Most common failures | No# failures |
---|
Headlamp aim out of alignment | 63 |
Registration plate issues | 35 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 12 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 12 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 11 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 9 |
Front Brake disc|s| cracked |3.2.A1g| | 7 |
Rear Wheel spoke excessively loose |4.2.1b| | 5 |
Front Brake excessively binding (1.2.1 (f)) | 5 |
Throttle operating incorrectly |6.2.1f| | 4 |
Rear reflector on motorcycle missing |1.4.1| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Nearside Rear Direction indicator not working |1.5.1c| | 3 |
Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
Headlamp insecure |1.2.3b| | 3 |
Registration plate lamp issues | 3 |
Rear mono-shock insecure |2.4.B.4| | 3 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Horn not loud enough to be heard by another road user |1.7.3a| | 3 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Roller brake test The less effective brake control does not achieve an efficiency of 25%. |3.3.A2b| | 3 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 3 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 2 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 2 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Rear shock absorber insecurely mounted |2.4.A.3b| | 2 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 2 |
Rear Wheel spoke cracked. |4.2.1b| | 2 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 2 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 2 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
Headlamp aim beam image kick up to the offside |1.6| | 2 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 2 |
Front position lamp missing |1.1.1a| | 2 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Nearside Rear Footrest missing |6.2.1a| | 2 |
Offside Rear Footrest missing |6.2.1a| | 2 |
Direction indicator not working |1.5.1c| | 2 |
Roller brake test The less effective brake control does not achieve an efficiency of 25% (1.2.2 (a) (i)) | 2 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 2 |
Front Brake effort inadequate at a wheel (1.2.1 (a) (i)) | 2 |
Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 2 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 2 |
Brake performance not tested (1.2.1 (g)) | 2 |
Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 2 |
Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Horn not working (7.7 (a) (ii)) | 2 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Stop lamp remains on when the brakes are released | 2 |
Rear suspension has a fracture of a load bearing member or its supporting structure. |2.4.A.2d| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Front Brake disc fractured |1.1.14 |a| |ii|| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Steering control handlebar movement restricted by cables caught on a projection |2.1.2c| | 1 |
Rear position lamp damaged and function impaired |1.1.1b| | 1 |
Rear position lamp incorrect colour |1.1.2b| | 1 |
Rear Motorcycle structure insecure and likely to affect the correct functioning of the steering or braking |6.1.1c| | 1 |
Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
Offside Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Nearside Rear Direction indicators not working |1.5.1c| | 1 |
Front position lamp insecure |1.1.1c| | 1 |
Wheel alignment incorrect which adversely affects the handling |2.5.1| | 1 |
Front Stop lamp remains on when the brake is released lever brake |1.3.1e| | 1 |
Front Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Rear Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Nearside Front Front mudguard insecure bolt missing on mudguard stay |bridge support for front forks| |2.3.7| | 1 |
Front Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Rear Direction indicator obviously incorrectly positioned |4.4.3 |a|| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Handlebar fouling on the fuel tank or bodywork on full lock |2.1.4 |b|| | 1 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
Clutch lever shortened so it cannot be readily operated. |6.2.1g| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Front Brake lever insecure |3.1.2a| | 1 |
Headlamp aim headlamp deteriorated and function impaired |1.2.3a| | 1 |
Front Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 1 |
Front Wheel bearing play so excessive it is likely to break up |5.1.3 |a| |ii|| | 1 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
Parking brake lever has no reserve travel |3.1.6b| | 1 |
Headlamp incorrect colour |1.2.1| | 1 |
Direction indicator incorrect colour all |1.5.1b| | 1 |
Rear reflector on motorcycle obscured |1.4.1| | 1 |
Rear Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Rear Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
Rear Brake reaction bracket securing bolt|s| loose |3.2.A1j| | 1 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Offside Front shock absorber leaking oil |9.2.7b| | 1 |
Nearside Front shock absorber leaking oil |9.2.7b| | 1 |
Offside Front brake disc contaminated by oil |3.5.1h| | 1 |
Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
Fuel system component leaking |7.2.1a| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Rear reflector on motorcycle incorrectly positioned |1.4.2d| | 1 |
Front suspension fouling which affects the movement of the front suspension. |2.3.6a| | 1 |
Nearside Front Lower Engine mounting/bracket missing Bolt missing |6.1.8 |a| |ii|| | 1 |
Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies light not illuminating when pedal depressed |1.3.1a| | 1 |
Front Front position lamp insecure |1.1.1c| | 1 |
Rear position lamp deteriorated and function impaired |1.1.1b| | 1 |
Headlamp switch faulty |1.2.4| | 1 |
Nearside Front Brake caliper|s| securing bolt|s| missing |3.2.A1j| | 1 |
Rear Brake linkage has abnormal movement due to maladjustment |3.2.A1i| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Front suspension assembly excessive wear or free play in a front suspension component |2.3.4| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Nearside Rear All direction indicators not working |4.4.1 |a| |ii|| | 1 |
Front Headlamp aim beam image too far to the right |1.6.4| | 1 |
Direction indicator flashing more than 120 times per minute All |1.5.1c| | 1 |
Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
Nearside Rear Rear position lamp incorrect colour |1.1.2b| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Wheel spoke excessively loose all |5.2.2 |d|| | 1 |
Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Nearside Steering lock stop ineffective hitting fuel tank |2.1.3| | 1 |
Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Front Upper Brake pipe union leaking fluid |3.2.B4| | 1 |
Front Brake fluid reservoir fluid not visible fluid cap leaking |1.1.10 |d| |iii|| | 1 |
Front Brake disc contaminated |1.1.14 |b|| | 1 |
Rear Brake linkage has restricted free movement lever and linkage sticking causing bind of rear brake |1.1.15 |e|| | 1 |
Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Rear position lamp obscured more than 50% |1.1.1d| | 1 |
Rear mono-shock pivot excessively worn |2.4.B.4| | 1 |
Rear Rear spring fractured |2.4.A1b|i|| | 1 |
Brake hose damaged | 1 |
Nearside Front Direction indicator insecure |1.5.3b| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Front Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Horn missing |1.7.1| | 1 |
Front position lamp adversely affected by the operation of another lamp |1.1.3b| | 1 |
Nearside Direction indicators not working |1.5.1c| | 1 |
Offside Direction indicators not working |1.5.1c| | 1 |
Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
Locking device|s| not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
Horn not working |1.7.3a| | 1 |
Stop lamp does not emit a steady light |1.3.1b| | 1 |
Exhaust system insecure mounting bracket broken |6.1.2 |a|| | 1 |
Wheel spoke excessively loose rear wheel,all spokes are loose,allowing wheel to wobble |4.2.1b| | 1 |
Wheel spoke cracked. rear wheel,at least 1 broken spoke,may be more |4.2.1b| | 1 |
Wheel has an excessively distorted bead rim. wheel wobbles due to spokes,suspect rim to be ok. |4.2.2| | 1 |
Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
Front Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Rear Exhaust mounting missing |7.1.1c| | 1 |
Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 1 |
Rear Wheel spoke missing |4.2.1b| | 1 |
Front Brake locking device missing |3.2.A1e| | 1 |
Front Brake component has restricted free movement and operation is likely to be impeded |3.2.A1h| | 1 |
Exhaust mounting missing |7.1.1c| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Front Direction indicators not working |1.5.1c| | 1 |
Centre Front Indicator tell tale not functioning |1.5.2| | 1 |
Centre Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
Offside Front wheel spindle securing nut locking device missing |2.3.3a| | 1 |
Front suspension has excessive stiffness in the suspension movement. |2.3.6b| | 1 |
Hazard warning switch inoperative |4.4.2 |a| |ii|| | 1 |
Nearside Obligatory mirror missing |3.3 |a|| | 1 |
Rear Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
Headlamp not working on main beam (4.1.1 (a) (ii)) | 1 |
Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
Front Headlamp light source and lamp not compatible (4.1.4 (c)) | 1 |
Headlamp light source and lamp not compatible NO BEAM PATTERN (4.1.4 (c)) | 1 |
Handlebar fouling on the fuel tank or bodywork on full lock (2.1.4 (b)) | 1 |
Nearside Front Direction indicator not working (1.5.1c) | 1 |
Rear Brake excessively binding (1.2.1 (f)) | 1 |
Front Brake fluid contaminated (1.8 (a)) | 1 |
Nearside Rear Direction indicator incorrect colour (4.4.3 (a)) | 1 |
Nearside Rear Direction indicator missing (4.4.1 (a) (ii)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Rear All direction indicators obviously incorrectly positioned (4.4.3 (a)) | 1 |
Front Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Central Front Lower Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Front Brake disc fractured (1.1.14 (a) (ii)) | 1 |
Rear Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Stop lamp not working front brake (4.3.1 (a) (ii)) | 1 |
Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Rear Wheel spoke excessively loose (5.2.2 (d)) | 1 |
Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
Stop lamp not working control 2 (4.3.1 (a) (ii)) | 1 |
Fuel cap ineffective (6.1.3 (b) (i)) | 1 |
Rear Suspension component mounting modified so the suspension is inoperative (5.3.3 (c) (ii)) | 1 |
Nearside Front Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Offside Front Direction indicator adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
Service brake efficiency less than 50% of the required value (1.2.2 (a) (ii)) | 1 |
Hazard warning lamps not fitted (4.4.1 (d)) | 1 |
Nearside Rear Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Offside Rear Service brake efficiency below requirements (1.2.2 (a) (i)) | 1 |
Brake pedal has insufficient reserve travel (1.1.2 (a)) | 1 |