| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 44 |
| Registration plate issues | 31 |
| Rear reflector on motorcycle missing |1.4.1| | 18 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 11 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 11 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 11 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 9 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Horn not working |1.7.3a| | 7 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 6 |
| Steering headbearing has excessive free play |2.2.2| | 6 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 5 |
| Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 5 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 5 |
| Front wheel spindle securing nut locking device missing |2.3.3a| | 5 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 4 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
| Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 4 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 4 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 4 |
| Front Direction indicator not working |1.5.1c| | 4 |
| Rear Direction indicator not working |1.5.1c| | 4 |
| Riders seat insecure |6.2.1a| | 4 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 4 |
| Front Direction indicator flashing less than 60 times a minute |1.5.1c| | 3 |
| Rear Direction indicator flashing less than 60 times a minute |1.5.1c| | 3 |
| Drive chain excessively loose |6.2.1d| | 3 |
| Drive chain worn to excess |6.2.1e| | 3 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Front Front wheel spindle securing nut locking device missing |2.3.3a| | 3 |
| Rear Wheel alignment incorrect which adversely affects the handling |2.5.1| | 3 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
| Front wheel spindle securing nut locking device missing |2.3.5a| | 3 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 3 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 3 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 3 |
| Front Horn not working |1.7.3a| | 3 |
| Service brake: efficiency below requirements |3.7.B.7| | 3 |
| Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 3 |
| Direction indicators not working |1.5.1c| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 3 |
| Horn missing |1.7.1| | 3 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 2 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
| Brake locking device missing |3.2.A1e| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Nearside Rear Direction indicators not working |1.5.1c| | 2 |
| Rear Gradient brake test indicates a binding brake |3.3.D1c| | 2 |
| Front mudguard insecure |2.3.7| | 2 |
| Rear Drive chain excessively loose |6.2.1d| | 2 |
| Rear Brake pedal has inadequate reserve travel |3.1.3b| | 2 |
| Rear Hydraulic brake control feels spongy |3.1.4a| | 2 |
| Front Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 2 |
| Nearside Rear reflector missing |1.5.1a| | 2 |
| Brake cable has wires broken and is significantly weakened |3.5.1b| | 2 |
| Rear parking brake recording little or no effort | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Offside Rear Brake pipe inadequately clipped |3.6.B.1| | 2 |
| Front Steering headbearing has excessive free play |2.2.2| | 2 |
| Roller brake test No brake control achieves an efficiency of 30%. |3.3.A2a| | 2 |
| Brake lever insecure |3.1.2a| | 2 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Fuel system component leaking |7.2.1a| | 2 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 2 |
| Rear Front wheel spindle securing nut locking device missing |2.3.3a| | 2 |
| Front Direction indicators not working |1.5.1c| | 2 |
| Drive chain excessively tight |6.2.1d| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Fuel tank leaking |7.2.1a| | 2 |
| Rear suspension component loose |2.4.A.1a| | 2 |
| Nearside rear brake recording little or no effort |3.7.B.5a| | 2 |
| Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Nearside Outer Rear Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Offside Outer Rear Lower Suspension arm ball joint dust cover excessively damaged so that it no longer prevents the ingress of dirt |2.4.G.2| | 1 |
| Parking brake is not capable of being maintained in operation by direct mechanical action only |3.1.2| | 1 |
| Front front brake binding |3.7.B.1| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Front Brake pedal fouling on other parts of the vehicle |3.3.A.4| | 1 |
| Front wheel insecure |4.2.3b| | 1 |
| Nearside Front Upper Direction indicators not working |1.5.1c| | 1 |
| Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Rear Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Rear Wheel fixing missing |single fixing| rear wheel axle lockind device missing |5.2.1 |a| |ii|| | 1 |
| Rear Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Rear Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Front Brake disc|s| insecure |3.2.A1g| | 1 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 1 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
