>

MOT History from tests of petrol YAMAHA YAMAHAs year 1989

Review the list of common YAMAHA YAMAHA failures below or to perform a specific mot history check on your YAMAHA then use our popular KnowYourCar service

mot history
Pass percent:73.96%
(The average a petrol YAMAHA YAMAHA year 1989 passes without issue)
Based on:5,361 MOT Tests
Most common failuresNo# failures
Headlamp aim out of alignment238
Rear reflector on motorcycle missing |1.4.1|153
Horn not working |1.7.3a|89
Registration plate issues89
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a|61
Stop lamp does not illuminate immediately a brake applies |1.3.1a|57
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a|53
Steering headbearing has excessive free play |2.2.2|47
Front position lamp does not illuminate immediately when switched on |1.1.3a|43
Drive chain excessively loose |6.2.1d|42
Nearside Front shock absorber seal failed and leaking oil |2.3.3|41
Rear Rear reflector on motorcycle missing |1.4.1|37
Front Roller brake test indicates a binding brake |3.3.A1a|36
Exhaust is leaking and excessively noisey |7.1.1b|34
Rear Roller brake test indicates a binding brake |3.3.A1a|33
Offside Front shock absorber seal failed and leaking oil |2.3.3|32
Front wheel bearings have excessive free play |2.3.5b|31
Rear wheel bearings have excessive free play |2.4.A.2c|30
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|29
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||26
Rear wheel spindle securing nut locking device missing |2.4.A.2b|25
Throttle operating incorrectly |6.2.1f|25
Offside Front Front shock absorber seal failed and leaking oil |2.3.3|25
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b|23
Horn not loud enough to be heard by another road user |1.7.3a|22
Front Brake lever has inadequate reserve travel |3.1.3b|22
Steering movement excessively `notchy` with the wheel raised |2.2.1b|22
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c|22
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|21
Rear shock absorber has inadequate damping effect. |2.4.A.3b|21
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3|21
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2|20
Direction indicators not working |1.5.1c|19
Rear suspension bush has excessive free play |2.4.A2a|i||19
Front shock absorber seal failed and leaking oil |2.3.3|18
Wheel alignment incorrect which adversely affects the handling |2.5.1|17
Nearside Rear Direction indicator not working |1.5.1c|16
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|16
Drive chain excessively tight |6.2.1d|16
Headlamp aim beam image kick up to the offside |1.6|15
Drive chain worn to excess |6.2.1e|15
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a|14
Front Horn not working |1.7.3a|14
Front Steering headbearing has excessive free play |2.2.2|14
Direction indicators flashing more than 120 times per minute |1.5.1c|14
Front wheel bearings are excessively rough |2.3.5b|13
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4|13
Rear Drive chain sprocket worn to excess |6.2.1e|13
Nearside Front Direction indicator not working |1.5.1c|13
Offside Rear Direction indicator not working |1.5.1c|12
Front Floor brake test indicates a binding brake |3.3.C2c|12
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|12
Offside Rear Direction indicators not working |1.5.1c|12
Headlamp at least one does not illuminate on main beam |1.2.2a|ii||12
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d|11
Direction indicators affected by the operation of another lamp |1.5.1c|11
Rear mono-shock pivot excessively worn |2.4.B.4|11
Front Front shock absorber seal failed and leaking oil |2.3.3|11
Riders seat insecure |6.2.1a|11
Front Wheel spoke excessively loose |4.2.1b|11
Rear Rear wheel bearings have excessive free play |2.4.A.2c|11
Rear Brake disc|s| cracked |3.2.A1g|10
Stop lamp affected by the operation of another lamp |1.3.2|9
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b|9
Stop lamp remains on when the brake is released |1.3.1e|9
Rear Wheel spoke excessively loose |4.2.1b|9
Offside Front Direction indicator not working |1.5.1c|9
Rear Brake locking device missing |3.2.A1e|9
Fuel system component leaking |7.2.1a|9
Exhaust mounting does not fully support the exhaust system |7.1.1.c|9
Front Front wheel bearings have excessive free play |2.3.5b|9
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b|9
Wheel alignment incorrect which adversely affects the steering |2.5.1|8
Front wheel spindle securing nut locking device missing |2.3.5a|8
Front Direction indicators not working |1.5.1c|8
