Most common failures | No# failures |
---|
Headlamp aim out of alignment | 57 |
Rear reflector on motorcycle missing |1.4.1| | 39 |
Registration plate issues | 28 |
Horn not working |1.7.3a| | 22 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 13 |
Horn not loud enough to be heard by another road user |1.7.3a| | 12 |
Headlamp aim beam image kick up to the offside |1.6| | 9 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 9 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 9 |
Rear Rear reflector on motorcycle missing |1.4.1| | 9 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 8 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 8 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 8 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
Rear suspension bush has excessive free play |2.4.A2a|i|| | 7 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 7 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 7 |
Rear Drive chain sprocket worn to excess |6.2.1e| | 6 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 6 |
Throttle operating incorrectly |6.2.1f| | 6 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 6 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 6 |
Direction indicators not working |1.5.1c| | 6 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 5 |
Drive chain excessively loose |6.2.1d| | 5 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
Fuel system component leaking |7.2.1a| | 5 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 5 |
Steering headbearing has excessive free play |2.2.2| | 4 |
Front wheel bearings have excessive free play |2.3.5b| | 4 |
Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
Drive chain worn to excess |6.2.1e| | 4 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 4 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
Front Front wheel spindle securing nut locking device missing |2.3.3a| | 4 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 4 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 4 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Rear Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
Front wheel bearings are excessively rough |2.3.5b| | 3 |
Offside Front Direction indicator not working |1.5.1c| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
Riders seat insecure |6.2.1a| | 3 |
Drive chain excessively tight |6.2.1d| | 3 |
Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Stop lamp affected by the operation of another lamp |1.3.2| | 3 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 3 |
Centre Rear Rear reflector on motorcycle missing |1.4.1| | 3 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 3 |
Offside Rear Direction indicator not working |1.5.1c| | 3 |
Rear Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 3 |
Horn missing |1.7.1| | 3 |
Front Wheel spoke excessively loose |4.2.1b| | 3 |
Nearside Front Direction indicator not working |1.5.1c| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Wheel spoke excessively loose |4.2.1b| | 2 |
Fuel cap mounting flange/sealing method defective |7.2.2c| | 2 |
Front Wheel has an excessively distorted bead rim. |4.2.2| | 2 |
Brake locking device missing |3.2.A1e| | 2 |
Front Hydraulic brake control feels spongy |3.1.4a| | 2 |
Rear Brake locking device missing |3.2.A1e| | 2 |
Rear Brake lining|s| less than 1.5 mm thick |3.2.A1f|i|| | 2 |
Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Rear Drive chain excessively loose |6.2.1d| | 2 |
Front Direction indicator not working |1.5.1c| | 2 |
Rear Direction indicator not working |1.5.1c| | 2 |
Centre Front Horn not working |1.7.3a| | 2 |
Registration plate lamp issues | 2 |
Nearside Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 2 |
Rear position lamp insecure |1.1.1c| | 2 |
Chain guard insecure |6.2.1c| | 2 |
All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Rear suspension bearing has excessive free play |2.4.A2a|i|| | 2 |
Front Headlamp aim beam image kick-up is to the offside |1.6.1| | 2 |
Brake lever has inadequate reserve travel |3.1.3b| | 2 |
Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 2 |
Front wheel spindle securing nut locking device missing |2.3.5a| | 2 |
Front Hydraulic brake control creeps under load. |3.1.4a| | 2 |
Rear parking brake recording little or no effort | 2 |
Front Direction indicator affected by the operation of another lamp |1.5.1c| | 2 |
All position lamps not working |1.1.A.3b| | 2 |
Front position lamp missing |1.1.1a| | 2 |
Nearside Front Direction indicators not working |1.5.1c| | 2 |
Headlamp insecure |1.2.3b| | 2 |
Front Horn not loud enough to be heard by another road user |1.7.3a| | 2 |
Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
Roller brake test Neither brake control achieves an efficiency of 25% |3.3.A2b| | 2 |
Rear Front wheel spindle securing nut locking device insecure |2.3.3a| | 2 |
Rear Wheel bearing has excessive play (5.1.3 (a) (i)) | 2 |
Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 2 |
Front Service brake excessively binding (1.2.1 (f)) | 2 |
Rear Position lamp not working (4.2.1 (a)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 2 |
Rear Wheel spindle locking device missing (5.2.1 (d)) | 2 |