Most common failures | No# failures |
---|
Headlamp aim out of alignment | 45 |
Offside Front shock absorber seal failed and leaking oil |2.3.3| | 13 |
Registration plate issues | 13 |
Exhaust is leaking and excessively noisey |7.1.1b| | 12 |
Nearside Front shock absorber seal failed and leaking oil |2.3.3| | 10 |
Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 9 |
Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 8 |
Front wheel bearings have excessive free play |2.3.5b| | 7 |
Throttle operating incorrectly |6.2.1f| | 6 |
Rear reflector on motorcycle missing |1.4.1| | 6 |
Front wheel bearings are excessively rough |2.3.5b| | 5 |
Headlamp at least one does not illuminate on dipped beam |1.2.2a|i|| | 4 |
Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 4 |
Front position lamp does not illuminate immediately when switched on |1.1.3a| | 4 |
Rear position lamp does not illuminate immediately when it is switched on |1.1.3a| | 4 |
Headlamp at least one does not illuminate on main beam |1.2.2a|ii|| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motor bicycle fitted with a standard silencer in average condition |7.1.2| | 3 |
Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 3 |
Horn not working |1.7.3a| | 3 |
Exhaust excessively deteriorated |7.1.1a| | 3 |
Nearside Handlebar handgrip not secure to handlebars. |2.1.1c| | 3 |
Stop lamp remains on when the brakes are released | 3 |
Front Roller brake test indicates a binding brake |3.3.A1a| | 3 |
Exhaust noise is clearly in excess of that emitted by a similar motorcycle fitted with a standard silencer in average condition |8.1.1 |a|| | 2 |
Rear Roller brake test indicates a binding brake |3.3.A1a| | 2 |
Riders seat insecure |6.2.1a| | 2 |
Front Front wheel bearings have excessive free play |2.3.5b| | 2 |
Centre Exhaust excessively deteriorated |7.1.1a| | 2 |
Centre Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Offside Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 2 |
Front Front shock absorber seal failed and leaking oil |2.3.3| | 2 |
Front Brake disc|s| friction surface contaminated by oil or grease |3.2.A1k| | 2 |
Front Headlamp insecure |1.2.3b| | 2 |
Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 2 |
Nearside Front Direction indicator not working |4.4.1 |a| |ii|| | 2 |
Centre Rear Lower Exhaust is leaking and excessively noisey |7.1.1b| | 2 |
Front suspension has inadequate damping effect. |2.3.6c| | 2 |
Offside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Brake excessively binding (1.2.1 (f)) | 2 |
Nearside Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 2 |
Front Brake excessively binding |1.2.1 |f|| | 1 |
Lower Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Rear Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Rear Rear reflector on motorcycle missing |1.4.1| | 1 |
Rear wheel bearings have excessive free play |2.4.A.2c| | 1 |
Offside Rear Direction indicator not working |1.5.1c| | 1 |
Horn is not a constant note |1.7.3c| | 1 |
Front Brake hose is likely to be fouled or trapped by moving parts |3.2.B2c| | 1 |
Horn emits 2 or more alternating tones |1.7.3b| | 1 |
Steering movement excessively `notchy` with the weight on the lower bearing |2.2.1a| | 1 |
Rear Position lamp not working |4.2.1 |a|| | 1 |
Registration plate lamp issues | 1 |
Offside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Nearside Front Brake pipe union leaking fluid |3.2.B4| | 1 |
Exhaust has part of the system missing |7.1.1a| | 1 |
Front Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Steering movement excessively stiff with the weight on the lower bearing |2.2.1a| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Nearside Rear Direction indicator not working |1.5.1c| | 1 |
Offside Rear suspension fouling which affects the movement of the rear suspension |2.4.A.3a| | 1 |