| Front Brake component defective due to a deliberate modification which significantly reduces the original strength |3.1.5| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Front wheel spindle securing nut locking device missing |2.3.5a| | 1 |
| Brake rod excessively chafed |3.2.A1a| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Front Front position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Rear Front position lamp|s| not working |1.1.A.3b| | 1 |
| Brake lever attachment screws loose |9.3.1b| | 1 |
| Offside Brake lever inappropriately repaired |9.3.1j| | 1 |
| Centre Rear Upper Stop lamp missing |1.3.3a| | 1 |
| Rear Stop lamp missing |1.3.3a| | 1 |
| Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Rear Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Stop lamp not working both |1.2.1b| | 1 |
| Rear Brake performance not tested |3.7.A.1| | 1 |
| front brake binding |3.7.B.1| | 1 |
| Offside Rear Wheel bolt|s| missing |4.2.A.1e| | 1 |
| Rear Hydraulic brake cylinder inappropriately repaired |3.6.A.3| | 1 |
| Rear Brake pedal functionally incomplete |3.3.A.1a| | 1 |
| Nearside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Offside Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
| Nearside Front Footrest insecure |6.2.1a| | 1 |
| Nearside Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
| Front Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
| All position lamps not working |1.1.A.3b| | 1 |
| Centre Headlamp not working on dipped beam |1.7.5a| | 1 |
| Centre Headlamp not working on main beam |1.7.5a| | 1 |
| Front brake disc contaminated by brake fluid |3.5.1h| | 1 |
| Front Braking system leaking |3.6.A.1| | 1 |
| Front Hand operated control valve control cannot be moved over its full travel |3.2.1c| | 1 |
| Nearside Direction indicator not working |1.5.1c| | 1 |
| Outer Rear Lower Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Indicator tell tale not functioning |1.5.2| | 1 |
| Rear suspension movement is excessively stiff |2.4.A.3b| | 1 |
| Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Front Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
| Offside Front Direction indicator not working |1.5.1c| | 1 |
| Footrest insecure fitted in the wrong direction |6.2.1a| | 1 |
| Direction indicator incorrect colour white lights |1.5.1b| | 1 |
| Stop lamp damaged and function impaired |1.3.3a| | 1 |
| Offside Front Brake disc|s| excessively pitted |3.2.A1l| | 1 |
| Rear Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.3a| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Rear Mechanical brake component locking device missing |3.5.1l| | 1 |
| Mechanical brake component has restricted free movement | 1 |
| Driver`s seat insecure |6.2.A.1| | 1 |
| Vehicle Identification Number not permanently displayed |6.3.5.a| | 1 |
| Nearside Rear Rear position lamp|s| missing |1.1.A.3a| | 1 |
| Offside Rear Rear position lamp|s| missing |1.1.A.3a| | 1 |
| Offside Rear reflector missing |1.5.1a| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
| Nearside Front Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Offside Front Shock absorber has an excessively worn bush |2.7.4| | 1 |
| Nearside Rear Brake pipe inadequately supported |3.6.B.1| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Brakes imbalanced across an axle | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Rear Rear wheel spindle securing nut locking device insecure |2.4.A.2b| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Centre Exhaust mounting missing |7.1.1c| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Front Brake lever insecure |3.1.2a| | 1 |
| Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Chain guard insecure |6.2.1c| | 1 |
| Exhaust has part of the system missing |7.1.1a| | 1 |
| Direction indicators not working all |1.5.1c| | 1 |
| Brake pipe union leaking fluid |3.2.B4| | 1 |
| Offside Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Nearside Rear Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Nearside Handlebar mounting clamp bolt loose |9.2.1c| | 1 |
| Footrest insecure |9.6.1| | 1 |
| Brake lever has inadequate reserve travel |9.3.1f| | 1 |
| Axle king pin retaining device missing |2.5.A.3a| | 1 |
| Centre front brake recording little or no effort |3.7.B.5a| | 1 |
| Offside Rear front brake recording little or no effort |3.7.B.5a| | 1 |
| Rear shock absorber insecurely mounted |2.4.A.3b| | 1 |
| Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
| Front Headlamp incorrect colour |1.2.1| | 1 |
| Wheel spoke excessively loose |4.2.1b| | 1 |
| Nearside Rear Lower Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Offside Rear Lower Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| All position lamps not working |4.2.1 |a|| | 1 |
| Front Brake disc contaminated greasy |1.1.14 |b|| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
| Offside Front Steering lock stop ineffective |2.1.3| | 1 |
| Nearside Drive chain worn to excess |6.2.1e| | 1 |
