| Most common failures | No# failures |
|---|
| Headlamp aim out of alignment | 59 |
| Registration plate issues | 33 |
| Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 10 |
| Exhaust is leaking and excessively noisey |7.1.1b| | 9 |
| Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
| Front Roller brake test indicates a binding brake |3.3.A1a| | 7 |
| Front Floor brake test indicates a binding brake |3.3.C2c| | 6 |
| Rear reflector on motorcycle missing |1.4.1| | 6 |
| Offside Front shock absorber seal failed and leaking oil |2.3.3| | 6 |
| Front wheel bearings have excessive free play |2.3.5b| | 5 |
| Throttle operating incorrectly |6.2.1f| | 5 |
| Horn not working |1.7.3a| | 5 |
| Front Front wheel bearings have excessive free play |2.3.5b| | 4 |
| Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 4 |
| Front suspension has inadequate damping effect. |2.3.6c| | 4 |
| Rear Roller brake test indicates a binding brake |3.3.A1a| | 3 |
| Front shock absorber seal failed and leaking oil |2.3.3| | 3 |
| Exhaust excessively deteriorated |7.1.1a| | 3 |
| Front wheel bearings are excessively rough |2.3.5b| | 3 |
| Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 3 |
| Rear reflector missing (4.8.2 (a) (ii)) | 3 |
| Front Direction indicators affected by the operation of another lamp |1.5.1c| | 2 |
| Front Front wheel bearings are excessively rough |2.3.5b| | 2 |
| Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
| Rear Brake locking device missing |3.2.A1e| | 2 |
| Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Front position lamp does not illuminate immediately when switched on |1.1.3a| | 2 |
| Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 2 |
| Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 2 |
| Headlamp aim beam image kick up to the offside |1.6| | 2 |
| Offside Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
| Steering headbearing has excessive free play |2.2.2| | 2 |
| Rear suspension has corrosion which reduces the strength of a load bearing member or its supporting structure. |2.4.A.2d| | 2 |
| Rear Roller brake test indicates brake effort rise disproportional to brake lever or pedal effort |3.3.A1c| | 2 |
| Handlebar mounting clamp loose |2.1.1a| | 2 |
| Front Valve stem seriously damaged (5.2.3 (j)) | 2 |
| Rear position lamp does not illuminate immediately when it is switched on (1.1.3a) | 2 |
| Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
| Nearside Front Direction indicator not working |1.5.1c| | 1 |
| Fuel system component insecure |7.2.1b| | 1 |
| Front Brake effort inadequate at a wheel |1.2.1 |a| |i|| | 1 |
| Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 1 |
| Floor brake test The less effective brake control does not achieve an efficiency of 25% |1.2.2 |a| |i|| | 1 |
| Front Brake lever cannot be applied smoothly |3.1.3d| | 1 |
| Nearside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Offside Front Roller brake test indicates a binding brake |3.3.A1a| | 1 |
| Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
| Stop lamp remains on when the brake is released |1.3.1e| | 1 |
| Front Brake lever pivots excessively worn |3.1.3a| | 1 |
| Brake lever attachment screws missing |3.1.2b| | 1 |
| Offside Outer Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Rear Brake excessively binding |1.2.1 |f|| | 1 |
| Throttle operating incorrectly |6.2.7 |a| |i|| | 1 |
| Offside Front Footrest insecure |6.2.1a| | 1 |
| Front Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Offside Front Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Nearside Rear Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 1 |
| Rear Brake locking device insecure |3.2.A1e| | 1 |
| Headlamp aim headlamp damaged and function impaired |1.2.3a| | 1 |
| Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Rear Brake pedal pivots excessively worn |3.1.3a| | 1 |
| Brake drum|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Front Roller brake test indicates excessive fluctuation of brake effort |3.3.A1d| | 1 |
| Motorcycle structure excessively corroded |6.1.1a| | 1 |
| Rear Brake pedal is positioned so that the brake cannot be readily applied |3.1.3c| | 1 |
| Rear Floor brake test indicates a binding brake |3.3.C2c| | 1 |
| Throttle operating incorrectly throttle sticks and does not return until steering nearly straight. |6.2.1f| | 1 |
| Offside Rear Brake locking device missing |3.2.A1e| | 1 |
| Brake reaction bracket securing bolt|s| missing |3.2.A1j| | 1 |
| Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 1 |
| Front position lamp missing |1.1.1a| | 1 |
| Rear suspension bearing has excessive free play |2.4.A2a|i|| | 1 |
| Rear Brake reaction bracket insecure |3.2.A1j| | 1 |
| Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Front Front suspension has inadequate damping effect. |2.3.6c| | 1 |
| Front shock absorber seal failed and leaking oil os and ns front |2.3.3| | 1 |
| Brake disc|s| friction surface contaminated by oil or grease os and ns front |3.2.A1k| | 1 |
| Front position lamp incorrect colour |1.1.2a| | 1 |
| Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
| Headlamp insecure |1.2.3b| | 1 |
| Front Steering headbearing has excessive free play |2.2.2| | 1 |
| Direction indicators not working |1.5.1c| | 1 |
| Front Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Rear Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 1 |
| Offside Rear Footrest missing |6.2.1a| | 1 |
| Offside Rear Rear shock absorber seal failed and leaking oil |2.4.A.1c| | 1 |
| Rear Stop lamp not working |4.3.1 |a| |ii|| | 1 |