Outer Front Lower Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Shock absorber has negligible damping effect |5.3.2 |b|| | 1 |
Front Brake disc contaminated OIL |1.1.14 |b|| | 1 |
Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Offside Front Throttle has a significant change in engine speed whilst moving the steering from lock to lock |2.1.4| | 1 |
Offside Rear Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Front Steering movement excessively `notchy` with the wheel raised |2.2.1b| | 1 |
Offside Handlebar handgrip not secure to handlebars. |2.1.1c| | 1 |
Nearside Rear Service brake grabbing severely |1.2.1 |c|| | 1 |
Offside Rear Service brake grabbing severely |1.2.1 |c|| | 1 |
Vehicle structure is so deformed it is likely to adversely affect braking or steering front wheel alignment |6.1.1 |a| |ii|| | 1 |
Rear Axle insecure such that functionality is affected |5.1.1 |b| |ii|| | 1 |
Nearside Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Offside Rear reflector missing |4.8.2 |a| |ii|| | 1 |
Nearside Rear Position lamp lens seriously defective incorrectly positioned |4.2.1 |b|| | 1 |
Offside Rear Position lamp lens seriously defective incorrectly positioned |4.2.1 |b|| | 1 |
Suspension component likely to fail diff bearing |5.3.3 |b| |ii|| | 1 |
Rear Stop lamp not working opperated |4.3.1 |a| |ii|| | 1 |
Steering headbearing has excessive wear or free play |2.2.2 |f| |i|| | 1 |
Rear Stop lamp remains on when the brake is released |1.3.1e| | 1 |
Rear wheel spindle securing nut locking device missing |2.4.A.2b| | 1 |
Front Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Offside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected Throttle opens on RH lock |6.2.7 |a| |ii|| | 1 |
Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Front shock absorber seal failed and leaking oil offside |2.3.3| | 1 |
Nearside Indicator switch does not operate the direction indicators on the side selected |1.5.4| | 1 |
Horn not loud enough to be heard by another road user |1.7.3a| | 1 |
Headlamp aim beam image too far to the right |1.6.4| | 1 |
Nearside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Front Direction indicator affected by the operation of another lamp |1.5.1c| | 1 |
Offside Rear wheel spindle securing nut|s| loose |2.4.A.2b| | 1 |
Direction indicators not working |1.5.1c| | 1 |
Nearside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Offside Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Rear Motorcycle structure excessively corroded |6.1.1a| | 1 |
Front Stop lamp does not illuminate immediately a brake applies |1.3.1a| | 1 |
Rear Brake pedal cannot be released smoothly |3.1.3d| | 1 |
Brake locking device insecure |3.2.A1e| | 1 |
Stop lamp not working |4.3.1 |a| |ii|| | 1 |
Offside Front Brake disc contaminated |1.1.14 |b|| | 1 |
Nearside Front Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Front Shock absorber has a serious fluid leak |5.3.2 |b|| | 1 |
Front Exhaust has a major leak of exhaust gases |6.1.2 |a|| | 1 |
Front shock absorber seal failed and leaking oil |2.3.3| | 1 |
Rear Stop lamp does not emit a steady light |1.3.1b| | 1 |
Rear Roller brake test indicates a severely grabbing brake |3.3.A1b| | 1 |
Nearside Rear Direction indicator not working |4.4.1 |a| |ii|| | 1 |
Brake disc|s| excessively worn |3.2.A1l| | 1 |
Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Nearside Footrest insecure |6.2.1a| | 1 |
Fuel hose leaking |7.2.1a| | 1 |
Front Direction indicators not working |1.5.1c| | 1 |
Nearside Front Front position lamp does not illuminate immediately when switched on |1.1.3a| | 1 |
Headlamp aim beam image kick-up is to the offside |1.6.1| | 1 |
Centre Front All position lamps do not illuminate immediately when switched on |1.1.3a| | 1 |
Offside Front Shock absorber has a serious fluid leak fork seal |5.3.2 |b|| | 1 |
Front Wheel bearing so rough it is likely to overheat or break up |5.1.3 |b| |ii|| | 1 |
