| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 42 |
| Registration plate issues | 38 |
| Rear reflector on motorcycle missing |1.4.1| | 11 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 7 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 6 |
| Rear reflector missing (4.8.2 (a) (ii)) | 6 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 5 |
| Horn not working |1.7.3a| | 5 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 5 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
| Front Brake disc|s| cracked |3.2.A1g| | 4 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 4 |
| Front position lamp incorrect colour |1.1.2a| | 4 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Rear reflector missing |4.8.2 |a| |ii|| | 3 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 3 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 3 |
| Stop lamp remains on when the brakes are released | 3 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 3 |
| Rear Position lamp not working (4.2.1 (a)) | 3 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 2 |
| Fuel system component leaking |7.2.1a| | 2 |
| Rear Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Rear mono-shock insecure |2.4.B.4| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 2 |
| Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 2 |
| Rear Wheel spoke excessively loose |4.2.1b| | 2 |
| Rear reflector on motorcycle obscured |1.4.1| | 2 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Stop lamp remains on when the brake is released |1.3.1e| | 2 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 2 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Rear Brake excessively binding (1.2.1 (f)) | 2 |
| Registration plate lamp issues | 2 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 2 |
| Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Stop lamp not working Front switch |4.3.1 |a| |ii|| | 1 |
| Roller brake test indicates a binding brake front and rear brakes binding |3.3.A1a| | 1 |
| Brake pedal is bent and the brake cannot be readily applied |3.1.3c| | 1 |
| Horn control defective |1.7.2a| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Nearside Front Direction indicators not working |1.5.1c| | 1 |
| Fuel cap does not fasten securely by a positive means |7.2.2b| | 1 |
| Throttle operating incorrectly Cables seized. |6.2.1f| | 1 |
| Offside Rear Footrest insecure Bolts missing. |6.2.1a| | 1 |
| Pillion seat insecure |6.2.6 |a| |ii|| | 1 |
| Rear Brake pedal has insufficient reserve travel |1.1.2 |a|| | 1 |
| Nearside Front All direction indicators not working |4.4.1 |a| |ii|| | 1 |
| Nearside Footrest insecure |6.2.1a| | 1 |
| Rear Lower Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Rear Brake locking device missing |3.2.A1e| | 1 |
| Front An item not tested |Manual| | 1 |
| Rear An item not tested |Manual| | 1 |
| Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Handlebar deformed |2.1.1b| | 1 |
| Headlamp aim not tested |1.6| | 1 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
| Offside Rear Direction indicator incorrect colour |1.5.1b| | 1 |
| Rear shock absorber insecurely mounted Rear mount snapped |2.4.A.3b| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
| Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.C1b| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Front suspension assembly component excessively misaligned |2.3.1| | 1 |
| Nearside Front suspension assembly has an insecure fork brace |2.3.4d| | 1 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
| Throttle operating incorrectly |6.2.1f| | 1 |
| An item not tested |Manual| | 1 |
| Direction indicators flashing more than 120 times per minute all |1.5.1c| | 1 |
| Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
| Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
| Centre Rear Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Centre Headlamp not working on dipped beam |1.7.5a| | 1 |
| Centre Headlamp not working on main beam |1.7.5a| | 1 |
| Rear Direction indicator adversely affected by the operation of another lamp |1.4.A.2h| | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure rear brake torque arm retaining nut and bolt loose |6.1.1 |b| |i|| | 1 |
| Rear Seat insecure |6.2.1a| | 1 |
| Nearside Rear Wheel spoke excessively loose |5.2.2 |d|| | 1 |
| All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition baffles fitted |8.1.1 |a|| | 1 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
| Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Rear position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
| Offside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Nearside Rear Direction indicators not working |1.5.1c| | 1 |
| Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
| Fuel cap does not fasten securely maintaining the sealing arrangement |7.2.2b| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Rear Stop lamp not working |1.2.1b| | 1 |
| Rear Tie bar/rod attachment bracket/mounting insecure |2.4.G.1| | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected pedal ceasing locking brake on when applied |1.1.2 |b| |ii|| | 1 |
| Front Exhaust has a major leak of exhaust gases exhaust blowing excessively causing flames to be emitted from front cylinder |6.1.2 |a|| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Nearside Front Footrest insecure |6.2.12 |a|| | 1 |
| Front Fuel cap mounting flange/sealing method defective |7.2.2c| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Handlebar mounting excessively deteriorated |flexible type| |2.1.1d| | 1 |
| Nearside Rear Footrest missing |6.2.1a| | 1 |
| Rear Footrest missing |6.2.1a| | 1 |
| Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Offside Front Upper Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Stop lamp does not illuminate immediately a brake applies front brake switch in-op |1.3.1a| | 1 |
| Front Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Centre Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Direction indicator not working side light within indicator does not go out when indicator is operated. |1.5.1c| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Rear position lamp damaged and function impaired |1.1.1b| | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen no pattern (4.1.2 (a)) | 1 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Hazard warning lamps inoperative All Lamps (4.4.1 (e)) | 1 |
| Hazard warning switch inoperative (4.4.2 (a) (ii)) | 1 |
| Brake hose excessively twisted Pipe from master cylinder to 3 way union (1.1.12 (b) (ii)) | 1 |
| Front Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Brake disc contaminated (1.1.14 (b)) | 1 |
| Rear Position lamp not working rear position lamp not working - PRS - replace bulb (4.2.1 (a)) | 1 |
| Nearside Rear Direction indicator light intensity significantly reduced (4.4.3 (a)) | 1 |
| Offside Rear Direction indicator light intensity significantly reduced (4.4.3 (a)) | 1 |
| Stop lamp adversely affected by the operation of another lamp (4.3.3 (b)) | 1 |
| Offside Front Direction indicator obviously incorrectly positioned (4.4.3 (a)) | 1 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
| Headlamp insecure (4.1.1 (c)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Steering linkage locking device ineffective Rear torque arm (2.1.3 (d)) | 1 |
| Front All position lamps not working (4.2.1 (a)) | 1 |
| Nearside Front Direction indicator adversely affected by the operation of another lamp water inside lense dried out (4.4.3 (b)) | 1 |
| Offside Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
| Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear reflector likely to become detached (4.8.1 (b) (ii)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Central Rear Stop lamp does not illuminate by the operation of both brake controls Front brake switch not working (4.3.2 (a) (iii)) | 1 |
| Rear Shock absorber insecurely attached (5.3.2 (a) (i)) | 1 |
| Rear Brake performance not tested (1.2.1 (g)) | 1 |
| Offside Front Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Rear Shock absorber insecurely attached rear shock absorber has broken away from swinging arm. (5.3.2 (a) (i)) | 1 |
| Rear Position lamp adversely affected by the operation of another lamp Flashing with indicators (4.2.3 (b)) | 1 |
| Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
| Horn not working (7.7 (a)) | 1 |
| Rear Position lamp adversely affected by the operation of another lamp (4.2.3 (b)) | 1 |
| Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |
| Rear Motorcycle structure joining/attachment plate or fastening so insecure that structural rigidity is seriously reduced Sub frame attachment loose. (6.1.1 (b) (ii)) | 1 |
| Rear Pillion seat with a defective supporting structure Sub frame attachment loose. (6.2.6 (a) (i)) | 1 |
| Nearside Rear Lower Brake excessively binding Rear Brake Cam Sticking On , Excessive Bind (1.2.1 (f)) | 1 |