| Most common failures | No# failures |
|---|
| Registration plate issues | 47 |
| Headlamp aim out of alignment | 40 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 14 |
| Rear reflector on motorcycle missing |1.4.1| | 13 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Horn not working |1.7.3a| | 9 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 7 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 6 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 5 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 5 |
| Rear reflector missing (4.8.2 (a) (ii)) | 5 |
| Stop lamp remains on when the brakes are released | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 3 |
| Nearside Rear Direction indicators not working |1.5.1c| | 3 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 3 |
| Headlamp aim beam image kick up to the offside |1.6| | 3 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
| Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 3 |
| Nearside Rear Direction indicator not working (4.4.1 (a) (ii)) | 3 |
| Offside Rear Direction indicator not working |1.5.1c| | 2 |
| Stop lamp not working |4.3.1 |a| |ii|| | 2 |
| Front Brake indicates excessive fluctuation of brake effort |1.2.1 |e|| | 2 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 2 |
| Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear position lamp insecure |1.1.1c| | 2 |
| Brake lever has inadequate reserve travel |3.1.3b| | 2 |
| Front wheel bearings have excessive free play |2.3.5b| | 2 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Direction indicators not working |1.5.1c| | 2 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Throttle operating incorrectly |6.2.1f| | 2 |
| Handlebar handgrip not secure to handlebars. |2.1.1c| | 2 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 2 |
| Front mudguard insecure |2.3.7| | 2 |
| Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 2 |
| Front Position lamp not working (4.2.1 (a)) | 2 |
| Rear Stop lamp not working (4.3.1 (a) (ii)) | 2 |
| Rear Position lamp not working (4.2.1 (a)) | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Registration plate lamp issues | 2 |
| Rear Rear reflector missing (4.8.2 (a) (ii)) | 2 |
| Rear Brake excessively binding (1.2.1 (f)) | 2 |
| Front Brake caliper leaking and braking performance affected |1.1.16 |b| |ii|| | 1 |
| Clutch lever positioned so it cannot be readily operated. |6.2.1g| | 1 |
| Offside Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Horn not working |7.7 |a| |ii|| | 1 |
| All direction indicators missing |4.4.1 |a| |ii|| | 1 |
| Headlamp aim not tested |4.1.2 |b|| | 1 |
| Headlamp not working on dipped beam |4.1.1 |a| |ii|| | 1 |
| Rear reflector missing |4.8.2 |a| |ii|| | 1 |
| Nearside Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Roller brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Offside Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Rear Brake disc|s| cracked |3.2.A1g| | 1 |
| Nearside Front Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
| Front Headlamp aim beam image kick up to the offside |1.6| | 1 |
| Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
| Offside Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Direction indicator flashing more than 120 times per minute sporadic rapid flashes |1.5.1c| | 1 |
| Nearside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Stop lamp affected by the operation of another lamp |1.3.2| | 1 |
| Front Direction indicators not working |1.5.1c| | 1 |
| Centre Front Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Nearside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Offside Handlebar grip insecure to handlebar |2.2.1 |d| |ii|| | 1 |
| Rear Brake disc|s| excessively scored |3.2.A1l| | 1 |
| Front Brake disc|s| has excessive run out |3.2.A1m| | 1 |
| Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
| Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
| Brake cylinder severely corroded |3.2.B1b| | 1 |
| Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Rear Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Brake lever attachment screws loose |3.1.2b| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Rear Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
| Front Decelerometer brake test indicates a binding brake |3.3.E1d| | 1 |
| Horn missing |1.7.1| | 1 |
| An item not tested |Manual| | 1 |
| Rear Position lamp not working |4.2.1 |a|| | 1 |
| Horn not loud enough to be heard by another road user |1.6.2b| | 1 |
| Brake performance not tested |3.3| | 1 |
| Direction indicator missing |1.5.1a| | 1 |
| Rear suspension bearing excessively deteriorated |2.4A.2a|i|| | 1 |
| Rear reflector on motorcycle deteriorated and function impaired |1.4.2a| | 1 |
| Nearside Rear position lamp|s| adversely affected by the operation of another lamp |1.1.A.3f| | 1 |
| Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
| Rear Brake component is severely distorted |3.1.5| | 1 |
| Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Front Hydraulic brake control feels spongy |3.1.4a| | 1 |
| Fuel hose leaking |7.2.1a| | 1 |