Position lamp switch allows the rear position lamp to be switched off when the headlamp|s| are on |4.2.2 |a|| | 1 |
Nearside Front Direction indicator not working |1.5.1c| | 1 |
Headlamp insecure |1.2.3b| | 1 |
Offside Front Direction indicator not working |1.5.1c| | 1 |
Brake pedal insecure |3.1.2a| | 1 |
Front Brake pedal cannot be applied smoothly |3.1.3d| | 1 |
Steering movement excessively stiff with the wheel raised |2.2.1b| | 1 |
Front Steering headbearing has excessive free play |2.2.2| | 1 |
Front Roller brake test indicates a severely juddering brake |3.3.A1b| | 1 |
Rear shock absorber has inadequate damping effect. |2.4.A.3b| | 1 |
Steering headbearing has excessive free play |2.2.2| | 1 |
Service brake: efficiency below requirements |3.7.C.1a| | 1 |
Offside Rear Motorcycle structure corroded to the extent that the rigidity of the assembly is significantly reduced swinging arm holed very dangerous dont use |6.1.1 |c| |i|| | 1 |
Offside Rear Exhaust mounting does not fully support the exhaust system |7.1.1.c| | 1 |
Front Floor brake test indicates a binding brake |3.3.C2c| | 1 |
Lower Exhaust is leaking and excessively noisey |7.1.1b| | 1 |
Nearside Rear Rear wheel rotation likely to be impeded |6.2.1b| | 1 |
Nearside Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Offside Front Lower Roller brake test indicates a binding brake |3.3.A1a| | 1 |
Nearside Front Footrest insecure |6.2.1a| | 1 |
Direction indicators flashing more than 120 times per minute |1.5.1c| | 1 |
Locking devices not correctly fitted which may make the motor bicycle dangerous to ride Side stand nut missing. |6.2.1h| | 1 |
Nearside Locking devices not correctly fitted which may make the motor bicycle dangerous to ride |6.2.1h| | 1 |
Front Brake lever has inadequate reserve travel |3.1.3b| | 1 |
Handlebar mounting clamp bolt loose |2.1.1a| | 1 |
Nearside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Offside Front Brake disc|s| cracked |3.2.A1g| | 1 |
Hazard warning switch missing |1.4.B.1d| | 1 |
Hazard warning lamps inoperative |1.4.B.1b| | 1 |
Rear Parking brake efficiency below requirements |3.7.B.7| | 1 |
rear brake recording little or no effort |3.7.B.5a| | 1 |
Nearside Brake cable locking device insecure |3.5.1l| | 1 |
Offside Brake cable locking device missing |3.5.1l| | 1 |
Nearside Brake cable locking device missing |3.5.1l| | 1 |
Brake cable has restricted free movement |3.5.1k| | 1 |
Offside Front Brake disc contaminated (1.1.14 (b)) | 1 |
Throttle control functioning such that safe operation of the motorcycle is adversely affected (6.2.7 (a) (ii)) | 1 |
Throttle operating incorrectly accelerates on right lock (6.2.7 (a) (i)) | 1 |
Offside Front Brake hose leaking (1.1.12 (c)) | 1 |
Stop lamp(s) remains on when the brakes are released (4.3.2 (a) (iii)) | 1 |
Rear Rear reflector missing (4.8.2 (a) (ii)) | 1 |
Front Upper Steering headbearing has excessive wear or free play (2.2.2 (f) (i)) | 1 |
Front Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
Rear Footrest missing Both (6.2.12 (a)) | 1 |
Shock absorber has a serious fluid leak (5.3.2 (b)) | 1 |
All direction indicators not working (4.4.1 (a) (ii)) | 1 |
Rear Position lamp not working (4.2.1 (a)) | 1 |
Nearside Front Direction indicator not working (4.4.1 (a) (ii)) | 1 |
Front Position lamp not working (4.2.1 (a)) | 1 |
Headlamp aim projected beam image obviously incorrect kick up to offside (4.1.2 (c)) | 1 |
Front Horn sound not in accordance with requirements (7.7 (c)) | 1 |
Rear Brake pedal is so short that the brake cannot be readily applied (1.1.2 (d)) | 1 |
Front Stop lamp not working (4.3.1 (a) (ii)) | 1 |
Front Wheel spindle loose (5.2.1 (c) (i)) | 1 |
Offside Rear Wheel bearing play so excessive it is likely to break up (5.1.3 (a) (ii)) | 1 |
Central Front Wheel bearing has excessive play (5.1.3 (a) (i)) | 1 |