Front Brake disc|s| excessively worn |3.2.A1l|8
Front Front position lamp does not illuminate immediately when switched on |1.1.3a|8
Direction indicators flashing less than 60 times a minute |1.5.1c|8
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a|8
Headlamp aim not tested |1.6|7
Front Hydraulic brake control feels spongy |3.1.4a|7
Offside Footrest insecure |6.2.1a|7
Headlamp insecure |1.2.3b|7
Front Exhaust is leaking and excessively noisey |7.1.1b|7
Rear Drive chain excessively loose |6.2.1d|7
Nearside Front Footrest insecure |6.2.1a|7
Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i||7
Front suspension has inadequate damping effect. |2.3.6c|7
Rear suspension bearing has excessive free play |2.4.A2a|i||7
All position lamps do not illuminate immediately when switched on |1.1.3a|7
Rear suspension movement is excessively stiff |2.4.A.3b|7
Offside Front Footrest insecure |6.2.1a|7
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii||7
Rear reflector missing (4.8.2 (a) (ii))7
Fuel tank leaking |7.2.1a|6
Rear Drive chain worn to excess |6.2.1e|6
Rear Footrest missing |6.2.1a|6
Nearside Front Direction indicators not working |1.5.1c|6
Steering movement excessively stiff with the wheel raised |2.2.1b|6
Rear Direction indicator not working |1.5.1c|6
Front suspension has excessive stiffness in the suspension movement. |2.3.6b|6
Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|6
Direction indicator missing |1.5.1a|6
An item not tested |Manual|6
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h|6
Rear reflector missing |4.8.2 |a| |ii||6
Rear Roller brake test indicates a sticking brake |3.3.A1a|6
Offside Front Direction indicators not working |1.5.1c|6
Horn not working (7.7 (a) (ii))6
Headlamp main beam affected by the operation of another lamp |1.2.2c|5
Rear shock absorber seal failed and leaking oil |2.4.A.1c|5
Centre Rear Rear reflector on motorcycle missing |1.4.1|5
Brake locking device missing |3.2.A1e|5
Front Direction indicator not working |1.5.1c|5
Nearside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|5
Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a|5
Rear Direction indicators not working |1.5.1c|5
Exhaust markings indicating not for road use or similar wording |7.1.4|5
Nearside Rear Direction indicators not working |1.5.1c|5
Rear Floor brake test indicates a binding brake |3.3.C2c|5
Steering control fouling between components which interferes with the free movement of the steering |2.1.2a|5
Headlamp switch faulty |1.2.4|5
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a|5
Nearside Rear Direction indicator missing |1.5.1a|5
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h|5
Front Roller brake test indicates a sticking brake |3.3.A1a|5
Front wheel spindle securing nut locking device missing |2.3.3a|5
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k|5
Nearside Rear Footrest missing |6.2.1a|5
Front Footrest insecure |6.2.1a|5
Rear Rear suspension bush has excessive free play |2.4.A2a|i||5
Steering control handlebar movement restricted by trapped cables |2.1.2c|5
Rear Stop lamp remains on when the brake is released |1.3.1e|5
Exhaust excessively deteriorated |7.1.1a|5
Rear Stop lamp not working (4.3.1 (a) (ii))5
Front Wheel bearing rough when rotated (5.1.3 (b) (i))5

We get to these numbers by trawling through over 1 billion MOT test results since 2004 and crunched the numbers. We remove anything to do with Tyres, as they are model independent and group together common non-model specific issues. We are trying to get to a picture of what models have what issues.

Please note: We take the data from the DVSA. This data is raw and can contain typos and spelling mistakes that garages may have entered while recording a MOT result. Specifically miss-match on names of models and makes. We are constantly cleaning the data so bear with the odd issue.

Got suggestions? We’re improving this section all the time. If you have any suggestions, please let us know.

Find us on Facebook

© KnowYourCar™ 2019. All rights reserved
Except where otherwise noted, content on our MOT statistics pages are licensed under a Creative Commons Attribution 4.0 International license.
You are free to redistribute the material in any medium or format as long as credit is given to KnowYourCar

WARNING: We have placed hidden watermarks in our data. We will take action against our data being used outside of these terms.

MOT Data licensed under the Open Government Licence v3.0

By using our site you are agreeing to our terms and conditions
Terms & Conditions  Privacy Policy