| Offside Rear Footrest insecure |6.2.1a| | 1 |
| Front wheel spindle securing nut|s| loose |2.3.5a| | 1 |
| Front Brake master cylinder fluid level dangerously low |3.2.B1d| | 1 |
| Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 1 |
| Exhaust markings indicating not for road use or similar wording |7.1.4| | 1 |
| Nearside Front Brake caliper|s| securing bolt|s| loose |3.2.A1j| | 1 |
| Front shock absorber seal failed and leaking oil nearside and offside |2.3.3| | 1 |
| Nearside Front Brake hose leaking fluid |3.2.B4| | 1 |
| Front Throttle operating incorrectly |6.2.1f| | 1 |
| Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
| Brake component has an inadequate repair |3.1.5| | 1 |
| Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
| Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
| Nearside Front Upper Fuel pipe leaking |7.2.1a| | 1 |
| Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
| Offside Rear Direction indicators not working |1.5.1c| | 1 |
| Rear Floor brake test indicates a sticking brake |3.3.C2c| | 1 |
| Nearside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
| Central Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
| Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
| Handlebar retaining device loose |2.2.1 |b| |i|| | 1 |
| Stop lamp remains on when the brakes are released | 1 |
| Rear position lamp obscured more than 50% |1.1.1d| | 1 |
| Nearside Rear Direction indicator not working |1.5.1c| | 1 |
| Nearside Stop lamp|s| not working |4.3.1 |a| |ii|| | 1 |
| Offside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
| Rear Motorcycle structure excessively corroded swinging arm |6.1.1a| | 1 |
| Front Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
| Front Horn not working |1.7.3a| | 1 |
| Steering control fouling between components which interferes with the free movement of the steering |2.1.2a| | 1 |
| Indicator switch insecure |1.5.4| | 1 |
| Headlamp switch insecure |1.2.4| | 1 |
| Headlamp switch faulty pass button not working |1.2.4| | 1 |
| Direction indicators flashing less than 60 times a minute |1.5.1c| | 1 |
| Front Brake master cylinder insecurely mounted |3.2.B1a| | 1 |
| Riders seat insecure |6.2.1a| | 1 |
| Stop lamp emits other than a steady red light |1.3.1b| | 1 |
| Nearside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Offside Front Brake disc|s| excessively worn |3.2.A1l| | 1 |
| Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
| Rear suspension bearing has excessive free play swing arm |2.4.A2a|i|| | 1 |
| Offside Exhaust excessively deteriorated |7.1.1a| | 1 |
| Front Headlamp dipped beam affected by the operation of another lamp |1.2.2c| | 1 |
| Rear Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
| Front Brake component leaking fluid |3.2.B4| | 1 |
| Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
| Nearside Front Shock absorber has a serious fluid leak oil leaking onto brakes (5.3.2 (b)) | 1 |
| Front Brake excessively binding (1.2.1 (f)) | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure split pin missing rear brake anchor arm (6.1.1 (b) (i)) | 1 |
| Wheel bearing play so excessive that directional control is impaired (5.1.3 (a) (ii)) | 1 |
| Motorcycle structure joining/attachment plate or fastening insecure Gear selector arm, ball pivot adrift (6.1.1 (b) (i)) | 1 |
| Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced Swinging arm rusted out. (6.1.1 (c) (i)) | 1 |
| Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |
| Position lamp not working (4.2.1 (a)) | 1 |
| Front Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
| Nearside Rear Lower Direction indicator not working (4.4.1 (a) (ii)) | 1 |
| Direction indicators not working (1.5.1c) | 1 |
| Stop lamp does not illuminate immediately a brake applies (1.3.1a) | 1 |
| Nearside Handlebar handgrip not secure to handlebars. (2.1.1c) | 1 |
| Rear Brake locking device missing (3.2.A1e) | 1 |
| Front wheel bearings have excessive free play (2.3.5b) | 1 |
| Lower Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Position lamp switch does not illuminate all position lamps with a single operation position and headlamps not working (4.2.2 (a)) | 1 |
| Horn not working (7.7 (a) (ii)) | 1 |
| Nearside Rear Axle fractured Weld cracked (5.1.1 (a)) | 1 |
| Nearside Rear Direction indicator likely to become detached (4.4.1 (c) (ii)) | 1 |
| Nearside Front Handlebar grip insecure to handlebar (2.2.1 (d) (ii)) | 1 |
| Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
| Fuel pipe so insecure there is a risk of fire fuel line to right carb split (6.1.3 (a) (ii)) | 1 |
| Brake component insecure rear brake control arm missing split pins (1.1.21 (c)) | 1 |
| Headlamp aim projected beam image obviously incorrect (4.1.2 (c)) | 1 |
| Front Roller brake test indicates a binding brake (3.3.A1a) | 1 |
| Handlebar so insecure it is likely to become detached (2.2.1 (b) (ii)) | 1 |
| Rear Wheel spindle locking device missing (5.2.1 (d)) | 1 |
| Rear Wheel fixing loose (multiple fixings) (5.2.1 (a) (i)) | 1 |
| Front Wheel fixing loose (multiple fixings) (5.2.1 (a) (i)) | 1 |
| Front Wheel bearing rough when rotated (5.1.3 (b) (i)) | 1 |
| Nearside Front Shock absorber has a serious fluid leak (Fork Seal) (5.3.2 (b)) | 1 |
| Offside Front Shock absorber has a serious fluid leak (Fork Seal) (5.3.2 (b)) | 1 |
| Offside Rear Lower Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition (8.1.1 (a)) | 1 |
| Central Front Exhaust has a major leak of exhaust gases (6.1.2 (a)) | 1 |
| Nearside Front Brake component inadequately mounted Disc bolt missing (1.1.21 (c)) | 1 |