 |
Rear reflector on motorcycle obscured |1.4.1| | 2 |
Rear Brake disc|s| excessively worn |3.2.A1l| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 2 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
Stop lamp emits other than a steady red light |1.3.1b| | 2 |
Nearside Rear Direction indicator not working |1.5.1c| | 2 |
Offside Rear Direction indicator deteriorated and function impaired |1.5.3a| | 2 |
Front wheel bearings have excessive free play |2.3.5b| | 2 |
Front Brake disc|s| excessively worn |3.2.A1l| | 2 |
Clutch lever bent so it cannot be readily operated. |6.2.1g| | 2 |
Brake lever is bent and the brake cannot be readily applied |3.1.3c| | 2 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Exhaust excessively deteriorated |7.1.1a| | 2 |
Headlamp aim not tested |1.6| | 2 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
Steering control has Insufficient clearance at full lock affecting the riders grasp of handlebars |2.1.2b| | 2 |
Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Direction indicator flashing more than 120 times per minute |1.5.1c| | 2 |
Indicator switch defective |1.5.4| | 2 |
Horn not working |7.7 |a| |ii|| | 2 |
Plate brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.B2b| | 2 |
Headlamp not working on dipped beam |1.7.5a| | 2 |
All position lamps not working |1.1.A.3b| | 2 |
Parking brake lever is located so that it cannot be satisfactorily operated from the driver`s seat |3.1.3c| | 2 |
Offside Rear Wheel insecure |4.2.A.1c| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front position lamp incorrect colour |1.1.2a| | 2 |
Centre Front position lamp|s| not working |1.1.A.3b| | 2 |
Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 2 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 2 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
Nearside Rear Wheel insecure |4.2.A.1c| | 2 |
Nearside Steering lock stop missing |2.1.3| | 2 |
Front mudguard insecure |2.3.7| | 2 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 2 |
Offside Rear Direction indicators not working |1.5.1c| | 2 |
Offside Stop lamp not working |1.2.1b| | 2 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 2 |
Nearside Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Nearside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
Offside Front Headlamp not in good working order adversely affecting beam image |1.2.4a| | 2 |
Centre Stop lamp not working |1.2.1b| | 2 |
Offside rear brake recording little or no effort |3.7.B.5a| | 2 |
Nearside Obligatory mirror missing |8.1.1| | 2 |
Offside Obligatory mirror missing |8.1.1| | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Parking brake lever missing (1.1.6 (d)) | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Offside Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 2 |
Parking brake lever has excessive movement indicating incorrect adjustment (1.1.6 (c)) | 2 |