| Nearside Rear Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Nearside Front Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Offside Rear Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Front Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Front Front wheel spindle securing nut locking device insecure |2.3.5a| | 1 |
| Rear Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Front Hydraulic brake control creeps under load. |3.1.4a| | 1 |
| Front Brake lever has inadequate reserve travel brake |3.1.3b| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
| Offside Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
| Front Rear wheel insecure |4.2.3b| | 1 |
| An item not tested |Manual| | 1 |
| Nearside Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Wheel spoke excessively loose |4.2.1b| | 1 |
| Front Headlamp aim does not move downwards when dipped |1.6.5| | 1 |
| Front position lamp flickers when tapped lightly by hand |1.1.3c| | 1 |
| Offside Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Front Headlamp switch faulty |1.2.4| | 1 |
| Rear Rear spring worn and seriously weakened |2.4A1b|ii|| | 1 |
| Rear Rear suspension bush has excessive free play |2.4.A2a|i|| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Drive chain fouling another component |6.2.1d| | 1 |
| All direction indicators missing |4.4.1 |a| |ii|| | 1 |
| Front Headlamp insecure |1.2.3b| | 1 |
| Footrest missing |6.2.1a| | 1 |
| Offside Front Brake cylinder insecurely mounted |3.2.B1a| | 1 |
| Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Front wheel bearings are excessively rough |2.3.5b| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Offside Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Front Steering lock stop ineffective |2.1.3| | 1 |
| Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Front Brake pipe inadequately supported |3.2.B2b| | 1 |
| Nearside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Offside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front Brake cable badly frayed |3.2.A1b| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Drive chain sprocket worn to excess |6.2.1e| | 1 |
| Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Stop lamp not working |1.2.1b| | 1 |
| Nearside Rear Brake hose leaking |3.6.A.1| | 1 |
| Nearside Rear Brake pipe inadequately clipped |3.6.B.1| | 1 |
| Fuel system component leaking |7.2.3| | 1 |
| Hazard warning lamps not fitted |1.4.B.1a| | 1 |
| Offside Obligatory mirror missing |8.1.1| | 1 |
| Nearside Obligatory mirror missing |8.1.1| | 1 |
| Direction indicators flashing less than 60 times a minute |1.4.A.2g| | 1 |
| Offside rear brake recording little or no effort |3.7.B.5a| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Nearside Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear suspension component loose swing arm spindle |2.4.A.1a| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Rear Brake back plate|s| securing bolt|s| missing |3.2.A1j| | 1 |
| Offside Fuel system component leaking Carburettor |7.2.1a| | 1 |
| Centre Rear reflector on motorcycle missing |1.4.1| | 1 |
| Wheel more than one fixing loose front wheel spindle clamp |5.2.1 |a| |ii|| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Brake hose fouling routed wrong |3.2.B3b| | 1 |
| Throttle operating incorrectly Not returning |6.2.1f| | 1 |
| Direction indicators not working Not fitted but still has idiot light |1.5.1c| | 1 |
| Headlamp missing Mian and dip beam wrong way on switch |1.2.3a| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Front wheel spindle loose Front |2.3.3a| | 1 |
| Fuel cap sealing washer deteriorated |7.2.2c| | 1 |
| Rear Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Nearside Front Roller brake test indicates a binding brake caliper catching disc |3.3.A1a| | 1 |
| Wheel alignment incorrect which adversely affects the steering |2.5.1| | 1 |
| Direction indicators affected by the operation of another lamp Nearside and offside |1.5.1c| | 1 |
| Front Gradient brake test indicates a binding brake |3.3.D1c| | 1 |
| Direction indicators affected by the operation of another lamp |1.5.1c| | 1 |
| Front Gradient brake test indicates a sticking brake |3.3.D1c| | 1 |
| Rear Gradient brake test indicates a sticking brake |3.3.D1c| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Centre Front Front position lamp insecure |1.1.1c| | 1 |
| Centre Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Centre Rear Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Headlamp aim not tested (4.1.2 (b)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Offside Rear Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
| Rear Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
| Front Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Front Headlamp aim not tested (4.1.2 (b)) | 1 |
| Rear Position lamp not working (4.2.1 (a)) | 1 |
| Drive chain worn to excess (6.1.7 (c) (i)) | 1 |
| Rear Drive chain sprocket worn to excess (6.1.7 (c) (i)) | 1 |
| Drive chain so worn it is likely to fail (6.1.7 (c) (ii)) | 1 |