| Brake reaction bracket insecure |3.2.A1j| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Front Brake excessively binding |1.2.1 |f|| | 1 |
| Nearside Stop lamp not working |1.2.1b| | 1 |
| Offside Front position lamp|s| not working |1.1.A.3b| | 1 |
| Front Roller brake test indicates a sticking brake |3.3.A1a| | 1 |
| Parking brake: efficiency below requirements |3.7.B.7| | 1 |
| Nearside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Offside Rear wheel bearing has excessive play |2.6.2| | 1 |
| Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Nearside Front Brake hose leaking fluid |3.2.B4| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Brake lever is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Parking brake lever has no reserve travel |3.1.6b| | 1 |
| Brake pedal has insufficient reserve movement |3.3.A.5| | 1 |
| Nearside Front brake disc contaminated by oil |3.5.1h| | 1 |
| Offside Front brake disc contaminated by oil |3.5.1h| | 1 |
| Stop lamp not working off front brake lever |1.2.1b| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar vehicle fitted with a standard silencer in average condition |7.1.4| | 1 |
| Exhaust has a major leak of exhaust gases |7.1.2| | 1 |
| Nearside Front shock absorber leaking oil |9.2.7b| | 1 |
| Offside Front shock absorber leaking oil |9.2.7b| | 1 |
| Nearside Rear position lamp|s| not working |1.1.A.3b| | 1 |
| Offside Front position lamp|s| adversely affected by the operation of another lamp dim |1.1.A.3f| | 1 |
| Service brake: efficiency below requirements |3.7.C.1a| | 1 |
| Parking brake: efficiency below requirements |3.7.C.1b| | 1 |
| All position lamps not working |1.1.A.3b| | 1 |
| Nearside Rear brake caliper securing device loose |3.5.1j| | 1 |
| Offside Rear Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Nearside Front Lower Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Offside Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Offside Rear wheel bearings are excessively rough |2.4.A.2c| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
| Brake pedal has inadequate reserve travel |3.1.3b| | 1 |
| Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Brake fluid reservoir leaking hydraulic fluid |3.2.B1e| | 1 |
| Front Brake fluid reservoir fluid level dangerously low |3.2.B1d| | 1 |
| Rear reflector likely to become detached (4.8.1 (b) (ii)) | 1 |
| Front Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Nearside Front Brake caliper insecure (1.1.16 (c) (i)) | 1 |
| Nearside Steering operation restricted in free movement from lock to lock fouling on trapped cable (2.1.4 (c)) | 1 |
| Headlamp light intensity severely reduced (4.1.4 (a)) | 1 |
| Headlamp aim so that beam "kick up" is not visible on the screen (4.1.2 (a)) | 1 |
| Front Brake grabbing severely (1.2.1 (c)) | 1 |
| Fuel cap leaking (6.1.3 (b) (i)) | 1 |
| Front Suspension attachment bracket/mounting insecure missing (5.3.3 (a) (i)) | 1 |
| Headlamp light source and lamp not compatible Incorrect image (4.1.4 (c)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Offside Rear Stop lamp does not illuminate by the operation of both brake controls (4.3.2 (a) (iii)) | 1 |
| Offside Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear Brake indicates excessive fluctuation of brake effort (1.2.1 (e)) | 1 |
| Rear Brake pedal not releasing correctly and functionality of brakes affected (1.1.2 (b) (ii)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
| Rear Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
| Steering headbearing in such a condition that steering control is adversely affected (2.2.2 (f) (ii)) | 1 |
| Forks insecure (2.2.2 (d) (i)) | 1 |
| Forks in such a condition that steering control is adversely affected (2.2.2 (d) (ii)) | 1 |
| Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Brake lever has insufficient reserve travel (1.1.2 (a)) | 1 |
| Steering headbearing excessively stiff or notchy (2.2.2 (f) (i)) | 1 |
| Offside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Rear All direction indicators adversely affected by the operation of another lamp (4.4.3 (b)) | 1 |
| Throttle operating incorrectly stiff (6.2.7 (a) (i)) | 1 |
| Nearside Front Brake excessively binding (1.2.1 (f)) | 1 |
| Offside Front Brake excessively binding (1.2.1 (f)) | 1 |
| Nearside Front Brake performance not tested (1.2.1 (g)) | 1 |
| Offside Front Brake performance not tested (1.2.1 (g)) | 1 |
| Central Rear Brake performance not tested (1.2.1 (g)) | 1 |
| Front Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
| Rear Stop lamp light intensity significantly reduced (4.3.3 (a) (ii)) | 1 |
| Front Brake lever insecure (1.1.2 (e) (i)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Handlebar mounting insecure (2.2.1 (a) (i)) | 1 |
| Offside Front Position lamp not working (4.2.1 (a) (ii)) | 1 |
| Stop lamp(s) not working on hand brake on handlebars (4.3.1 (a) (ii)) | 1 |
| Position lamp showing white light to the rear (4.2.3 (a) (ii)) | 1 |
| Nearside Service brake excessively binding (1.2.1 (f)) | 1 |
| Front Headlamp not working on dipped beam (4.1.1 (a) (ii)) | 1 |